Panasonic PT-RQ22KEJ (serv.man3) Service Manual ▷ View online
INF-19
SECTION 1 SERVICE INFORMATION
< RQ22K >
(5) [SHUTTER COUNTER] is added in sub menu [INITIALIZE].
• Initialize the count if replaced the mechanical shutter.
Refer to the chapter SECTION 3 (Adjustments) for the procedure.
(6) The following items are added to the sub menu [STATUS].
1) Page 2
• The sensor value is added.
- VERTICAL TILT
Vertical angle value
- HORIZONTAL TILT
Horizontal angle value
- P.SENSOR
Luminance sensor value
2) Page 5
• Displays the FPGA/CPLD firmware version of the Interface Board
installed in each SLOT.
- FPGA VERSION
FPGA firmware version
- CPLD VERSION
CPLD firmware version
INITIALIZE
ALL USER DATA
NETWORK/E-MAIL
REGISTERED SIGNAL
LOGO IMAGE
UNIFORMITY
UNIFORMITY
SHUTTER COUNTER
MENU SELECT
EXECUTE
ENTER
INF-20
SECTION 1 SERVICE INFORMATION
< RQ22K >
3) Page 7
• Payload information of SDI data communication is displayed.
(If information can not be displayed, "---")
- MODE
Mode ([NO SIGNAL], [SD-SDI], [HD-SDI], [3G-SDI])
- TRANSPORT Conversion method ([PROGRESSIVE], [INTER-
LACED])
- PICTURE
Picture information ([PROGRESSIVE], [INTER-
LACED])
- RATE
Rate information ([23.98], [24.00], [25.00], [29.97],
[30.00], [48.00], [50.00], [59.94], [60.00])
- SAMPLING
Sampling information
([4:2:2 (YPBPR)], [4:2:2 (YCBCR)], [4:4:4 (YPBPR)],
[4:4:4 (YCBCR)], 4:4:4 (RGB)], [4:4:4:4 (YPBPR+A)],
[4:4:4:4 (RGB+A)])
- BIT DEPTH
Bit depth ([8bit], [10bit], [12bit])
4) Page 8
• Firmware version displays of each device is added.
- DIGITAL LINK VERSION
Digital LINK firmware
- FPGA VERSION
FPGA firmware [2/3-1/3-2/4/5/6]
- CPLD VERSION
CPLD firmware [1/2/3/4]
- FM R VERSION
Formatter [R] firmware (Master/Slave)
- FM G VERSION
Formatter [G] firmware (Master/Slave)
- FM B VERSION
Formatter [B] firmware (Master/Slave)
- LD DRIVER VERSION
LD Driver firmware[LD1/LD2]
- LD SUB VERSION
LD Sub Driver firmware [LD1/LD2]
- FRC VERSION
FRC firmware
- VCM VERSION
VCM microprocessor firmware
- POWER VERSION
Power microprocessor firmware
5) Page 9
• Firmware version displays of each device is added.
- MAIN VERSION
Main firmware
- FPGA VERSION
FPGA firmware [2/3-1/3-2/4/5/6]
- BMP VER.
Bitmap data
- ENG VER. ~ JPN VER.
Version of the each font data (English/
Russian/Korean/Chinese/Japanese)
FPGA No. PCB
Ref No.
FPGA1 SLOT
I/F BOARD
FPGA2
A
IC2601
FPGA3-1 DG
IC4505
FPGA3-2 DG
IC4201
FPGA4
DF
IC5001
FPGA5
DP
IC7025/IC7077
FPGA6
G
IC6522
CPLD No. PCB
Ref No.
CPLD1
A
IC2412
CPLD2
DG
IC4401
CPLD3
DF
IC5201
CPLD4
DP
IC7001
INF-21
SECTION 1 SERVICE INFORMATION
< RQ22K >
6) Page 10
• The values (degrees Celsius) of each temperature sensor are displayed.
- TEMP (IN)
Intake air temperature sensor
- TEMP (OUT)
Exhaust air temperature sensor
- TEMP (OPT)
DMD temperature sensor
- TEMP (LD1)
LD1 temperature sensor
- TEMP (LD2)
LD2 temperature sensor
- TEMP (FPGA1A/1B) FPGA1A/FPGA1B internal temperature
- TEMP (FPGA2)
FPGA2 internal temperature
- TEMP (FPGA3-1/3-2) FPGA3-1/3-2 internal temperature
- TEMP (FPGA4)
FPGA4 internal temperature
- TEMP (FPGA5A/5B) FPGA5 internal temperature
7) Page 11 - 12
• Various types of cooling control information are displayed.
- FAN
Fan rotation mode [TYPE A - TYPE J]
- ALT
Altitude mode [ALT1 - ALT5]
- ATM
Air pressure [hPa]
- RADIATOR1
Status of RADIATOR 1 fan [rpm]
- RADIATOR2
Status of RADIATOR 2 fan [rpm]
- RADIATOR3
Status of RADIATOR 3 fan [rpm]
- RADIATOR4
Status of RADIATOR 4 fan [rpm]
- RADIATOR5
Status of RADIATOR 5 fan [rpm]
- RADIATOR6
Status of RADIATOR 6 fan [rpm]
- EXHAUST1
Status of EXHAUST 1 fan [rpm]
- EXHAUST2
Status of EXHAUST 2 fan [rpm]
- DMD1
Status of DMD INTAKE 1 fan [rpm]
- DMD2
Status of DMD INTAKE 2 fan [rpm]
- HEATPIPE
Status of HEATPIPE fan [rpm]
- CIR1
Status of CIRCULATION 1 fan [rpm]
- CIR2
Status of CIRCULATION 2 fan [rpm]
- C-PRISM1
Status of COLOR PRISM 1 fan [rpm]
- C-PRISM2
Status of COLOR PRISM 2 fan [rpm]
- C-PRISM3
Status of COLOR PRISM 3 fan [rpm]
- C-PRISM4
Status of COLOR PRISM 4 fan [rpm]
- C-INTAKE1
Status of CIRCUIT INTAKE 1 fan [rpm]
- C-INTAKE2
Status of CIRCUIT INTAKE 2 fan [rpm]
- LD DRIVER
Status of LD DRIVER fan [rpm]
- PUMP-R
Status of Liquid cooling pump R [rpm]
- PUMP-G
Status of Liquid cooling pump G [rpm]
- PUMP-B
Status of Liquid cooling pump B [rpm]
- PUMP1
Status of Liquid cooling pump LD1 [rpm]
- PUMP2
Status of Liquid cooling pump LD2 [rpm]
INF-22
SECTION 1 SERVICE INFORMATION
< RQ22K >
6. [TEST PATTERN] menu
• The following test patterns are added.
8) Pages 13 - 14
• The LD unit information of each light source is displayed.
- LD1 INFO
Each LD unit of the light source 1 [On count
] / [Runtime] / [Status*]
- LD2 INFO
Each LD unit of the light source 2 [On count] / [Runtime] / [Status*]
* Status (0 : Off/ 1: On /* : Intentional Off)
9) Pages 15 - 16
• The ON / OFF history of each light source is displayed.
- Focus (background 70% gray) pattern
- Checker pattern
- Inverted checker pattern
Click on the first or last page to see other PT-RQ22KEJ (serv.man3) service manuals if exist.