Panasonic KX-TGP600RUB / KX-TPA60RUB Service Manual ▷ View online
33
KX-TGP600RUB/KX-TPA60RUB
8.5.
Peer to Peer Mode Test
This is for VoIP communication TEST
Setting of PC and Unit are required before communication test by Peer to Peer Mode. Refer to from Preparation (P.33) to Connec-
tion for Test (P.39).
tion for Test (P.39).
8.5.1.
Preparation
Prepared device:
• Unit (for Test phone and Reference phone): Each one
• PC for configuration (with LAN I/F, Internet Explorer version 8 or higher): One
• Straight Ethernet (LAN) cable
• PC for configuration (with LAN I/F, Internet Explorer version 8 or higher): One
• Straight Ethernet (LAN) cable
8.5.2.
PC Setting for Configuration
1. Turn on the PC.
2. Set the IP address on your PC.
2. Set the IP address on your PC.
1) Click [Control Panel], then click [Network Connections].
Test Mode 1
Test Mode 2
34
KX-TGP600RUB/KX-TPA60RUB
2) Right-click the Local Area Connection icon, then select [Properties].
3) Open the TCP/IP properties, and set each parameter as follows.
• Use the following IP address.
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
Default gateway:... (blank)
Subnet mask: 255.255.255.0
Default gateway:... (blank)
• Use the following DNS server addresses.
Preferred DNS server:... (blank)
Alternate DNS server:... (blank)
Alternate DNS server:... (blank)
4) Click [OK] button then close the Network Connection window.
5) Restart the PC if necessary.
5) Restart the PC if necessary.
192.168. 0.1
255.255.255.0
35
KX-TGP600RUB/KX-TPA60RUB
8.5.3.
SET Static IP address
menu
SYSTEM SETTING
OK
NetworkSetting
OK
Static
OK
ie 192.168.0.141
NEXT
255.255.255.0
OK
IPv4 Setting
OK
36
KX-TGP600RUB/KX-TPA60RUB
8.5.4.
How to Login to Panasonic Administrator Menu
Connections:
1. Power on the unit and set the fixed IP address.
1-1. Plug the Base Unit’s AC adaptor.
1-2. Insert battery in Handset.
1-3. Using phone user interface, confirm the following settings and write them down.
DHCP
DHCP
IP settings (IP address, Subnet mask, Default gateway, DNS1,DNS2)
These settings must be restored later.
1-4. Using phone user interface, set the parameter as follows.
DHCP
DHCP
:
Off
IP address : 192.168.0.241
Subnet mask : 255.255.255.0
2. Connect the LAN/Ethernet port on Base Unit to the LAN port on your PC for configuration with Ethernet (LAN) cable.
3. Turn on the PC.
4. Start “Internet Explorer” on your PC.
3. Turn on the PC.
4. Start “Internet Explorer” on your PC.
Login to Panasonic Administrator Menu:
1. Using phone user interface, set “Embedded web” to “On”
2. Access the following address using “Internet Explorer”.
2. Access the following address using “Internet Explorer”.
http://192.168.0.241
3. Enter your user name and password into the window and click [OK] button.
IP: 192.168.0.1
LAN
Ethernet (LAN) cable
PC
User name : maintenanceserviceid
Password : sDSEr9wi
Password : sDSEr9wi
Click on the first or last page to see other KX-TGP600RUB / KX-TPA60RUB service manuals if exist.