Panasonic PT-RQ22KEJ (serv.man3) Service Manual ▷ View online
7
PREFACE
< RQ22K >
2. Specifications
2. 1 Specifications
•
The specifications of the projector are as follows.
Power supply
100 V - 120 V / 200 V - 240 V ~ (100 V - 120 V / 200 V - 240 V alternating current), 50 Hz/60 Hz
Power consumption
960 W (9.8 A)/1 650 W (8.5 A)
Power consumption (during
standby)
When [STANDBY MODE] is set to [ECO]: 0.3 W
When [STANDBY MODE] is set to [NORMAL]: 4 W
When [STANDBY MODE] is set to [NORMAL]: 4 W
DLP chip
Size
22.9 mm (0.90") (aspect ratio 16:10)
Display system
DLP chip x 3, DLP projection system
Number of pixels 4 096 000 pixels (2 560 x 1 600 dots)
Lens
Optional
Light source
Laser x 2
Light output
20 000 lm
*1*3
, 21 000 lm (center)
*2*3
(When [OPERATING MODE] is set to [NORMAL])
Center to corner zone ratio
*1
90 %
Contrast ratio
*1
20 000:1 (when [DYNAMIC CONTRAST] is set to [3])
Projected image size
1.78 m (70") to 25.40 m (1 000")
*4
Image aspect ratio
16:10
Projection method
[FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]
Power cord length
3.0 m (118-1/8")
Outer case
Molded plastic
Outer color
Black
Dimensions
Width
598 mm (23-17/32") (excluding protrusions)
Height
307 mm (12-3/32") (with the feet at shortest position)
270 mm (10-5/8") (excluding the feet and protrusion)
270 mm (10-5/8") (excluding the feet and protrusion)
Depth
725 mm (28-17/32") (excluding the protrusion)
Weight
Approx. 54 k] (119 lbs.)
*5
Noise level
*1
46 dB
Operating
environment
Operating
environment
temperature
0 °C (32 °F) to 45 °C (113 °F)
*6*7
Operating
environment
humidity
10 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AA/R6/LR6 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
Weight
150 ] (5.3 ozs.) (including batteries)
Dimensions
Width: 47.5 mm (1-7/8"), Height: 181.5 mm (7-5/32"), Depth: 27.5 mm (1-3/32")
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*2 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the
ISO/IEC 21118:2012 international standards.
*3 When a projection lens other than ET-D75LE95, ET-D75LE90 is used with the power supply voltage of AC 200 V.
*4 When the Zoom Lens (Model No.: ET-D75LE8, ET-D3LET80) is used, the projected image size for the maximum projection distance will be 1.78 m
(70") to 15.24 m (600"). When the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) is used, the projected image size for the maximum
projection distance will be 3.05 m (120") to 15.24 m (600").
*5 Average value. Weight varies for each product.
*6 The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1 400 m
(4 593') and 4 200 m (13 780') above sea level.
*7 When the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE] is set to [NORMAL] or [ECO], and the operating
environment temperature exceeds the following value, the light output may be reduced to protect the projector.
f
When using the projector at an altitude lower than 2 700 m (8 858') above sea level: 35 °C (95 °F)
f
When using the projector at an altitude between 2 700 m (8 858') and 4 200 m (13 780') above sea level: 25 °C (77 °F)
Note
f
The light output will decrease to approximately 1/2 when using the projector with AC 100 V to AC 120 V.
