Sharp UP-3500 (serv.man25) Service Manual ▷ View online
Page 25 - 39
32.
Clerk Real Key at the ECR with an Orderman system.
Now it is possible to process Orderman registrations, even a Clerk Real Key is assigned at
ECR.
In case a normal transaction has been started, this transaction will be placed in the background.
After the Orderman registration has been processed, the former registration will be recalled.
GLU registrations will be finalized with NBAL.
The start of such an action is defined by the setting of the Orderman Clear Timer.
ECR.
In case a normal transaction has been started, this transaction will be placed in the background.
After the Orderman registration has been processed, the former registration will be recalled.
GLU registrations will be finalized with NBAL.
The start of such an action is defined by the setting of the Orderman Clear Timer.
33.
Orderman Clear Timer.
With this version, the Orderman Clear Timer is also active for normal registration (not only
active for GLU registrations). In the previous version, if an Orderman registration has been
received, only an open GLU registration was finalized with NBAL after the specified Clear Timer
time.
active for GLU registrations). In the previous version, if an Orderman registration has been
received, only an open GLU registration was finalized with NBAL after the specified Clear Timer
time.
34.
Orderman Media Key text.
It is now possible to set for every Orderman media key its own description text. After
downloading the preset data to the OM, these media text will be displayed in the finalization
screen for each selected media at the OM.
downloading the preset data to the OM, these media text will be displayed in the finalization
screen for each selected media at the OM.
Page 26 - 39
35.
Bill separation, performed at an Orderman terminal.
In the previous version, a Bill Separation from the Orderman has been treated as a void.
Now, a Bill Separation from the Orderman will be marked with BS at the ECR’s E/J or journal
print and is no longer treated as a Void.
Now, a Bill Separation from the Orderman will be marked with BS at the ECR’s E/J or journal
print and is no longer treated as a Void.
36.
Entry error by bill split operation at Orderman if “ISSUE ITEM VOID” is prohobited.
A bill split at the Orderman hand held will result in an error, if the function “ISSUE ITEM VOID”
in PGM2 MODE\SETTING\OPTIONAL\FUNCTION PROHIBITED is set to limited. With this
version, the bill-split function at the Orderman becomes available even under above-mentioned
setting.
in PGM2 MODE\SETTING\OPTIONAL\FUNCTION PROHIBITED is set to limited. With this
version, the bill-split function at the Orderman becomes available even under above-mentioned
setting.
37.
Bill separation on the same table number at Orderman.
In the previous version, article loss could be happen if a bill separation has been carried out
were the target table number is the same number as the source table number. By the new
version, if by mistake the same number has been entered, a pop up error message appear at
the Orderman. Even, after confirmation of the error message, the Orderman is in the finalisation
mode, it is possible to cancel the action. No articles will be lost anymore.
were the target table number is the same number as the source table number. By the new
version, if by mistake the same number has been entered, a pop up error message appear at
the Orderman. Even, after confirmation of the error message, the Orderman is in the finalisation
mode, it is possible to cancel the action. No articles will be lost anymore.
38.
Bill separation of smaller quantity for the article could result in data loss.
If a separation for an article, with a quantity smaller than the total quantity of this article, has to
be done, the entered quantity will be separated to the target table correctly, but all quantity of
this article will be deleted form the source table. This has been corrected by this ROM- Version.
be done, the entered quantity will be separated to the target table correctly, but all quantity of
this article will be deleted form the source table. This has been corrected by this ROM- Version.
39.
VIP Sales function with additional totalizers for TAX.
In order to record in more detail "Own consumption / Invitation / Personal consumption”
additional totalizers (Taxable amount for each Tax) are introduced for each VIP1-3 totalizers.
additional totalizers (Taxable amount for each Tax) are introduced for each VIP1-3 totalizers.
- Total amount (as current)
- Taxable amount for each Tax
- Taxable amount for each Tax
This is valid for VAT1 to 6 depending on VAT assignment and
VAT Shift.
On the right side is a report print sample for a registration of:
Three items, one assigned for VAT1, one for VAT3 and one for
VAT5 for VIP1 sales.
Two items, one assigned for VAT2 and one for VAT4 for VIP2
sales.
One item assigned for VAT6 for VIP3 sales.
VAT Shift.
On the right side is a report print sample for a registration of:
Three items, one assigned for VAT1, one for VAT3 and one for
VAT5 for VIP1 sales.
Two items, one assigned for VAT2 and one for VAT4 for VIP2
sales.
One item assigned for VAT6 for VIP3 sales.
The related text can be programmed by
PGM2 MODE\SETTING\TEXT\FUNCTION TEXT
Text no. 54 ~ 74.
PGM2 MODE\SETTING\TEXT\FUNCTION TEXT
Text no. 54 ~ 74.
Page 27 - 39
40.
Hourly report / Customer counting.
Previously the customer counter was counted up if a GLU with already registered item was
opened and closed again (without new item registrations). At this version the customer counter
only counts up when real registration (registration of articles) are made. Please refer to the
hourly report.
opened and closed again (without new item registrations). At this version the customer counter
only counts up when real registration (registration of articles) are made. Please refer to the
hourly report.
41.
Clerk TimeOut or Break not possible by existing open receipt.
