Panasonic KX-TGP600RUB / KX-TPA60RUB Service Manual ▷ View online
49
KX-TGP600RUB/KX-TPA60RUB
9.3.12.
Peer to peer Mode Status
1. Click [Maintenance] button of tab, and click [Peer to peer Mode] button of menu.
2. Allows you to set for Peer to peer Mode.
3. Clicking [save] button to change working mode
2. Allows you to set for Peer to peer Mode.
3. Clicking [save] button to change working mode
9.3.13.
Restart to Default Status
1. Click [Maintenance] button of tab, and click [[Restart to Default] button of menu.
2. Allows you to set for reset to Carrier default or reset to Fafctory Default .
2. Allows you to set for reset to Carrier default or reset to Fafctory Default .
After clicking this button, a dialog box is displayed to ask you whether to restart the Base Unit. Click [OK] to perform a restart,
or [Cancel] not to.
Notice:
or [Cancel] not to.
Notice:
The Base Unit will be restarted even if it is accessing the phone user interface or on calls.
Carrier reset
Factory reset
50
KX-TGP600RUB/KX-TPA60RUB
9.3.14.
Restart
1. Click [Maintenance] button of tab, and click [Restart] button of menu.
2. Allows you to restart the Base Unit by clicking [Restart]. After clicking this button, a dialog box is displayed to ask you whether
2. Allows you to restart the Base Unit by clicking [Restart]. After clicking this button, a dialog box is displayed to ask you whether
to restart the Base Unit. Click [OK] to perform a restart, or [Cancel] not to.
Notice:
Notice:
The Base Unit will be restarted even if it is accessing the phone user interface or on calls.
51
KX-TGP600RUB/KX-TPA60RUB
9.4.
How to Change MAC Address Label
(Procedure after Replacing the Main P.C.Board of Base Unit)
(Procedure after Replacing the Main P.C.Board of Base Unit)
When replacing the Main P.C.Board on the Base Unit, customer data shall be renewed before sticking the included MAC/Serial
label.
label.
9.4.1.
Replacing Main P.C.Board
Note:
(*1) : If you reuse defective P.C.Board for another repairing unit by repairing. Peel off the serial number and MAC address label
on original bottom cabinet and keep them with defective P.C.Board.
(*2) : If you do not reuse the defective P.C.Board by repairing, scrap the P.C.Board to prevent the leak of customer's information
in flash ROM.
on original bottom cabinet and keep them with defective P.C.Board.
(*2) : If you do not reuse the defective P.C.Board by repairing, scrap the P.C.Board to prevent the leak of customer's information
in flash ROM.
New MAC address
New Serial Number
Serial and MAC label
Base Unit Main P.C.Board
New
Main P.C.Board
Base Unit Main P.C.Board KIT from
service part
service part
Defective
Main P.C.Board
Defective
Main
P.C.Board
Main
P.C.Board
Defective
main
P.C.Board
main
P.C.Board
Waiting for repair
Scrap
Old MAC address
Old Serial Number
(*1)
(*2)
52
KX-TGP600RUB/KX-TPA60RUB
9.4.2.
Attaching MAC Address and Serial Number Label
Attach the new MAC address label and new Serial number label to the Base Unit by placing over the old label.
9.4.2.1.
Base Unit
Attach the new label
Attach the new label
S/N : XXXXXXXXXXX
Model: KX-XXXXXXX
NEW Serial Number Label
MAC : XXXXXXXXXXXX
NEW MAC Address Label
Click on the first or last page to see other KX-TGP600RUB / KX-TPA60RUB service manuals if exist.