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
8
PREFACE
< RQ22K >
2. 2 Connecting terminal/slot
<SDI IN 1> terminal
<SDI IN 2> terminal
<SDI IN 3> terminal
<SDI IN 4> terminal
Total 4 sets (BNC)
Single link SD-SDI signal
Single link SD-SDI signal
SMPTE ST 259 compliant
Single link HD-SDI signal
SMPTE ST 292 compliant
Single link 3G-SDI signal
SMPTE ST 424, 425-2 compliant
Dual link HD-SDI signal
SMPTE ST 372 compliant
<SDI IN 1> terminal: Link A signal/<SDI IN 2> terminal: Link B
signal/<SDI IN 3> terminal: Link A signal/<SDI IN 4> terminal:
Link B signal
Dual link 3G-SDI signal
SMPTE ST 425-3 compliant
<SDI IN 1> terminal: Link 1 signal/<SDI IN 2> terminal: Link 2
signal/<SDI IN 3> terminal: Link 1 signal/<SDI IN 4> terminal:
Link 2 signal
Quad link HD-SDI signal
<SDI IN 1> terminal: Link 1 signal/<SDI IN 2> terminal: Link 2
signal/<SDI IN 3> terminal: Link 3 signal/<SDI IN 4> terminal:
Link 4 signal
Quad link 3G-SDI signal
SMPTE ST 425-5 compliant
<SDI IN 1> terminal: Link 1 signal/<SDI IN 2> terminal: Link 2
signal/<SDI IN 3> terminal: Link 3 signal/<SDI IN 4> terminal:
Link 4 signal
<MULTI PROJECTOR SYNC
IN> terminal
1 set (BNC)
TTL high impedance
TTL high impedance
<MULTI PROJECTOR SYNC
OUT> terminal
1 set (BNC)
TTL output: Maximum 10 mA
TTL output: Maximum 10 mA
<SERIAL IN> terminal
<SERIAL OUT> terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN> terminal
<REMOTE 1 OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal 1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink (class 2)
compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
<SLOT 1>
<SLOT 2>
Total 2 sets (blank), SLOT NX specification, for installing the Interface Board
<DC OUT 1> terminal
<DC OUT 2> terminal
2 sets, USB connector (type A), for power supply only (DC 5 V, 2 A total for two sets)
9
PREFACE
< RQ22K >
2. 3 Compatible signal
• For details of the types of video signals that can be used with the projector, refer to operating Instructions “List of compatible signals”
SDI signal input
SD-SDI signal
HD-SDI signal
3G-SDI signal
6G-SDI signal
SD-SDI signal
HD-SDI signal
3G-SDI signal
6G-SDI signal
*1
12G-SDI signal
*1
DIGITAL LINK signal input
f
Moving image signal resolution: 480/60i
*2
, 576/50i
*2
to 4 096 x 2 160
Still image signal resolution: 640 x 400 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 297 MHz
HDMI signal input
*3
f
Moving image signal resolution: 480/60i
*2
, 576/50i
*2
to 4 096 x 2 160
Still image signal resolution: 640 x 400 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 594 MHz
DVI-D signal input
*4
f
Moving image signal resolution: 480/60i
*2
, 576/50i
*2
to 2 048 x 1 080
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f
Dot clock frequency: 25 MHz to 162 MHz
*1 This is supported when the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10) is installed in the slot.
*2 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*3 This is supported when the optional Interface Board for HDMI 2 input (Model No.: ET-MDNHM10) is installed in the slot.
*4 This is supported when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installed in the slot.
Note
f
When performing the simultaneous input of the 4K image (resolution of 3 840 x 2 160 or 4 096 x 2 160) using the Interface Board for HDMI
2 input (Model No.: ET-MDNHM10), it is necessary for the firmware version of the Interface Board for HDMI 2 input to be 2.00 or later. If the
version is earlier than 2.00, the simultaneous process is not performed even if corresponding signal is input. Consult your dealer regarding
the version update to the latest firmware.
For details on how to confirm the firmware version, refer to “How to confirm the firmware version of the Interface Board (optional)”
f
To use the 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G), it is necessary for the firmware version of the 3G-SDI Terminal
Board with Audio to be 2.00 or later. Consult your dealer regarding the version update to the latest firmware if the version is earlier than
2.00.
For details on how to confirm the firmware version, refer to “How to confirm the firmware version of the Interface Board (optional)”
10
PREFACE
< RQ22K >
2. 4. Dimensions
Unit: mm
258 (10-5/32")
299 (11-25/32")
598 (23-17/32")
644 (25-11/32")
516 (20-5/16")
142 (5-19/32")
131 (5-5/32")
48 (1-7/8")
270 (10-5/8")
307 (12-3/32")
20 (25/32")
725 (28-17/32")
* Actual dimensions may differ depending on the product.
Click on the first or last page to see other PT-RQ22KEJ (serv.man3) service manuals if exist.