Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual ▷ View online
ADJ-15
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
7. After loading the firmware, a checkmark and path name to the firmware and the version will be displayed on the window.
Click [Update] button to start updating of the firmware if the all information is right .
8. Click [OK] button to start updating if the software version is right.
9. During updating, the message "Now updating....." appears and all the LED are blinking. After finishing updating, the mes-
sage "Waiting for Projector reboot..." appears and the projector sets into standby mode when turn it on again. (The LED
stops blinking.)
* Don't operate the projector
during updating.
* Never disconnect the
AC cord during updating.
* Please disconnect the AC cord then plug it, if the message "Waiting for
Projector reboot" appears or the pop-up OSD disappears and the LED
don't blink after waiting for about 1 minute .
ADJ-16
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
10. When the tool detects that the projector has rebooted, the conformation window will appear. Click the [OK] button to close
the window.
* If the version of the firmware is the same, its updating will be skipped.
11 Click the [EXIT] button to quit the application.
12. Turn the projector on and display the [EXTRA OPTION] menu. Confirm that the version of the Main CPU is updated cor-
rectly on the [SELF CHECK] item.
ADJ-17
SECTION 3 ADJUSTMENTS
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
