Sharp BD-HP20H (serv.man2) User Manual / Operation Manual ▷ View online
39
Settings
q
SETTINGS
SPEAKER SETTINGS
About speakers
You can use your speakers with this Player through an
amplifi er. You can set the speaker size, distance from the
viewer, and output level for each speaker.
amplifi er. You can set the speaker size, distance from the
viewer, and output level for each speaker.
Using multi channel speakers
Using 2 channel speakers
Subwoofer (SW)
Front speaker (L)
Front speaker (R)
Centre speaker (C)
Surround speaker (LS)
Surround speaker (RS)
Speaker (L)
Speaker (R)
NOTE
• Refer to the operation manual for the speakers or amplifi er for
details of speaker setup.
• Speaker setting cannot be performed with the disc in the disc tray.
Take out the disc from the player before setup.
Take out the disc from the player before setup.
Basic Operation for SPEAKER
SETTINGS
SETTINGS
Press SETUP to display the SETUP MENU
screen.
screen.
Press
a/b/c/d to select “SETTINGS”, then
press ENTER.
1
2
DISPLAYS THE TITLE LIST
SETTINGS
ON SCREEN LANGUAGE
Press
a/b to select “SPEAKER SETTINGS”,
then press ENTER.
3
AUDIO VIDEO SETTINGS
SPEAKER SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY / LED
VERSION
SOFTWARE UPDATE
SYSTEM RESET
MENU [SPEAKER SETTINGS]
Press
c/d to select the desired item, then
press ENTER.
4
YES
NO
MENU [SPEAKER SETTINGS]
40
SETTINGS
Speakers
Selectable size
L/R
LARGE*, SMALL
C/RS/LS
LARGE*, SMALL, NONE
SW
YES*, NO
* Factory preset
LARGE: The cone diameter is 16 cm or larger.
SMALL: The cone diameter is smaller than 16 cm.
SMALL: The cone diameter is smaller than 16 cm.
Selectable Distance
range
range
0.1m through 9.0m
(Settings available in 0.1m increments)
(Settings available in 0.1m increments)
The factory preset value: 3.8m(L/R/C)
2.0m(RS/LS)
2.0m(RS/LS)
Selectable Output
Level range
Level range
-6dB through +6dB
(Settings available in 1dB increments)
(Settings available in 1dB increments)
The factory preset value is 0dB.
0dB
SW
SW
3.8m/0dB
L
L
LS
2.0m/0dB
RS
2.0m/0dB
3.8m/0dB
C
3.8m/0dB
R
MENU [SPEAKER SETTINGS]
TEST START
FINISH
Press
c/d to select the preferred item, then
press
a/b to select the preferred setting, then
press ENTER.
6
0dB
SW
SW
3.8m/0dB
L
L
LS
2.0m/0dB
RS
2.0m/0dB
3.8m/0dB
C
3.8m/0dB
R
MENU [SPEAKER SETTINGS]
LARGE
3.8 m
0dB
SIZE DISTANCE LEVEL
Repeat steps 5 and 6 until each speaker's size,
distance, and level are set.
distance, and level are set.
7
NOTE
• The speakers L and R, LS and RS move relative to one another.
• The speakers L and R are automatically set to “LARGE” when the
• The speakers L and R are automatically set to “LARGE” when the
subwoofer SW is set to “NO”, even after speakers L and/or R are
set to “SMALL”.
set to “SMALL”.
• The images of speakers set to “NONE” disappear or are greyed
out on the screen.
• As for a subwoofer, there are no settings for distance.
Press
a/b/c/d to select the speaker, then
press ENTER.
5
0dB
SW
SW
3.8m/0dB
L
L
LS
2.0m/0dB
RS
2.0m/0dB
3.8m/0dB
C
3.8m/0dB
R
MENU [SPEAKER SETTINGS]
TEST START
FINISH
Checking the setup sound
Press
a/b/c/d to select “TEST START”, then
press ENTER.
8
0dB
SW
SW
3.8m/0dB
L
L
LS
2.0m/0dB
RS
2.0m/0dB
3.8m/0dB
C
3.8m/0dB
R
MENU [SPEAKER SETTINGS]
TEST START
FINISH
• After switching to TEST mode, you can hear the Test
sound from each speaker in turn.
• If you press
a/b/c/d to select the preferred
speaker while the TEST sound is present, you
can hear the TEST sound of the speaker that you
selected.
can hear the TEST sound of the speaker that you
selected.
• If you press
a/b/c/d to select “TEST TONE
STOP” and press ENTER, you can stop the Test
sound
sound
41
Settings
q
SETTINGS
0dB
SW
SW
3.8m/0dB
L
L
LS
2.0m/0dB
RS
2.0m/0dB
3.8m/0dB
C
3.8m/0dB
R
MENU [SPEAKER SETTINGS]
TEST START
FINISH
Completing the settings
12
Press
a/b/c/d to select “FINISH”, then press
ENTER.
Resetting the setup
• When the sound volume of each speaker is uneven, reset
the settings separately.
• As for a subwoofer, you can adjust LEVEL only.
Press ENTER while the TEST sound is present
from the speaker that you want to reset the
setting.
from the speaker that you want to reset the
setting.
10
Press c/d to select the “LEVEL”, then press
a/b to select the preferred setting, then press
ENTER.
ENTER.
11
Repeat steps 9 and 10 until each speaker is
reset.
9
13
Press SETUP or EXIT to exit.
42
QUICK START
• This turns the QUICK START function on and off.
• When the QUICK START function is on, the startup time of the player is reduced when resuming playback
• When the QUICK START function is on, the startup time of the player is reduced when resuming playback
from standby.
• However, power consumption will increase.
AUDIO VIDEO SETTINGS
SPEAKER SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY / LED
VERSION
SOFTWARE UPDATE
SYSTEM RESET
MENU [QUICK START]
YES, NO
AUTO POWER OFF
•
This sets the Player so that power is automatically shut off if playback is stopped for about 10 minutes.
AUDIO VIDEO SETTINGS
SPEAKER SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY / LED
VERSION
SOFTWARE UPDATE
SYSTEM RESET
MENU [AUTO POWER OFF]
YES, NO
AQUOS LINK
• This lets you set the Player to receive the control signal from the AQUOS LINK remote control via the HDMI
cable.
AUDIO VIDEO SETTINGS
SPEAKER SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY / LED
VERSION
SOFTWARE UPDATE
SYSTEM RESET
MENU [AQUOS LINK]
• For details, refer to the operation manual of TV.
YES, NO
SETTINGS
MENU [QUICK START]
YES
NO
MENU [AUTO POWER OFF]
YES
NO
MENU [AQUOS LINK]
YES
NO
Click on the first or last page to see other BD-HP20H (serv.man2) service manuals if exist.