Panasonic CF-W5LWEZZBM Service Manual ▷ View online
53
9.3.3.10. Assembly of the W-LAN Module / Putting Memory Heat Sheet
W-LAN module
Screw
DXQT2+D25FNL
DXQT2+D25FNL
Antenna PCB-L assy
Black line
Antenna PCB-R assy
Gray line
Ferrite sheet
Screw
DXQT2+D25FNL
DXQT2+D25FNL
Connection
Connection
Connect the connection of antenna PCB-L Assy and
antenna PCB-R assy in the state of W-LAN module single goods.
Connect the connection of antenna PCB-L Assy and
antenna PCB-R assy in the state of W-LAN module single goods.
Connector direction
NG figure
NG figure
Connector direction
OK figure
OK figure
Board edge
application
application
Memory heat sheet
Direction of
character
character
Terminal root
application
application
The point of contact lubricant
is spread on the BATT terminal.
is spread on the BATT terminal.
From externals
54
9.3.3.12. Putting Sheets
Modem cable
PET tape wrapping
LAN cable
RJ cable sheet
Film Impedor wrapping
RJ cable sheet
Safety work
9.3.3.11. Assembly of theMODEM Cable
Grease (G-751)
Heat spleader bottom
A two sided tape is pressurized.
Connector corner match
55
Connector direction
change
change
3mm
3mm
5mm
From the coil
externals
externals
1mm
PET tape
PET tape
Processes in the dotted line
SW cable sheet
Between cushion and addable
memory Processing
memory Processing
Processes between the
connector and the coil
connector and the coil
Between cushion and coil
processing
processing
Heat cushion is affixed in the place without the chip
wireless LAN connector sideward.
Do not run aground in the chip on side.
It is unquestionable for the inclination as long as does
not run aground.
wireless LAN connector sideward.
Do not run aground in the chip on side.
It is unquestionable for the inclination as long as does
not run aground.
Heat sheet cushion
56
9.3.3.13. Assembly of the W-LAN Sheet
9.3.3.14. Assembly of the HDD FPC
SW cable sheet
Vertical direction
< Preparation of WLAN sheet >
WLAN sheet
WLAN sheet
(note)
The flaking off paper of a both
sided tape is peeled off and affixes.
The flaking off paper of a both
sided tape is peeled off and affixes.
Sheet is lightly held by the finger and the fold
habit is applied.
When suppressing, the fold habit is applied so
as not to overflow the box sheet metal externals.
habit is applied.
When suppressing, the fold habit is applied so
as not to overflow the box sheet metal externals.
Chip bottom match on board
Horizontal direction
Silk line match on board
Silk line match on board
Runs side
by side.
by side.
The cutting lack part is
inserted, and puts into
the state of the roll.
inserted, and puts into
the state of the roll.
Horizontal direction is a
suiting sheet copper part
externals.
suiting sheet copper part
externals.
Vertical direction is a
suiting transparent sheet
part externals.
suiting transparent sheet
part externals.
DC IN cable
The line is drawn out between the coil and
the connector, and the main line is prevented
from running aground in the coil and the connector.
the connector, and the main line is prevented
from running aground in the coil and the connector.
Safety work
Connection
CPU cushion
Silk is made a
sign and affixes
sign and affixes
Click on the first or last page to see other CF-W5LWEZZBM service manuals if exist.