Sharp PN-Y325 Service Manual ▷ View online
PN-Y325/Y425/Y475/Y555 OUTLINE OF THE PRODUCT 1 - 8
2-8.LAYOUT OF TERMINAL PINS
PN-Y325/Y425/Y475/Y555 OUTLINE OF THE PRODUCT 1 - 9
3. PART NAMES AND FUNCTION
3-1.DISPLAY
[PN-Y325]
[PN-Y425/Y475/Y555]
No.
Name
No.
Name
1
LCD panel
12
DVI-D input terminal
2
Remote control sensor
13
DVI-D output terminal
3
Input switch
14
LAN terminal
4
Power button
15
D-sub input terminal
5
Power LED
16
USB port
6
USB flash drive cover
17
RS-232C input terminal
7
Vents
18
RS-232C output terminal
8
Speakers
19
Audio1 input terminal
9
AC input terminal
20
Audio output terminal
10
Main power switch
21
Audio2 input terminal
11
HDMI input terminal
22
Anti-theft hole*1
*1 : A commercially available anti-theft lock can be connected.
The anti-theft hole is compatible with the Kensington Micro Saver Security System.
PN-Y325/Y425/Y475/Y555 OUTLINE OF THE PRODUCT 1 - 10
4. SCREEN DISPLAY
4-1.DUAL SCREEN DISPLAY
It is possible to display two screens simultaneously.
Set this function with PIP MODES of PIP/PbyP in the MULTI/PIP menu.
* The currently selected input signal is displayed on the main screen.
* The following combinations [A] and [B] are available for display:
[A]: DVI-D/DisplayPort/HDMI
[B]: D-SUB/COMPONENT/VIDEO
(MEMO)
• When the screen size is Dot by Dot or CUSTOM, dualscreendisplay is not possible.
• When dual-screen display is selected, the screen size cannot be set to Dot by Dot or CUSTOM.
• When PIP is selected, the sub screen is displayed at an aspect ratio of 4:3, regardless of the screen size setting.
• When PbyP is selected, the main screen and sub screen are displayed at the aspect ratio of the input signal, regardless of the screen size
setting.
• When PbyP2 is selected, the main screen and sub screen are displayed at an aspect ratio of 4:3, regardless of the screen size setting.
• When dual-screen display is selected, the SCREEN MOTION function is disabled.
• When dual-screen display is selected, the screen cannot be enlarged.
• When an interlaced signal (1080i, 480i, video) is input to the sub screen, horizontal lines may flicker. If this happens, display the image on
the main screen.
• When the main screen is DVI-D, HDMI, or DisplayPort, the input mode that can be selected is DVI-D, HDMI, or DisplayPort.
• When the main screen is D-SUB, COMPONENT, or VIDEO, the input mode that can be selected is D-SUB, COMPONENT, or VIDEO.
• In the following cases, dual-screen display is turned off:
- The power is turned off
- Input signal waiting mode is entered
• Border that represents the area in the sub-screen is displayed.
PN-Y325/Y425/Y475/Y555 OUTLINE OF THE PRODUCT 1 - 11
4-2.SWITCHING THE SCREEN SIZE
Even when the screen size is changed, the display may remain the same depending on the input signal.
<MEMO>
• Using this monitor’s screen-size switching to compress or expand the screen for commercial or public viewing in establishments like
cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be careful.
• When “Enlarge” is set, the screen size is fixed to WIDE mode.
• The appearance of the original video may change if you select a screen size with a different aspect ratio than the original image (e.g. TV
broadcast or video input from external equipment).
• When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this monitor, the edge
of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen size to NORMAL.
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using
the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This
is due to the characteristics of the software, and is not a malfunction.
• Depending on the original image size, black bands may remain at the edges of the screen.
Click on the first or last page to see other PN-Y325 service manuals if exist.