DOWNLOAD Sharp AR-203 (serv.man5) Service Manual ↓ Size: 14.96 MB | Pages: 127 in PDF or view online for FREE

AR-203E/5420/M200/M201  SIMULATION, TROUBLE CODES  10 - 12

24

06

Developer counter clear

[Function]
When [OK]/[ENTER]/[START] key is pressed, the developer counter value is cleared to 0, and
"000,000" is displayed.

07

Drum counter clear

[Function]
When [OK]/[ENTER]/[START] key is pressed, the drum counter value is cleared to 0, and
"000,000" is displayed on the LCD/display.

08

Copy counter clear

[Function]
When [OK]/[ENTER]/[START] key is pressed, the copy counter value is cleared to 0, and
"000,000" is displayed on the LCD/display.

09

Printer counter clear

[Function]
When [OK]/[ENTER]/[START] key is pressed, the printer counter value is cleared to 0, and
"000,000" is displayed on the LCD/display.

10

FAX counter clear 
(Executable only when the 
FAX is installed.)

[Function]
When [OK]/[ENTER]/[START] key is pressed, the FAX count value is set to 0 and "000,000" is
displayed on the LCD.

13

Scanner counter clear

[Function]
When [OK]/[ENTER]/[START] key is pressed, the scanner counter value is cleared to 0, and 
"000,000" is displayed on the LCD/display.

14

SPF/RSPF JAM total 
counter clear (Only the 
AR-203E/M200/M201 with 
the SPF/RSPF installed)

[Function]
When [OK]/[ENTER]/[START] key is pressed, the SPF/RSPF JAM total counter value is cleared
to 0, and "000,000" is displayed on the LCD/display.

Main 
code

Sub 

code

Contents

Details of function/operation

1) Initial display

The operation is similar to simulation 20-01.

24-06 DVLP CLR.

CLEARED       000,000

1) Initial display

The operation is similar to simulation 20-01.

24-07 DRUM CLR.

CLEARED       000,000

1) Initial display

The operation is similar to simulation 20-01.

24-08 COPIES CLR.

CLEARED       000,000

1) Initial display

The operation is similar to simulation 20-01.

24-09 PRT.CLR.

CLEARED       000,000

1) Initial display

24-10 FAX CLR.

CLEARED       000,000

1) Initial display

The operation is similar to simulation 20-01.

24-13 SCAN CLR.

CLEARED       000,000

1) Initial display

The operation is similar to simulation 20-01.

24-14 S JAM TTL CLR.

CLEARED       000,000

AR-203E/5420/M200/M201  SIMULATION, TROUBLE CODES  10 - 13

24

15

Scanner mode counter clear 
(AR-203E/M200/M201)

[Function]
When [OK]/[ENTER]/[START] key is pressed, the scanner mode counter value is cleared to 0,
and "000,000" is displayed on the LCD/display.

25

01

Main motor operation check 
(Cooling fan motor rotation 
check)

[Function]
When [OK]/[ENTER]/[START] key is pressed, the main motor (and the duplex motor in the case
of a duplex model) is operated for 30sec.
To reduce toner consumption, if the developing unit is installed, the developing bias, the main
charger, and the grid are also outputted.
In this case, laser discharge is required when stopping the motor, the polygon motor is also
operated at the same time. Check for installation of the developing unit. If it is not installed, the
high voltage above is not outputted and only the motor is rotated.
To check the developing bias, install the developing unit.
After completion of 30sec operation, the machine goes into the sub code entry standby mode.

10

Polygon motor ON

[Function]
When [OK]/[ENTER]/[START] key is pressed, the Bios is called to rotate the polygon motor for
30sec.
After completion of 30sec operation, the operation is turned off with the Bios and the machine
goes into the sub code entry standby mode.

26

02

SPF/RSPF setup

[Function]
When this simulation is executed, the current set SPF/RSPF is displayed. Enter the code num-
ber corresponding to the desired SPF/RSPF and press [OK]/[ENTER]/[START] key to save the
setting.

03

Second cassette setup

[Function]
When this simulation is executed, the current set second cassette is displayed. Enter the code
number corresponding to the desired second cassette and press [OK]/[ENTER]/[START] key to
save the setting.

[Operation]
The operation is similar to simulation 26-02.

Main 
code

Sub 

code

Contents

Details of function/operation

1) Initial display

The operation is similar to simulation 20-01.

24-15 S-MODE CLR.

CLEARED       000,000

1) Initial display

25-01 MAIN MOTOR CHK

EXECUTING...

1) Initial display

25-10 LSU CHK

EXECUTING...

For the AR-203E/5420, the code number cannot be set to 2.
For the AR-M200/M201, the code number cannot be set to 1.

Code number

SPF/RSPF

Display item

0

SPF  NO

SPF  OFF

1

SPF YES

SPF ON

2

RSPF YES

RSPF ON

1) The current set value is

displayed.

2) [Numeric] key or [

] key

2) [Numeric] key or [

] key

3) [OK]/[ENTER]/[START]

key

1) Press [ ] [ ] key to

change the code number. 

2) Press [START] key to fix

the code number.

26-02 SPF/RSPF

1:SPF  ON   (0- 2)

26-02 SPF/RSPF

0:SPF  OFF (0- 2)

26-02 SPF/RSPF

2:RSPF ON  (0- 2)

26-02 SPF/RSPF

2:RSPF ON  (0- 2)

For the AR-203E/5420/M200/M201, the code number cannot be set to 1.

