DOWNLOAD Sharp ER-A160 / ER-A180 Service Manual ↓ Size: 1.36 MB | Pages: 48 in PDF or view online for FREE

When power is lost, the machine retains its memory contents and all information on sales entries.
The following situations occur during a power failure or paper jam. (Batteries must be correctly installed.)

When a power failure occurs when the register is turned on or during a computation process:
When power returns, the register resumes operation from the point of failure.

When a power failure occurs during the printing of a sales transaction or of X/Z
reports:
When power returns, the register prints “

” and then resumes correct

printing of the transaction or reports.

What to do when the printer motor locks:
If the printer motor happens to lock, the printing stalls, and an intermittent beeping
starts.  If this occurs, please follow the procedure below.

Turn the mode switch to “

” position.

Insure the printer is clear of any obstructions (e.g. paper jams, etc).
To clear the printer, remove the printer cover and the ribbon cover. 

Turn the mode switch to the previous position.  The “----------” appears in the display.

Feed the paper roll to the proper position.

Press the 

c

key.

The register will resume correct printing after printing “

”. 

If your register is locked, perform the program resetting.  When the program resetting is performed, the register
returns to the initial state without erasing the sales data and user-programmed settings.  The procedure is as
follows:

Unplug the power code from the outlet.

Turn the mode switch to “PGM” position.

While pressing the 

á

key, plug the power code to the outlet.

When the program resetting is done successfully, “

2” is printed.

The malfunctions shown in the left-hand column below, labelled “Fault,” do not necessarily indicate functional
faults of the machine.  It is therefore advisable to refer to the “Checking” shown in the right-hand column before
calling for service.

Fault

Checking

The display won't be illuminated even when 
the mode switch is turned to any other 
position than “    ”.

• Is power supplied to the electrical outlet?
• Is the power cord plug out or loosely connected to the 
  electrical outlet?

(2) 

The display shows symbols that do not make sense.

• Was the machine initialized?

(1) 

The display is illuminated, but the whole machine 
refuses registrations.

• Is a cashier code assigned to the register?
• Is the mode switch set properly at the “REG” position?

(3) 

No receipt is issued.

• Is the paper roll properly installed?
• Is there a paper jam?
• Is the receipt function in the “OFF” status?

(4) 

No journal paper is taken up.

• Is the take-up spool installed on the bearing properly? 
• Is there a paper jam?

(5) 

Printing is unusual.

• Is the paper roll properly installed?
• Is the ink ribbon worn out?
• Is the ink ribbon installed properly?
• Has the ink ribbon folded?

(6) 

10

9

8

For your register, the following options are available.  For details, contact your dealer.
•Key kit models

By using the following key kits, you can change the keyboard layout of your register.
• ER-11KT7: 30  regular size keys

• ER-12KT7: 30  1 x 2 size keys

• ER-22KT7: 10  2 x 2 size keys

• ER-11DK7G: 30  regular size dummy keys

• ER-51DK7G: 10  5 x 1 size dummy keys

Model:

ER-A160/ER-A180

Dimensions:

ER-A160: 330 (W) x 364 (D) x 238 (H) mm

ER-A180: 355 (W) x 424 (D) x 252 (H) mm

Weight:

ER-A160: 8.7 kg

ER-A180: 10.7 kg

Power source:

Official (nominal) voltage and frequency

Power consumption:

Stand-by 8W

Operating 17W (max.)

Working temperature:

0 °C to 40 °C

Electronics:

LSI (CPU) etc.

Display:

Operator display:

7-segment display (10 positions)

Customer display:

7-segment display (7 positions)

Printer:

Type:

One-station print wheel selective type

Printing speed:

Approx. 3.2 lines/second

Printing capacity:

12 digits

Other functions:

Receipt (ON-OFF) function

Paper roll:

Width: 57.5 ± 0.5 mm

Max. diam.: 70 mm

Weight: 52.3 to 64 g/m

2

Superior quality paper

Thickness: 0.06 to 0.085 mm

Ink ribbon:

Width: 13 mm   Length: 4 m   Colour: Purple (single colour)

Cash drawer:

ER-A160: 3 slots for bill and 7 for coin denominations

ER-A180: 5 slots for bill and 8 for coin denominations

Accessories:

Manager key

2

Operator key

2

Drawer lock key

2

Paper roll

1

Take-up spool

1

Ink ribbon

1 (mounted on the printer)

Battery caution label

1

Fixing angle bracket

1

Instruction manual

1 copy

Bill separator

1 (ER-A160 only) (set in the drawer)

Logo stamp

1 (ER-A180 only) (mounted on the printer)

* Specifications and appearance subject to change without notice for improvement.

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured 

markings identifying the terminals in your plug, proceed as follows. 

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 

N or coloured black. 

The wire which is coloured BROWN must be connected to the terminal which is marked with the 

letter L or coloured red. 

The apparatus must be protected by a 3A fuse in the mains plug or distribution board.

CAUTION: DO NOT CONNECT THE LIVE (BROWN) WIRE OR THE NEUTRAL (BLUE) WIRE 

TO THE EARTH TERMINAL OF YOUR 3-PIN MAINS PLUG.

Environment Protection
The device is supported by a battery. To dispose the battery safely to protect the environment, 
please note the following points:
•  Take the used battery to your local waste depot, dealer or customer service centre for recycling.
•  Do not throw the used battery into fire, into water or into the household waste!

Umweltschutz
Das Gerät wird durch eine Batterie gestützt.  Um die Batterie sicher und umweltschonend zu 
entsorgen, beachten Sie bitte folgende Punkte:
•  Bringen Sie die leere Batterie zu Ihrer örtlichen Mülldeponie, zum Händler oder zum 
   Kundenservice-Zentrum zur Entsorgung.
•  Werfen Sie die leere Batterie niemals ins Feuer, ins Wasser oder in den Hausmüll.

Protection de l’environnement
L’appareil est supporté sur pile.  Afin de protéger l’environnement, nous vous recommendons de 
traiter la pile usagée la façon suivante:
•  Apporter la pile usagée à votre centre de traitement des ordures ménagères le plus proche ou, 
   à votre revendeur ou, au service après-vente, pour recyclement.
•  Ne jamais jeter la pile usagée dans une source de chaleur, dans l’eau ou dans les vide-ordures.

Miijöskydd
Denna produkt nöddrivs av batteri.
Vid batteribyte skall följande iakttagas:

•  Det förbrukade batteriet skall inlämnas till er lokala handlare eller till kommunal miljöstation för 
   återinssamling.
•  Kasta ej batteriet i vattnet eller i hushållssoporna.  Batteriet får ej heller utsätttas för öppen eld.

The wires in this mains lead are coloured in accordance with the following code:

Geräuschpegel: 56 dB (A)
Gemessen nach DIN 45635 bzw. EN27779
(Spitzenwert bei Aufspringen der Kassenschublade: 70 dB (A))

Geräuschpegel: 57 dB (A)
Gemessen nach DIN 45635 bzw. EN27779
(Spitzenwert bei Aufspringen der Kassenschublade: 67 dB (A))

Printed in Korea / Imprimé en Corée / Gedruckt in Korea / Impreso en Corea

T(TINSM2406BHZZ) 

➀