Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual ▷ View online
9
PREFACE
< RCQ10 / RCQ80 >
2. Specifications
2. 1 Specifications
•
The specifications of the projector are as follows.
Power supply
100 V - 240 V ~ (100 V - 240 V alternating current), 50 Hz/60 Hz
Power consumption
PT-RCQ10
1 100 W (11 A - 4.5 A)
PT-RCQ80
880 W (9.0 A - 3.6 A)
Power consumption (during
standby)
When [STANDBY MODE] is set to [ECO]: Approx. 0.5 W
When [STANDBY MODE] is set to [NORMAL]: Approx. 8 W
When the [QUICK STARTUP] function is enabled: Approx. 100 W
When [STANDBY MODE] is set to [NORMAL]: Approx. 8 W
When the [QUICK STARTUP] function is enabled: Approx. 100 W
DLP chip
Size
17 mm (0.67") (aspect ratio 16:10)
Display system
DLP chip x 1, DLP projection system
Number of pixels 2 304 000 pixels (1 920 x 1 200 dots)
Lens
*1
Electric zoom
1.7 to 2.4:1
Electric focus
F = 1.7 to 1.9
f = 25.6 mm to 35.7 mm
Light source
Laser diode x 2
Light output
*2
PT-RCQ10
10 000 lm
*3
(when [OPERATING MODE] in [OPERATION
SETTING] is set to [NORMAL])
PT-RCQ80
8 000 lm
*3
(when [OPERATING MODE] in [OPERATION
SETTING] is set to [NORMAL])
Center to corner zone ratio
*3
90 %
Contrast ratio
*3
10 000:1 (when [DYNAMIC CONTRAST] is set to [3])
Projected image size
*4
1.27 m (50") to 15.24 m (600")
Image aspect ratio
16:10
Projection method
[FRONT]/[FLOOR], [FRONT]/[CEILING], [REAR]/[FLOOR], [REAR]/[CEILING]
Power cord length
3.0 m (118-1/8")
Outer case
Molded plastic
Outer color
Black model
Black
White model
White
Dimensions
Width
498 mm (19-19/32")
Height
200 mm (7-7/8") (with legs at shortest position)
Depth
PT-RCQ10, PT-RCQ80
581 mm (22-7/8") (including standard zoom lens)
PT-RCQ10L, PT-RCQ80L
538 mm (21-3/16") (excluding the Lens Mount Cover and optional
lens)
Weight
PT-RCQ10, PT-RCQ80
Approx. 24.2 k] (53.3 lbs.)
*5
(including standard zoom lens)
PT-RCQ10L, PT-RCQ80L
Approx. 23.4 k] (51.5 lbs.)
*5
(excluding the Lens Mount Cover and
optional lens)
Noise level
*3
PT-RCQ10
43 dB (when [OPERATING MODE] in [OPERATION SETTING] is
set to [NORMAL])
40 dB (when [OPERATING MODE] in [OPERATION SETTING] is
set to [QUIET1])
38 dB (when [OPERATING MODE] in [OPERATION SETTING] is
set to [QUIET2])
PT-RCQ80
40 dB (when [OPERATING MODE] in [OPERATION SETTING] is
set to [NORMAL])
38 dB (when [OPERATING MODE] in [OPERATION SETTING] is
set to [QUIET])
Laser
Classification
Laser Class
USA and Canada: Class 3R (IEC 60825-1:2007)
Other countries or regions: Class 1 (IEC/EN 60825-1:2014)
Other countries or regions: Class 1 (IEC/EN 60825-1:2014)
Risk Group
Standard zoom lens, ET-DLE020,
ET-DLE035, ET-DLE055, ET-DLE060,
ET-DLE085, ET-DLE105, ET-DLE150,
ET-DLE170
Risk Group 2 (IEC 62471-5:2015)
ET-DLE250, ET-DLE350, ET-DLE450 Risk Group 3 (IEC 62471-5:2015)
Operating
environment
Operating
environment
temperature
*6
0 °C (32 °F) to 45 °C (113 °F)
Operating
environment
humidity
10 % to 80 % (no condensation)
10
PREFACE
< RCQ10 / RCQ80 >
Remote
control
Power supply
DC 3 V (AAA/R03/LR03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 The lens for PT-RCQ10L series and PT-RCQ80L series is sold separately.
*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*4 When the lens ET-DLE055 is used, the maximum size is 5.08 m (200"). When the lens ET-DLE035 is used, the maximum size is 2.54 m (100") to
8.89 m (350").
*5 Average value. Weight varies for each product.
*6 When using the projector at an altitude lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C
(86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2 700 m (8 858') and
4 200 m (13 780'), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the
projector.
Note
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP 2.2 compatible, Deep Color compatible
<SDI IN> terminal
1 set (BNC)
HD-SDI signal
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424, 425-2 compliant
<MULTI PROJECTOR SYNC
IN> terminal
1 set (BNC)
TTL high impedance
<MULTI PROJECTOR SYNC
OUT> terminal
1 set (BNC)
TTL output: Maximum 10 mA
<SERIAL IN>/ <SERIAL OUT>
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/ <REMOTE 1
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK> terminal
1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink (class 2)
compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
<LAN> terminal
1 set, RJ-45, for network connection, PJLink (class 2) compatible, 10Base-T/100Base-TX, Art-Net
compatible
Slot
1 set (blank), SLOT NX specification, for installing the Interface Board
<USB> terminal
1 set, USB connector (type A), for connecting the optional Wireless Module (Model No.: AJ-WM50 Series),
for connecting USB memory, for power supply (DC 5 V, maximum 500 mA)
Compliance standards
IEEE802.11b/g/n
Transmission method
DSSS, OFDM
Frequency range
(Channel)
2 412 MHz to 2 462 MHz (1 to 11ch)
Data transfer speed
(Standard value)
IEEE802.11n
Maximum 144 Mbps
IEEE802.11g
Maximum 54 Mbps
IEEE802.11b
Maximum 11 Mbps
Encryption method
WPA2-PSK (AES)
2. 2 Connecting terminal / slot
2. 3 Wireless LAN
To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model No.:
AJ-WM50 Series).
11
PREFACE
< RCQ10 / RCQ80 >
2. 4 Compatible signal
• For details of the types of video signals that can be used with the projector, refer to operating Instructions “List of compatible signals”
HDMI signal input
f
Moving image signal resolution: 480/60p, 576/50p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 594 MHz
DVI-D signal input
f
Moving image signal resolution: 480/60p, 576/50p to 1 920 x 1 080
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
f
Dot clock frequency: 25 MHz to 162 MHz
SDI signal input
HD-SDI signal
3G-SDI signal
6G-SDI signal
HD-SDI signal
3G-SDI signal
6G-SDI signal
*1
12G-SDI signal
*1
DIGITAL LINK signal input
f
Moving image signal resolution: 480/60p, 576/50p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 297 MHz
DisplayPort signal input
*2
f
Moving image signal resolution: 720/60p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 594 MHz
*1 This is supported when the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10) is installed in the slot.
*2 This is supported when the optional Interface Board for DisplayPort 2 input (Model No.: ET-MDNDP10) is installed in the slot.
12
PREFACE
< RCQ10 / RCQ80 >
2. 5. Dimensions
Unit: mm
498 (19-19/32")
442 (17-13/32")
457 (18")
221 (8-11/16")
20.5 (13/16")
115.5 (4-9/16")
200 (7-7/8")
249 (9-13/16")
43 (1-11/16")
538 (21-3/16")
* The above dimensions are obtained when the standard zoom lens is attached.
* Actual dimensions may differ depending on the product.
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.