DOWNLOAD Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual ↓ Size: 21.33 MB | Pages: 100 in PDF or view online for FREE

Model
PT-VZ585N PT-VW545N PT-VX615N PT-VZ580 PT-VW540 PT-VX610 (serv.man3)
Pages
100
Size
21.33 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / LCD PROJECTOR
File
pt-vz585n-pt-vw545n-pt-vx615n-pt-vz580-pt-vw540-pt.pdf
Date
PREV: Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man2) Service Manual

Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual ▷ View online

ADJ-7
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
1. 3. 4. Restore the data (after board replacing)
1. Set the projector to "Normal-Standby" mode (ON(G)/STANDBY(R) indicator is lighting in red).
2. Start up the service software with a PC.
3. Select language and click the [OK] button.
4. 1) Choose the available serial port number on your PC.
 
2) Click the [Data] button.
5. 1) Click the [Transmission] button of Micom data.
  2) Select the saved data file and the data is restored after click the [ Open(O) ] button.
  3) When the progress bar reaches the right-side end, the transmission of data is completion.
  4) Restore the Gamma data/Uniformity data in the same procedure of 1-3.
6.  After completing the writing, disconnect the AC code and connect it to turn on again and then check the color uniformity 
and gamma characteristic of the projector.
:   PT-VZ580
j
k
/ Uniformity data
PT-VZ580
AB1234567
j
k
ADJ-8
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
[S
$872
(08/$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
/
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
1. 4. Panel type setting
1. 4. 1. Preparation
Before taking this setting, confirm the type of optical block (L-Type 
or R-Type) according to the item "Optical block type check" in the 
section 1 "Service Information".
1. 4. 2. Setting procedure
1.  Enter the service mode (EXTRA OPTION) and select [PANEL 
TYPE SETTING].
2.  Change the panel type to [L] or [R] with [
] [
] buttons to match 
the optical block type which is installed on the projector.
  L: L-Type
  R: R-Type
•  Refer to the item "4.2.5. Optical block type check" in section 1 for 
checking the type of the optical block.
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
[S
$872
(08/$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
/
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
1. 5. Flicker adjustment
1.  Enter the service mode (EXTRA OPTION) and select [FLICKER 
ADJUST] and press [ENTER] button to enter the flicker adjust-
ment mode.
2.  The whole red raster pattern will displayed on the screen when 
entering the adjustment mode.
3. Adjust the flicker to be minimum with [
] [
] buttons.
4.  Change another adjustment pattern with [
p
] [
q
] buttons and 
repeat the step 3 above.
  Projector provide 3 adjustment patterns "Red", "Green" and "Blue".
5.  After finishing the adjustment, press [MENU] button to exit the 
adjustment mode.
ADJ-9
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
[S
$872
(08/$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
/
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
:+,7(%$/$1&($'-867
5('
*5((1
%/8(
1. 6. White balance adjustment
1. Input the gray scale gradation pattern.
2.  Enter the service mode (EXTRA OPTION) and select [WHITE 
BALANCE ADJUST] and press [ENTER] button to enter the white 
balance adjustment mode.
3. Select the adjustment item with [
p
] [
q
] buttons.
4.  Adjust the white balance of halftone image on the screen with [
] 
[
] buttons.
5.  After finishing the adjustment, press [MENU] button to exit the 
adjustment mode.
<Note>
The projector can store the white balance level for each picture 
mode as shown below. Adjust the white balance for each mode 
properly.
Input
Mode
Computer
Dynamic
Standard
Natural
Video
Dynamic
Standard
Cinema
--
Black board
White board
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
[S
$872
(08/$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
/
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
/1&'.015'66+0)
)8<0
'8<0'
&8<0&
,8<0,
68<06
%$<0%
)8<
&8<&
68<6
%$<%
-8<-
/1&'.015'66+0)
1. 7. Model no. setting
1.  Enter the service mode (EXTRA OPTION) and select [MODEL 
NO SETTING] and press [ENTER] button to enter the model no. 
setting mode.
2.  Select the model no. of the projector with [
p
] [
q
] buttons and 
press [ENTER] button.
3.  After finishing the setting, press [MENU] button to exit the setting 
mode.
Initial value:0
Adjustment range:-32 ～ 32
ADJ-10
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
[S
$872
(08/$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
/
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
&/2*6(1625&$/,%5$7,21
2.
&$1&(/
1. 8. Clogging sensor calibration
1. 8. 1. Preparation
This is to calibrate the clog sensor circuit.
•  This calibration should be done in the condition that the projector is 
completely assembled and place on the floor and the adjuster legs 
are set in the cabinet bottom.
• Replace the air filter with new one before starting calibration.
•  The work should be done at the location where there are no heat 
apparatus and the ventilation opening of the air-conditioner and the 
object to block the exhaust air.
1. 8. 2. Adjustment procedure
1.  Enter the service mode (EXTRA OPTION) and select [CLOG 
SENSOR CALIBRATION],and press [ENTER] button to enter the 
adjustment mode.
2. Select [OK] and press [ENTER] button to start the calibration.
  During the calibration, the projector displays white raster.
3.  After approx. 20 minutes, the calibration is complete and the white 
screen switches to normal screen.
• Do not turn off the projector during the calibration.
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
[S
$872
(08/$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
/
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
ȯȫ
ȡɕɔɏȀȫɅəɓɔɏɎɅȀȣɁɌɉɂɒɁɔɉɏɎ
1. 9. Keystone calibration
1. 9. 1. Preparation
This is to calibrate the keystone correction circuit.
•  This calibration should be done in the condition that the projector is 
completely assembled and place on the flat floor and the adjuster 
legs are set in the cabinet bottom.
1. 9. 2. Adjustment procedure
1.  Enter the service mode (EXTRA OPTION) and select [KEY-
STONE CALIBRATION].
2. Press [ENTER] button to start the calibration.
3.  When calibration is complete, the message will appear on the 
screen.
4.  Press [MENU] button to exit the adjustment mode.
Page of 100
Display

Click on the first or last page to see other PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) service manuals if exist.

RANDOM: