Panasonic KV-S2087 (serv.man2) Service Manual ▷ View online
41
8.3.5.
Paper Feed Motor
(1) Remove the Exit Tray. (See 8.2.3.)
(2) Remove the 2 Screws A to remove the Right Inner Cover.
(3) Remove the 2 Door Lock Lever Springs.
(4) Remove the 2 Screws B1 and A1 to the remove Plate.
(5) Remove the Screw H to remove the Right Door Lock Lever.
(2) Remove the 2 Screws A to remove the Right Inner Cover.
(3) Remove the 2 Door Lock Lever Springs.
(4) Remove the 2 Screws B1 and A1 to the remove Plate.
(5) Remove the Screw H to remove the Right Door Lock Lever.
(6) Pull out the Shaft (arrow
1
).
(7) Remove the Open Lever by pushing (arrow
2
).
(8) Remove the 2 Screws A2 , the Screws B2, the Connector
and the Feed Drive Belt to remove the Paper Feed Motor
Unit.
Unit.
(9) Remove the 2 Screws D to remove Paper Feed Motor.
Right Inner Cover
A
A
Spring
Spring
H
Right Door
Lock Lever.
< Front Side >
<Back
Side >
B2
Shaft
2
Paper Feed
Motor
Motor
Connector
D
A2
A2
B1
A1
Plate
Feed Drive Belt
Open Lever
1
B1
42
8.3.6.
Exit Free Roller
(1) Remove the Center Inner Cover. (See 8.2.10.)
(2) Open the ADF Door a little to make easy to remove the
(2) Open the ADF Door a little to make easy to remove the
roller.
(3) Push (arrow
1
) and turn (arrow
2
) the Spacer to unlock.
(4) Pull out the Spacer from the Shaft (arrow
3
).
(5) Move the Exit Free Roller (arrow
4
) to remove from the
Roller Holder.
(6) Remove the Polysliders to remove Exit Free Rollers.
Spacer
Spacer
Shaft
1
2
4
ADF Door
3
Roller Holder
Exit Free Roller
Poly
Vlider
43
8.3.7.
Free Roller 1, 2 and 3
(1) Remove the CIS Relay Board. (See 8.3.4.)
(2) Remove the Paper Path Plate. (See 8.4.12.)
(3) Remove the 2 Screws A to separate the Exit Roller Cover.
(4) Remove the 4 Screws A1 and the Screw B.
(5) Remove the Roller Support Plate with Free Roller 3.
(6) Remove the 2 Springs and remove the Free Roller 2.
(7) Remove the 3 Springs and remove the Free Roller 1.
(8) Remove the Polysliders to remove the Free Rollers.
(2) Remove the Paper Path Plate. (See 8.4.12.)
(3) Remove the 2 Screws A to separate the Exit Roller Cover.
(4) Remove the 4 Screws A1 and the Screw B.
(5) Remove the Roller Support Plate with Free Roller 3.
(6) Remove the 2 Springs and remove the Free Roller 2.
(7) Remove the 3 Springs and remove the Free Roller 1.
(8) Remove the Polysliders to remove the Free Rollers.
A
Exit Roller Cover
Reassembling Note 1 :
A1
Free Roller 3
Roller Support Plate
Free Roller 2
Free Roller 1
Spring
A1
A1
B
(B)
A1
Reassembling Note 2 :
When attaching the Feed Roller 3 to the Roller Support Plate,
set the D Cut Face down.
set the D Cut Face down.
Make sure to set the Shafts properly.
OK
NG
Shaft
Spring
Free Roller 3
Roller Support Plate
D Cut Face down
44
8.4.
Main Chassis
8.4.1.
Double Feed Prevention Roller
(1) Double Feed Prevention Roller.
(2) Remove the Double Feed Prevention Roller Rubber parts
from the Pulley.
(3) Components parts.
Click on the first or last page to see other KV-S2087 (serv.man2) service manuals if exist.