Code number

Second cassette

Display item

0

Second cassette NO

OFF

1

Second cassette YES

ON

AR-203E/5420/M200/M201  SIMULATION, TROUBLE CODES  10 - 14

26

04

Machine duplex setup

[Function]
When this simulation is executed, the current set duplex is displayed. Enter the code number
corresponding to the desired duplex and press [OK]/[ENTER]/[START] key to save the setting.

[Operation]
The operation is similar to simulation 26-02.

06

Destination setup

[Function]
When this simulation is executed, the current set destination is displayed. Enter the code num-
ber corresponding to the desired destination and press [OK]/[ENTER]/[START] key to save the
setting.

[Operation]
The operation is similar to simulation 26-02.

07

Machine conditions check

[Function]
When this simulation is executed, the current machine setting is displayed.

20

Rear edge void setup

[Function]
When this simulation is executed, the current set rear edge void is displayed. Enter the code
number corresponding to the desired rear edge void and press [OK]/[ENTER]/[START] key to
save the setting.

[Operation]
The operation is similar to simulation 26-02.

30

CE mark support control 
ON/OFF

[Function]
When this simulation is executed, the current set CE mark support control is displayed. Enter
the code number corresponding to the desired CE mark support control and press [OK]/
[ENTER]/[START] key to save the setting.

[Operation]
The operation is similar to simulation 26-02.

37

Cancel of stop at developer 
life over

[Function]
When this simulation is executed, the current setting is displayed. Enter the code number and
press [OK]/[ENTER]/[START] key to change the setting.

[Operation]
The operation is similar to simulation 21-01.

39

Memory capacity check

[Function]
When the simulation is executed, the currently installed SDRAM of the main unit is displayed.

Main 
code

Sub 

code

Contents

Details of function/operation

* AR-203E/5420/M200: cannot be executed.

Code number

Duplex

Display item

0

Duplex NO

OFF

1

Duplex YES*

ON

* Code number 2 cannot be selected.

Code number

Destination

Display item

0

Inch series

INCH

1

EX Japan AB series

AB

2

Japan AB series

–

CPM

Copy quantity 

Remark

20 CPM

20

1) The machine setting is displayed. 

26-07 CPM

20 CPM

Code number

Setting

Display item

Remark

0

Rear edge void NO

OFF

1

Rear edge void YES

ON

Default

Code number

Setting

Display item

Remark

0

CE mark support control OFF

OFF

Default (100V series)

1

CE mark support control ON

ON

Code number

Setting

Remark

8

8  MBYTE

16

16 MBYTE

1) Memory capacity display 

26-39 MEM.CHK

8 MBYTE

AR-203E/5420/M200/M201  SIMULATION, TROUBLE CODES  10 - 15

26

40

Polygon motor OFF time 
setup (Time required for 
turning OFF after completion 
of printing)

[Function]
When this simulation is executed, the current setting is displayed. Enter the code number corre-
sponding to the desired setting and press [OK]/[ENTER]/[START] key to save the setting.

[Operation]
The operation is similar to simulation 26-02.

42

Transfer ON timing control 
setup

Main 
code

Sub 

code

Contents

Details of function/operation

Code number

Setting

Display item

Remark

AR-M200/M201

AR-203E/5420

0

0sec

0 SEC.

0

1

30sec

30 SEC.

30

Default

2

60sec

60 SEC.

60

3

90sec

90 SEC.

90

When this simulation is executed, the currently set code number is displayed.
Enter the code number and press the [START] key, and the setting will be changed. (For any
number different from the following ones, the default time is automatically set.)
<Paper lead edge adjustment table>

* The default value, "11," of the transfer ON timing indicates "236msec passed from PS

release."

* When set to "0," it is same as setting to the default, "11."

* The transfer ON timing can be adjusted to 236msec ± 2ms.

For the AR-M200/M201, the adjustment can be made individually for each of the following
modes.

<Paper lead edge adjustment table> is the same as that of the AR-203E/5420 above.

<Front/back surface of paper rear edge adjustment table>

* The default "50" of the transfer OFF timing indicates "210msec passed from PPD1OFF."

* The transfer OFF timing can be adjusted to 210msec ± 2ms.

Code number

Setting

Code number

Setting

0

Default (236 msec)

 11

Default (236 msec)

1

–20 msec

 12

+2 msec

2

–18 msec

 13

+4 msec

3

–16 msec

 14

+6 msec

4

–14 msec

 15

+8 msec

5

–12 msec

 16

+10 msec

6

–10 msec

 17

+12 msec

7

–8 msec

 18

+14 msec

8

–6 msec

 19

+16 msec

9

–4 msec

 20

+18 msec

 10

–2 msec

 21

+20 msec

Mode

Display item

Default

Setting range

Front surface paper lead edge

F-REAR

 11

0 - 21

Front surface paper rear edge

F-END

 50

1 - 99

Back surface paper lead edge

B-REAR

 11

0 - 21

Back surface paper rear edge

B-END

 50

1 - 99

Code

Setting

Remark

1

–98 msec

. . .

. . .

49

–2 msec

50

0 msec

Default

51

+2 msec

. . .

. . .

99

+98 msec

1) Initial display 

<Front surface lead edge setting>

2) [

] [

] key: Mode selection

3) [Numeric] key: Value entry

4) [OK]/[ENTER]/[START] key: 

Settles the entered value. The display is
shifted to the sub code input standby
menu.

26-42 TC ON TIMING

F-REAR     11( 0-21 )

26-42 TC ON TIMING

F-END      50( 1-99 )

26-42 TC ON TIMING

F-END      51( 1-99 )