A Clerk TimeOut or a WorkingTime-Break is neither possible if the clerk is still signed on at
another machine nor if he has a remaining overlapped clerk registration.
another machine nor if he has a remaining overlapped clerk registration.
42.
GC COPY and RECEIPT SHIFT with overlapped clerk function.
In previous versions, it was not possible to use GC-Copy or RCPT-SHIFT if overlapped clerk
system has been enabled. Because overlapped clerk system must be enabled for Orderman
system and in addition, GC-COPY and RCPT-SHIFT must be available, a software change has
been done. In this version, both functions becomes available even overlapped clerk system has
been enabled.
Remark: In case GC-COPY or RCPT-SHIFT is activated for a registration, a clerk change during
transaction is prohibited and an Orderman registration can not be carried out. The hand held
continuously tries to transfer the registration to the ECR. After finalizing the GC-COPY or RCPT-
SHIFT transaction, the ECR is free again and the hand held registration can be transferred.
system has been enabled. Because overlapped clerk system must be enabled for Orderman
system and in addition, GC-COPY and RCPT-SHIFT must be available, a software change has
been done. In this version, both functions becomes available even overlapped clerk system has
been enabled.
Remark: In case GC-COPY or RCPT-SHIFT is activated for a registration, a clerk change during
transaction is prohibited and an Orderman registration can not be carried out. The hand held
continuously tries to transfer the registration to the ECR. After finalizing the GC-COPY or RCPT-
SHIFT transaction, the ECR is free again and the hand held registration can be transferred.
43.
VAT Shift toggle function.
By introducing a new service parameter, SRV #921C +4, the VAT Shift toggle function becomes
available. If the toggle function is enabled, VAT Shift can be used as often as required in the
transaction. If VAT Shift is activated once, it only will return by pressing VAT Shift key again.
VAT Shift toggle function can be used only, if the VAT Shift operation timing is set to “at the
start of the transaction”.
available. If the toggle function is enabled, VAT Shift can be used as often as required in the
transaction. If VAT Shift is activated once, it only will return by pressing VAT Shift key again.
VAT Shift toggle function can be used only, if the VAT Shift operation timing is set to “at the
start of the transaction”.
VAT shift toggle
allowed
allowed
VAT shift
operation timing
operation timing
The action after printing
Bill
Bill
921-C
Default
The item data is deleted
and each bill continues to
print in the previous bill.
and each bill continues to
print in the previous bill.
0
Only at the start of
transaction.
transaction.
The item data is not
deleted and each bill
prints all item.
deleted and each bill
prints all item.
1
√
The item data is deleted
and each bill continues to
print in the previous bill.
and each bill continues to
print in the previous bill.
2
No
Only at the end of
transaction.
transaction.
The item data is not
deleted and each bill
prints all item.
deleted and each bill
prints all item.
3
The item data is deleted
and each bill continues to
print in the previous bill.
and each bill continues to
print in the previous bill.
4
Yes
Only at the start of
transaction.
transaction.
The item data is not
deleted and each bill
prints all item.
deleted and each bill
prints all item.
5
Page 28 - 39
44.
Group Discount for PLU from DEPARTMENT preset.
To make the maintenance of group discount setting for PLU more comfortable, a new
parameter has been introduced. If the group discount setting for the PLU is set to “NO” but the
parameter “GDSC DEPT LOOKUP” in PGM2 MODE\SETTING\OPTIONAL\FUNCTION
SELECT2\ is set to “YES”, the group discount setting of the assigned department becomes
valid.
parameter has been introduced. If the group discount setting for the PLU is set to “NO” but the
parameter “GDSC DEPT LOOKUP” in PGM2 MODE\SETTING\OPTIONAL\FUNCTION
SELECT2\ is set to “YES”, the group discount setting of the assigned department becomes
valid.
45.
Auto key for service mode.
With this version, it is possible to enter and also to leave the service mode by auto keys.
Remark: In the auto key sequence programming, the function key which will be found in
“PGM&X/Z – 641 Exit” has to be used for leaving the service mode window.
Remark: In the auto key sequence programming, the function key which will be found in
“PGM&X/Z – 641 Exit” has to be used for leaving the service mode window.
46.
Sign on buttons in MODE screen.
In case of clerk real key mode, everybody could enter the MODE menu and sign on via the
CLK# key as another clerk. To make the ECR more secure, all sign on keys, except the MGR#
key, are hided and not visible on the MODE screen anymore.
CLK# key as another clerk. To make the ECR more secure, all sign on keys, except the MGR#
key, are hided and not visible on the MODE screen anymore.
47.
Print position of separator line on bill and receipt.
Due to the separator line was printed directly after the item every time, the separator line was
printed at a wrong position in case of ITEM(%) or ITEM(-) discount has been granted. Now, if
ITEM(%) or ITEM(-) discount has been given, the separator line will be printed under the
discount line. By doing this, it is easy to see to which article the discount is belonging. E.g.
printed at a wrong position in case of ITEM(%) or ITEM(-) discount has been granted. Now, if
ITEM(%) or ITEM(-) discount has been given, the separator line will be printed under the
discount line. By doing this, it is easy to see to which article the discount is belonging. E.g.
Click on the first or last page to see other UP-3500 (serv.man25) service manuals if exist.