DOWNLOAD Sharp BD-HP20H (serv.man2) Service Manual ↓ Size: 8.47 MB | Pages: 56 in PDF or view online for FREE

q

•  This sets the resolution of the HDMI video output.

AUDIO VIDEO SETTINGS

SPEAKER SETTINGS

QUICK START

AUTO POWER OFF

AQUOS LINK

PLAYBACK SETTING

FRONT DISPLAY / LED

VERSION

SOFTWARE UPDATE

SYSTEM RESET

MENU    [AUDIO VIDEO SETTINGS]

 HDMI output and Component output can not be used at the same time.

•  When the BD player is connected to a 1080p 24Hz compatible TV and the HDMI VIDEO OUT is set to AUTO, 1080p 

24Hz will automatically be displayed when compatible discs are played back.

AUTO, 
1080p, 
1080i, 720p, 
576/480p

•  This sets the Player automatically to change the video output to HDMI when detecting an HDMI signal.

AUDIO VIDEO SETTINGS

SPEAKER SETTINGS

QUICK START

AUTO POWER OFF

AQUOS LINK

PLAYBACK SETTING

FRONT DISPLAY / LED

VERSION

SOFTWARE UPDATE

SYSTEM RESET

MENU    [AUDIO VIDEO SETTINGS]

YES, NO

•  You can set AUDIO OUT when connecting to SURROUND equipment.
1. This sets the audio output connected to SURROUND equipment.

5.1 ch AUDIO OUTPUT

OPTICAL / COAXIAL DIGITAL OUTPUT

HDMI OUTPUT

2ch AUDIO OUTPUT

TV ASPECT RATIO
TV TYPE

HDMI VIDEO OUT
HDMI AUTO DETECTION

COMPONENT VIDEO OUT

AUDIO OUT

DYNAMIC RANGE CONTROL

MENU    [AUDIO VIDEO SETTINGS -  AUDIO OUT]

HDMI OUTPUT

Select this when you connect using HDMI OUT terminal.

OPTICAL/COAXIAL DIGITAL OUTPUT

Select this when you connect using DIGITAL AUDIO OUT terminal 
(COAXIAL or OPTICAL).

5.1ch AUDIO OUTPUT

Select this when you connect using 5.1CH AUDIO OUT jacks.

2ch AUDIO OUTPUT

Select this when you do not use SURROUND equipment.

HDMI 
OUTPUT

OPTICAL/
COAXIAL 
DIGITAL 
OUTPUT

5.1ch AUDIO 
OUTPUT

2ch AUDIO 
OUTPUT

1080p

AUTO

1080i

720p

576/480p

TV ASPECT RATIO
TV TYPE

HDMI VIDEO OUT

HDMI AUTO DETECTION

COMPONENT VIDEO OUT

AUDIO OUT
DYNAMIC RANGE CONTROL

MENU    [AUDIO VIDEO SETTINGS -  HDMI VIDEO OUT]

YES

NO

TV ASPECT RATIO
TV TYPE

HDMI VIDEO OUT

HDMI AUTO DETECTION

COMPONENT VIDEO OUT

AUDIO OUT
DYNAMIC RANGE CONTROL

MENU    [AUDIO VIDEO SETTINGS -  HDMI AUTO DETECTION]

1  This sets the audio output mode for HDMI OUT terminal when selecting HDMI OUTPUT.

PCM (SURROUND)

AUTO

TV ASPECT RATIO
TV TYPE

HDMI VIDEO OUT
HDMI AUTO DETECTION

COMPONENT VIDEO OUT

AUDIO OUT

DYNAMIC RANGE CONTROL

MENU    [AUDIO VIDEO SETTINGS -  AUDIO OUT]

AUTO

•  Select this when connecting to HDMI equipment with a built-in decoder 

for DOLBY DIGITAL, etc.

•  Setting to AUTO will output in an audio output mode best suited to the 

connected equipment.

PCM (SURROUND)

•  Select this when connecting to multi-channel HDMI equipment.
•  Setting to PCM (SURROUND) will output by LINEAR PCM by decoding 

audio signals recorded in each audio output mode such as DOLBY 
DIGITAL, DTS.

