DOWNLOAD Panasonic KX-TGP600RUB / KX-TPA60RUB Service Manual ↓ Size: 7.75 MB | Pages: 105 in PDF or view online for FREE

21

Amber

On

The base unit’s IP address may conflict with the IP
addresses of other devices on your local network.
Contact your administrator for further information.

Slow Flashing

The base unit is obtaining an IP address or is obtaining
configurations. Please wait.
The base unit is registering with your phone system.
Please wait
If the STATUS indicator continues flashing, check the
following:
– Network settings may not be correct. Contact your

administrator.

– Many installation issues can be resolved by resetting

all the equipment. First, shut down your modem,
router, hub, base unit, and computer. Then turn the
devices back on one at a time in this order: modem,
router, hub, base unit, computer.

– If you cannot access Internet Web pages using your

computer, check to see if your phone system is having
connection issues in your area.

– For more troubleshooting help, contact your

administrator.

Quick
Flashing

Unplug the base unit’s AC adaptor to reset the unit, then
reconnect the AC adaptor. If the STATUS indicator is still
flashing rapidly, there may be a problem with the base
unit hardware. Contact your phone system dealer/
service provider.

Slow switching
(Red

Green

Amber

Off)

The base unit is in maintenance mode. Turn the base unit
off and then back on again.

Quick switching
(Red

Green

Amber

Off)

The base unit is restarting. Wait a moment.

Off

—

The base unit power is off.
The Ethernet cable is not connected properly. Connect it.
Your network devices (hub, router, etc.) are turned off.
Check the LEDs for the link status of the devices.

The indicator flashing patterns are as follows:
– Slow Flashing: 60 times per minute
– Quick Flashing: 240 times per minute

Handset locator button
You can locate a misplaced handset/desk phone by paging it.
If you press the button again, or after 60 seconds have passed, the page to the handset/desk 
will be stopped.

22

Red

On

Charging

Slow Flashing

There is a new missed call or voice mail.

Quick Flashing

Receiving a call

Off

—

Fully charged or the handset is not connected to the charger.

The headsets can be used with this unit. (Not all operations with the headsets can be guaranteed.)
For up-to-date information about headsets that have been tested with this unit, refer to the following
web sites:
http://panasonic.net/pcc/support/sipphone

23

Used to make or answer calls, or toggle between Receiver mode and Hands-free mode during a
conversation. During a conversation using a headset, Hands-free mode does not work.
[Navigator] Key
The Navigator Key includes four arrow keys and a center key. The arrow keys are used to adjust the
ringer/receiver volume or move the cursor to select an item. The center key is used to confirm a
selection. If in standby mode, pressing the keys perform the following functions:

LEFT (

) 

 Used to display the Incoming call log.

*1

UP (

) 

 Used to adjust the ringer volume.

RIGHT (

)  

Used to open the phonebook.

*1

DOWN (

)  

Used to display the Outgoing call log.

CENTER 

 Used to display the Menu.

In this manual, when a procedure instructs you to "press 

", you can also press the

[CENTER] key to confirm the selection.

*1 When the BroadCloud (Presence) feature is enabled, the phone will operate as follows. Contact

your administrator for further information.
LEFT: Used to display Presence.
RIGHT: Used to display Favorites.

During talking, used to place a call on Hold. In standby mode, used to retrieve a call on hold if there
is one, or used to access your voice mailbox if no call is on hold.

Used to turn Silent Mode on or off when pressed for more than 2 seconds in standby mode. 

Used to confirm the line status or seize a line.
Receiver
Display
[Soft] Keys
A/B/C (located from left to right) are used to select the item displayed on the bottom line of the
display. 

Used to end calls, exit the phonebook or Function mode. Press and hold this key to turn the handset
on or off.

Used to transfer a call to another party, or to clear digits or characters.

Pressing this key followed by a keypad number (0–9) allows you to perform various common
functions quickly. 
Microphone
Charge Contacts
Strap Holes
Used to attach phone straps and similar items.
Speaker

24

Connect the AC adaptor and the Ethernet cable to the base unit.

Connect the AC adaptor to the charger.

Open the battery cover, insert the batteries, and close the cover as indicated below.

You can attach the handset to your belt by following the steps below.