Sharp PN-Y325 Service Manual ▷ View online
PN-Y325/Y425/Y475/Y555 INSTALLATION, ADJUSTMENT, SETTING 2 - 17
1-4.CONNECTING THE POWER CORD
<Caution>
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
[PN-Y325]
[PN-Y425/Y475/Y555]
1-5.BINDING CABLES
The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.
Attach the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables.
1-6.Setting the USB flash drive cover
1. Insert the USB flash drive into the USB port.
PN-Y325/Y425/Y475/Y555 INSTALLATION, ADJUSTMENT, SETTING 2 - 18
2. Attach the USB flash drive cover and secure with the provided screw.
<MEMO>
If the USB flash drive will be attached, use a USB flash drive with dimensions no greater than 1-15/16 inch (50 mm) (L) × 13/16 inch (20
mm) (W) × 1/2 inch (12 mm) (H).
PN-Y325/Y425/Y475/Y555 INSTALLATION, ADJUSTMENT, SETTING 2 - 19
2. ADJUSTMENT
2-1.Screen display for adjustment
Before making adjustments in the SCREEN menu or PICTURE menu, display an image to brighten the entire screen. If you are using a
Windows PC, use the adjustment pattern on the supplied CD-ROM.
Opening the adjustment pattern
The following example is performed in Windows 7.
1. Load the supplied CD-ROM into the computer’s CDROM drive.
2. Open [CD Drive] in [Computer].
3. Double-click [Adj_uty.exe].
The adjustment pattern will appear.
Adjust the screen automatically or manually.
4. When adjustment is finished, press the [Esc] on the computer’s keyboard to quit the adjustment program.
5. Eject the CD-ROM from the CD-ROM drive.
<MEMO>
• If the display mode on the computer you are using is 65,000 colors, the color levels in the color pattern may appear differently or
grayscale may appear to be colored.
(This is due to the specifications of the input signal and is not a malfunction.)
PN-Y325/Y425/Y475/Y555 INSTALLATION, ADJUSTMENT, SETTING 2 - 20
3. MENU ITEMS
3-1.Menu item details
ITEMS
CONTENT
SCREEN
AUTO(D-SUB[RGB])
The H/V-POS, etc. are automatically adjusted.
H/V-POS
Adjust the horizontal and vertical position of the image.
SIZE
Changes the screen size. The screen size can also be
changed using a remote control unit.
ZOOM (HDMI[AV]/D-SUB[COMPONENT]/D-SUB[VIDEO])
Enlarge and display part of the image.
INPUT SIGNAL (D-SUB[RGB])
If a computer connected to the D-SUB output any of the
following resolution, make a selection from the following
options.
768..1024x768, 1280x768, 1360x768 or 1366x768
RESET
Resets the values of the SCREEN menu items to the factory
preset values.
Select “ON” and then press [ENTER].
PICTURE BRIGHT
Adjusts
the backlight brightness.
CONTRAST
Adjusts the difference between the bright and dark portions
of the image.
BLACK LEVEL
Adjusts the entire brightness of the video signals.
TINT
Adjusts the hue. Selecting - changes the color towards
magenta, and selecting + changes it towards green.
COLORS
Adjusts the color intensity.
SHARPNESS
(HDMI[AV]/D-SUB[COMPONENT]/D-SUB[VIDEO])
Adjusts the sharpness of the image.
COLOR ADJUSTMENT
COLOR MODE
Changes the color mode on the screen. The color mode on
the screen can also be changed using a remote control unit.
* sRGB is DVI-D, HDMI[PC], D-SUB[RGB] input only.
WHITE BALANCE
THRU...Displays the input signal level as is.
PRESET...Selects the color temperature using PRESET.
USER... Used for adjusting R-/G-/B-GAIN and
R-/G-/B-OFFSET respectively.
PRESET
Selects the color temperature when the WHITE BALANCE is
set to PRESET.
The setting values are shown for reference. The color
temperature of the screen varies over time. This function is
not intended to keep the color temperature constant.
GAMMA
Selects the gamma.
ADVANCED NOISE
REDUCTION
(HDMI[AV]/D-SUB[COMPONENT]/D-SUB[VIDEO])
Reduce the noise of playback images.
HDMI RGB INPUT RANGE (HDMI[PC]/HDMI[AV])
Sets the RGB input signal range.
RESET
Resets the values of the PICTURE menu items to the factory
preset values.
Select “ON” and then press [ENTER].
AUDIO
BASS
Adjusts the volume of bass-level sound.
TREBLE
Adjusts the volume of treble-level sound.
RESET
Resets the values of the AUDIO menu items to the factory
preset values.
Select “ON” and then press [ENTER].
Click on the first or last page to see other PN-Y325 service manuals if exist.