Panasonic KV-S2087 (serv.man2) Service Manual ▷ View online
37
8.2.10.
Top Cover and Center Inner Cover
(1) Remove the Panel Unit. (See 8.2.5.)
(2) Remove the Left Cover. (See 8.2.9.)
(3) Remove the Top Cover by pushing Hooks (arrow
(2) Remove the Left Cover. (See 8.2.9.)
(3) Remove the Top Cover by pushing Hooks (arrow
1
).
(4) Remove the Exit Tray (See 8.2.3.)
(5) Remove the 2 Screws A to remove the Center Inner Cover.
(5) Remove the 2 Screws A to remove the Center Inner Cover.
A
Center Inner Cover
Hook:
A
Push here
Top Cover.
1
1
38
8.3.
Sub chassis
8.3.1.
Paper Feed Roller
(1) Remove the Feed Unit Fulcrum, the Feed Unit Lock Lever,
the Belt and the Poly-slider.
(2) Remove the Paper Feed Roller ass’y and the Separation
Roller ass’y.
(3) Remove the Paper Feed Roller and the Separation Roller.
Reassembling Note:
Poly-slider
Feed Unit Lock Lever
Feed Unit Fulcrum
Belt
Paper Feed Roller
Paper Feed Roller ass’y
Separation Roller ass’y
Paper Feed Roller
Separation Roller
Check if the direction of the
mark is correct.
Separation Roller
Separation Roller Holder
Polyslider
Polyslider
Polyslider
OK
NG
39
8.3.2.
CIS Unit (F)
(1) Pull the Tab (A) outward (arrow
1
) to unlock the Rib (B) of
the CIS Unit (F).
(2) Separate the CIS Unit (F) from Main Unit (arrow
2
).
(3) Remove the FCC Cable to remove the CIS Unit (F).
(4) Unlock the 9 Hooks.
(5) Separate the CIS (F) Cover from the Scanning Glass (F)
(5) Separate the CIS (F) Cover from the Scanning Glass (F)
Ass’y.
(6) Take out CIS (F) .
(7) Remove the Screw C and the Lock Spring to remove the
(7) Remove the Screw C and the Lock Spring to remove the
Reference Plate (B)
(B)
CIS Unit
(F)
(F)
(A)
1
Main Unit
2
FCC Cable
Scanning Glass (F) Assy
Reference Plate (B)
C
CIS
(F)
CIS Cover (F)
Lock Spring
Hook:
40
8.3.3.
Waiting Sensor Board-USS Board
8.3.4.
CIS Relay Board
(1) Remove the Exit Tray. (See 8.2.3.)
(2) Remove screw A and the Connector to remove the Waiting
(2) Remove screw A and the Connector to remove the Waiting
Sensor-USS Board.
A
A
Waiting Sensor-USS
Board.
CIS Relay Board
B
(1) Remove the Exit Tray. (See 8.2.3.)
(2) Remove screw A , B and the Connector to remove the CIS
(2) Remove screw A , B and the Connector to remove the CIS
Relay Board.
Click on the first or last page to see other KV-S2087 (serv.man2) service manuals if exist.