Panasonic KV-S2087 (serv.man2) Service Manual ▷ View online
33
8.2.5.
Panel Unit
(1) Remove the Right Cover. (See 8.2.4.)
(2) Unlock the 4 Hooks and remove the FFC Cable to remove
(2) Unlock the 4 Hooks and remove the FFC Cable to remove
the Control Panel Unit.
(3) Remove the 2 Screw A and FFC Cable to remove the Panel
Board.
(4) Unlock the 3 Hooks to remove the LCD Board.
Control Panel Unit
Hook:
FFC Cable
A
Panel Board
LCD Board
Hook
FFC Cable
A
34
8.2.6.
Imprinter Door
8.2.7.
Bottom Plate
(1) Push the 2 Hooks inward (arrows
1
) to remove the Imprinter
Door.
(1) Remove the 8 Screws A.
(2) Remove the Bottom Plate.
(2) Remove the Bottom Plate.
Hook:
Imprinter Door
1
1
A
Bottom Plate
A
A
A
A
A
A
A
35
8.2.8.
Rear Cover and Fan
(1) Remove the Right Cover. (See 8.2.4.)
(2) Remove the Imprinter Door. (See 8.2.6.)
(3) Remove the Bottom Plate. (See 8.2.7.)
(4) Remove the Connector (CN14) on the MAIN Board.
(2) Remove the Imprinter Door. (See 8.2.6.)
(3) Remove the Bottom Plate. (See 8.2.7.)
(4) Remove the Connector (CN14) on the MAIN Board.
(5) Remove the Screw B.
(6) Unlock the 3 Hooks (arrow
(6) Unlock the 3 Hooks (arrow
1
).
(7) Insert a flathead screwdriver and push the Rear Cover
(arrow
2
) to unlock the Hook (C) as shown the picture.
(8) Remove the Rear Cover.
Feed
Motor
Motor
6pin
4pin
Connecto
r
MAIN Board
CN14
2pin
MAIN Board
Hook:
1 1
1
B
Rear Cover
< inside >
< outside >
22
(C)
2
(C)
36
8.2.9.
Left Cover
(9) Remove the Fan from the Rear Cover.
(1) Remove the Rear Cover. (See 8.2.8.)
(2) Unlock the Hooks (B) (arrow
(2) Unlock the Hooks (B) (arrow
2
) and 2 Hooks (C)
(arrow
3
).
(3) Remove the Left Cover, unlocking 2 Hooks (D)
(arrow
4
).
Reassembling Note 2 :
When attaching the Filter to the Main Unit, set it as
shown below.
shown below.
Rear Cover
Fan
Make sure to set the Filter at proper position and
direction like this.
direction like this.
Left Cover
(C)
(C)
(B)
3
2
4
4
(D)
(D)
(D)
(D)
(C)
(C)
(B)
3
Click on the first or last page to see other KV-S2087 (serv.man2) service manuals if exist.