Sharp PN-Y325 Service Manual ▷ View online
PN-Y325/Y425/Y475/Y555 OUTLINE OF THE PRODUCT 1 - 4
[PN-Y555]
When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal
injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a
bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.
PN-Y325/Y425/Y475/Y555 OUTLINE OF THE PRODUCT 1 - 5
2–3.Compatible signal timing (PC)
Screen resolution
Hsync
Vsync
Dot frequency
Digital
Analog
DVI-D
HDMI
(D-SUB)
VESA
1920×1200※
74.0kHz
60Hz
154.0MHz
Yes
Yes
Yes
1680×1050
65.3kHz
60Hz
146.25MHz
Yes
Yes
Yes
1600×1200※
75.0kHz
60Hz
162.0MHz
Yes
Yes
Yes
1440×900
55.9kHz
60Hz
106.5MHz
Yes
Yes
Yes
1400×1050
65.3kHz
60Hz
121.75MHz
Yes
Yes
Yes
1360×768
47.7kHz
60Hz
85.5MHz
Yes
Yes
Yes
1280×1024
80.0kHz
75Hz
135.0MHz
Yes
Yes
Yes
64.0kHz
60Hz
108.0MHz
Yes
Yes
Yes
1280×960
60.0kHz
60Hz
108.0MHz
Yes
Yes
Yes
1280×800
49.7kHz
60Hz
83.5MHz
Yes
Yes
Yes
1280×768
47.8kHz
60Hz
79.5MHz
Yes
-
Yes
1024×768
60.0kHz
75Hz
78.75MHz
Yes
Yes
Yes
56.5kHz
70Hz
75.0MHz
Yes
Yes
Yes
48.4kHz
60Hz
65.0MHz
Yes
Yes
Yes
848×480
31.0kHz
60Hz
33.75MHz
Yes
-
Yes
800×600
46.9kHz
75Hz
49.5MHz
Yes
Yes
Yes
48.1kHz
72Hz
50.0MHz
Yes
Yes
Yes
37.9kHz
60Hz
40.0MHz
Yes
Yes
Yes
35.1kHz
56Hz
36.0MHz
-
-
Yes
640×480
37.5kHz
75Hz
31.5MHz
Yes
Yes
Yes
37.9kHz
72Hz
31.5MHz
Yes
Yes
Yes
31.5kHz
60Hz
25.175MHz
Yes
Yes
Yes
Wide
1920×1080
67.5kHz
60Hz
148.5MHz
Yes
Yes
Yes
1366×768
47.7kHz
60Hz
85.383MHz
Yes
Yes
Yes
1280×720
44.7kHz
60Hz
74.4MHz
Yes
Yes
Yes
USTEXT
720×400
31.5kHz
70Hz
28.3MHz
Yes
Yes
Yes
* Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
・Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.
・The frequency values for the Sun are reference values.
PN-Y325/Y425/Y475/Y555 OUTLINE OF THE PRODUCT 1 - 6
2-4.Compatible signal timing (AV)
Screen resolution
Frequency
HDMI
Component
1920 × 1080p
24Hz
Yes -
50Hz
Yes
Yes
59.94Hz
Yes
Yes
60Hz
Yes
Yes
1920 × 1080i
50Hz
Yes
Yes
59.94Hz
Yes
Yes
60Hz
Yes
Yes
1280 × 720p
50HZ
Yes
Yes
59.94Hz
Yes
Yes
60Hz
Yes
Yes
720 × 576p
50Hz
Yes
Yes
720 × 480p
59.94Hz
Yes
Yes
60Hz
Yes
Yes
640 × 480p(VGA)
59.94Hz
Yes
-
60Hz
Yes
-
720(1440) × 576i
50Hz
Yes
Yes
720(1440) × 480i
59.94Hz
Yes
Yes
60Hz
Yes
Yes
2-5.Power management
This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in
order for the monitor’s power management function to work.
DPMS:Display Power Management Signaling
DMPM:Digital Monitor Power Management
DPMS
Screen
Power
consumption
Hsync
Vsync
DMPM
Screen
Power
consumption
NO STATE
Display
56W
120W
135W
150W
Yes Yes Monitor ON
Display
56W
120W
135W
150W
STANDBY
No
display
11W
16W
16W
16W
No Yes
Active OFF
No
display
11W
16W
16W
16W
SUSPEND Yes
No
OFF STATE
No
No
*Values of the PN-Y555, PN-Y475, and PN-Y425 in that order from the top.
2-6.DDC(plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
PN-Y325/Y425/Y475/Y555 OUTLINE OF THE PRODUCT 1 - 7
2-7.SUPPLIED COMPONENTS
If any component should be missing, please contact your dealer.
Liquid Crystal Display Monitor: 1
Remote control unit: 1
Cable clamp: 2
Power cord: 1
R-6 battery (“AA” size): 2
CD-ROM (Utility Disk for Windows): 1
Setup Manual: 1
Vertical sticker (Logo): 1
Vertical sticker (Operation panel): 1
USB flash drive cover: 1
USB flash drive cover screw: 1
Model Name / Serial No. label: 1
Indicates the model name and serial number.
Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover the logo.
Stand hole protection cover: 2 (PN-Y425/Y475/Y555 only)
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
Click on the first or last page to see other PN-Y325 service manuals if exist.