Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual ▷ View online
INF-17
SECTION 1 SERVICE INFORMATION
< RCQ10 / RCQ80 >
3. 3. 2. Additional function of each menu
1. [PICTURE] menu
(1) [CCA] is added to the sub menu [PICTURE MODE].
• Set the color correction circuit operation.
- ON : Enable the color correction function. (Default setting)
- OFF : Disable.
(2) [AI WINDOW] is added to the [USER] setting in sub menu [DYNAMIC CONTRAST].
• Sets up the APL detective area. (AUTO/MANUAL, further settings are available in MANUAL mode)
INF-18
SECTION 1 SERVICE INFORMATION
< RCQ10 / RCQ80 >
2. [POSITION] menu
(1) [HDMI EQUALIZER] is added to the sub menu.
• When noise contamination to HDMI input caused by long cable or external device, set this item so that the noise de-
creases. (AUTO / 0 - 15)
(2) [DVI EQUALIZER] is added to the sub menu.
• When noise contamination to DVI-D input caused by long cable or external device, set this item so that the noise de-
creases. (AUTO / 0 - 15)
* When the interface board is installed, the menu will be expanded for the slot.
INF-19
SECTION 1 SERVICE INFORMATION
< RCQ10 / RCQ80 >
3. [PROJECTOR SETUP] menu
(1) The following two items are added to the sub-menu.
1) [COOLING CONDITION]
• Fan control can be set manually. (Usually set to [AUTO].)
2) [HIGH ALTITUDE MODE]
• Altitude can be set manually. (Usually set to [AUTO].)
(2) In the [BRIGHTNESS CONTROL STATUS] sub menu, [DETAILED INFORMATION] is displayed by pressing
the <ENTER> key.
• The detailed information of brightness control can be checked.
INF-20
SECTION 1 SERVICE INFORMATION
< RCQ10 / RCQ80 >
(4) The following items are added to the sub menu [STATUS].
1) Page 2
- VERTICAL TILT
Vertical angle
- HORIZONTAL TILT
Horizontal angle
2) Page 3
- SLOT
FPGA VERSION
FPGA version of Interface board
CPLD VERSION
CPLD version of Interface board
(3) [EMULATE] is added in sub menu [RS-232C].
• Setup when controlling this projector with other companies control command. (Default setting : OFF)
- MODE_HI
- MODE_NE
- MODE_EP
- MODE_SA
- MODE_SH
- MODE_MI
- MODE_SO
- MODE_CH
- OTHER
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.