Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual ▷ View online
DIS-3
SECTION 2 DISASSEMBLY PROCEDURES
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
1.3. Mechanical parts location
1.4. Optical parts location
DEC dial
Top cover unit
Lamp cover
Teminal cover
Lamp unit
Bottom case
G-Polarizer
B-Polarizer
Lighting case top
Integrator lens cover
Lighting case bottom
Prism beam
splitter(PBS)
splitter(PBS)
Iris unit
Integrator
lens-out
lens-out
Integrator
lens-in
lens-in
R-Polarizer
Projection lens *
Optical block/Lens
mounter unit *
mounter unit *
Power box
Lens ring
Lens cap
Air filter unit
Filter cover
Duct assy
Lighting block
* For model PT-VZ585N and VZ580, projection lens and optical block/lens mounter unit are supplied as an assemblied one parts.
* For model PT-VW545N, VX615N, VW540 and VX610 optical block/lens mounter unit are supplied as an assemblied one parts.
DIS-4
SECTION 2 DISASSEMBLY PROCEDURES
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
2. Mechanical and Electrical Parts Disassembly
2.1. Disassembly flow chart
* Before Disassembly the projector, turn the projector off and disconnect the power plug from the wall outlet.
* To assemble, reverse the disassembly procedures.
* When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
2.10. Intake fan removal
Cable reforming
2.9. Top panel duct assy removal
2.8. Power box assy removal
2.7. Lighting assy removal
2.6. Lamp duct assy and lamp house removal
2.5.1 [NT]-P.C.Board, [WL]-P.C.Board removal*1
2.5.1 [A]-P.C.Board removal*2
2.5. [A]-P.C.Board unit removal
2.4. Top cover unit removal
2.2. Air filter cover,air filter unit removal
2.3. Lamp cover and lamp removal
Completed Product
*1 For PT-VZ585N,VW545N,VX615N
*2 For PT-VZ580,VW540,VX610
DIS-5
SECTION 2 DISASSEMBLY PROCEDURES
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
2.2. Air filter cover, air filter unit removal
1. Open the air filter cover then remove it.
2. Hold the tab of the air filter unit and pull out whole air filter unit.
2.3. Lamp cover and lamp unit removal
1. Loosen 1 screw-A and remove the lamp cover to upward.
2. Loosen 3 screws-B on the lamp unit and pull it upward off.
B
B
B
A
A
SMXAA308R0SAA
B
THEC239N
Lamp unit
Lamp cover
Air filter unit
Air filter cover
DIS-6
SECTION 2 DISASSEMBLY PROCEDURES
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
2.4. Top cover unit removal
1. Remove 15 screws-A and take the top cover unit upward off.
2. Remove 1 screw-B and take the lens ring .
A
B
XTB3+10GFN
2.5. [A]-P.C.Board unit removal
1. Remove 2 screws-A and 3 screws-B and remove [A]-P.C.Board unit.
2. Remove 1 screw-C and remove holder dial upward off.
A
XYN3+F6FJ
B
XYC3+FG10FJK
C
SFPDN308R0SV-
Top cover unit
DEC_sheet _RC
DEC dial
Lens ring
[A]-P.C.Board unit
[R]-P.C.Board unit
A
Holder dial
A
C
B
B
B
Note on FFC cable mounting or dismount-
ing (For PT-VZ585N, VZ580)
To mount the Flexible Flat Cable (FFC cable)
of LCD panel to the connector on the board,
a special inserting jig must be used. If not
used, there is a possibility of cable incom-
plete mounting or break of cable.
For further instruction of mounting and dis-
mounting, refer to the item [4. 2. 6. Mounting
and dismounting the FFC cable of LCD
panel].
Click on the first or last page to see other PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) service manuals if exist.