Panasonic CF-W5LWEZZBM Service Manual ▷ View online
41
9.3.2.8. Assembly of the Inverter and Putting Inverter Tapes
Safety Work
Safety Work
Safety Work
Plinth externals
standard
standard
The putting use
for the sheet is
the next.
for the sheet is
the next.
Plinth externals standard
The damper is pressurized.
Safety Work
The corner part of the
case is pressurized.
case is pressurized.
Inverter case is arranged in the dotted line part.
Two sided 3 tapes of the back are peeled off before affixes
The damper is pressurized.
From the rib edge
When inverter tape is affixed on the LCD reception desk rib side,
the treatment device is used.
the treatment device is used.
Affixes along shape
Affixes along shape
Do not suppress the tab
Inverter tape
Rib root application
Safety work
Safety work
Safety work
42
9.3.2.9. Line processing LCD Cable
The cable is processed to the LCD frame clamping
PET tape
m
Safety Work
The built-in order
The built-in order
The built-in order
Connector connection
A blue, white line is prevented
from lying on top of one another
from lying on top of one another
Peel off the LCD sheet
Overlaps on the connector and affixes
A red line of the cable is matched
to the LCD frame externals
to the LCD frame externals
Connector and conductive cloth wrapping part,
it affixation is surely kicked.
(The cable side is picked up and affixed)
it affixation is surely kicked.
(The cable side is picked up and affixed)
After LCD sheet is turned over and conductive
cloth is put, a both sided tape is put.
cloth is put, a both sided tape is put.
Conductive cloth
All the signal lines are
processed the conductive cloth internally.
processed the conductive cloth internally.
Insulation sheet edge match
Connector
Externals edge match
Externals edge match
PET tape
PET tape is processed in
parallel to the conductive cloth.
parallel to the conductive cloth.
The cable is prevented being processed
on damper.
The room not done to the state is given.
on damper.
The room not done to the state is given.
PET tape is put with along
LCD of the cable.
LCD of the cable.
Safety Work
Safety Work
43
Safety work
Safety work
The tape is distributed at the
center and pasting applying.
center and pasting applying.
The cable is prevented from
running aground on the cushion.
running aground on the cushion.
The remainder is put
on the hinge side.
on the hinge side.
Hinge-R
Gasket cloth
Cable edge match
Damper is prevented from
running aground in the cable.
running aground in the cable.
Externals match of reflector
Plinth externals match
LCD front is applied to the
wall and pasting applying.
wall and pasting applying.
Put on the
hinge surely.
hinge surely.
Put the reflector
part surely.
part surely.
The cable is prevented from
coming in succession mutually.
coming in succession mutually.
LCD damper C
LCD frame externals
standard
standard
9.3.2.10. Putting Tapes of LCD Cable
Rear damper
Hinge L
Safety work
The cable must not be processed on the damper,
and give cable room.
and give cable room.
Frame externals match
Damper is applied to the wall
of LCD front and affixes.
of LCD front and affixes.
44
9.3.2.11. Putting LCD Rear Cushions
9.3.2.12. Assembly of the WM Cable
LCD rear cushion
LCD rear cushion
LCD rear spacer
LCD rear spacer
Rear difference part match
Rear difference part
LCD rear WAN
Spacer is matched
to the wall and affixes.
to the wall and affixes.
Affixation to the slope part
is affixed along shape.
is affixed along shape.
Affixation to the slope part
is affixed along shape.
is affixed along shape.
Spacer is matched
to the wall and affixes.
to the wall and affixes.
WM cable
Conductive cloth is wrapped.
The two sided tape put when goods is delivered is peeled off.
Abandonment processing
Abandonment processing
A-ACross section
Overlap affixation of about 5mm
Overlap affixation of about 5mm
Black seat edge standard
Black seat edge standard
Finished
chart
Finished
chart
Conductive cloth
conductive cloth
Conductive cloth
from conductive cloth
from conductive cloth
Filn Impedor is wrapped
Cover Filn Impedor completely
Pet tape is wrapped.
A two sided tape is affixed
to the connector flat side
to the connector flat side
Connector flat side
Film impedor
PET tape
Two sided tape
Safety Work
Click on the first or last page to see other CF-W5LWEZZBM service manuals if exist.