AUTO

PCM

(SURROUND)

2  This sets the audio output mode for DIGITAL AUDIO OUT (COAXIAL jack / OPTICAL terminal) when selecting 

BITSTREM 

PCM (STEREO) 

BITSTREM 

DOLBY DIGITAL 

DTS 

PCM (STEREO) 

CONFIRM

 

TV ASPECT RATIO 
TV TYPE 
COMPONENT VIDEO OUT 
HDMI VIDEO OUT 
HDMI AUTO DETECTION 

AUDIO OUT 

DYNAMIC RANGE CONTROL 

MENU    [AUDIO VIDEO SETTINGS -  AUDIO OUT]

DOLBY DIGITAL

DTS

BITSTREAM

•  Select this when connecting to SURROUND 

equipment with a built-in decoder for DOLBY DIGITAL, 
DTS.

•  Setting to BITSTREAM will output each audio signal 

by BITSTREAM.

PCM (STEREO)

•  Select this when connecting to 2 channel stereo audio 

equipment. 

•  Setting to PCM (STEREO) will output by converting 

each audio signal into PCM 2channel audio signal.

DOLBY     

DIGITAL

DTS

BITSTREAM
PCM 
(STEREO)

•  MPEG Audio is only output as PCM (STEREO) 48 

KHz.

q

•  This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. 

Use this when it is hard to hear dialogue.

AUDIO VIDEO SETTINGS

SPEAKER SETTINGS

QUICK START

AUTO POWER OFF

AQUOS LINK

PLAYBACK SETTING

FRONT DISPLAY / LED

VERSION

SOFTWARE UPDATE

SYSTEM RESET

MENU    [AUDIO VIDEO SETTINGS]

*  Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output 

may be applied to the speakers.

NORMAL, 
SHIFT

NORMAL

SHIFT

TV ASPECT RATIO
TV TYPE
COMPONENT VIDEO OUT
HDMI VIDEO OUT
HDMI AUTO DETECTION
AUDIO OUT

DYNAMIC RANGE CONTROL

MENU    [AUDIO VIDEO SETTINGS -  DYNAMIC RANGE CONTROL]

NORMAL*: The same 
audio as the recorded 
audio is output, so that 
the volume sounds the 
same as audio CD.
SHIFT: When Dolby 
Digital audio is played 
back, the dynamic 
range of the audio is 
adjusted so that the 
dialogue portion can be 
heard easily. (If the audio 
sounds abnormal, set to 
“NORMAL”.)

Setting “TV ASPECT RATIO” under “AUDIO VIDEO 

SETTING”

Press SETUP to display the SETUP MENU 
screen.

Press 

a/b/c/d to select “SETTINGS”, then 

press ENTER.

AUDIO VIDEO SETTINGS

SPEAKER SETTINGS

QUICK START

AUTO POWER OFF

AQUOS LINK

PLAYBACK SETTING

FRONT DISPLAY / LED

VERSION

SOFTWARE UPDATE

SYSTEM RESET

MENU    [AUDIO VIDEO SETTINGS]

Press 

a/b to select “TV ASPECT RATIO”, then 

press ENTER.

Press 

c/d to select the desired item, then 

press ENTER.

WIDE

16 : 9

4 : 3

NORMAL

TV ASPECT RATIO

TV TYPE

HDMI VIDEO OUT
HDMI AUTO DETECTION

COMPONENT VIDEO OUT

AUDIO OUT
DYNAMIC RANGE  CONTROL

MENU    [AUDIO VIDEO SETTINGS -  TV ASPECT RATIO]

Press 

a/b to select “AUDIO VIDEO 

SETTINGS”, then press ENTER.

Press 

c/d to select the desired format, then 

press ENTER.

LETTER BOX 

PAN SCAN 

 

TV ASPECT RATIO 

TV TYPE 
COMPONENT VIDEO OUT
HDMI VIDEO OUT
HDMI AUTO DETECTION
AUDIO OUT 
DYNAMIC RANGE CONTROL 

MENU    [AUDIO VIDEO SETTINGS -  TV ASPECT RATIO]

DISPLAYS THE TITLE LIST

SETTINGS

ON SCREEN LANGUAGE

Press SETUP or EXIT to exit.