DOWNLOAD Panasonic CF-T5LWETZBM Service Manual ↓ Size: 26.62 MB | Pages: 127 in PDF or view online for FREE

Model
CF-T5LWETZBM
Pages
127
Size
26.62 MB
Type
PDF
Document
Service Manual
Brand
Device
PC / NOTEBOOK COMPUTER
File
cf-t5lwetzbm.pdf
Date

Panasonic CF-T5LWETZBM Service Manual ▷ View online

41
4.4mm
LCD Rear
Pen Holder
Pen Holder
Pen Holder
Pen Holder Tape
Pen Holder Tape
Holder Bottom Sheet
Pen Holder is put with Pen Holder Tape 
by using Tool for LCD Rear. 
Affixation load : More than
The pressurizing time with 
the tool is 3 seconds or more. 
After the penholder is installed, 
the pen is detached once,
and It is confirmed that there is 
not a pen fall in. 
Affixeson Holder Bottom Sheet. 
The hole of the tape is matched 
to the hollow of the insertion part 
of the pen. Affixes from externals 
internally by 0.5mm or more. 
Arranges match to the rib in the 
back of Pen Holder. 
LCD Rear side standard
(Convex of the hinge part is disregarded)
42
LCD REAR WAN
LCD REAR CUSHION
LCD REAR CUSHION
9.3.2.14. Putting LCD Rear Cushions
WM CABLE
Conductive cloth is wrapped. 
A-ACross section
Overlap affixation of about 5mm
Overlap affixation of about 5mm
Black seat edge standard
Black seat edge standard
Finished 
Finished 
chart
chart
Finished 
chart
Conductive cloth
Conductive cloth
3-7mm from Conductive cloth
3-7mm 
from Conductive cloth
0-5mm 
from Conductive cloth
Filn Impedor is wrapped
Cover Filn Impedor completely
Pet Tape is wrapped.
A two sided tape is affixed 
to the connector flat side
Connector flat side
Film Impedr
Two sided tape
Safety Work
9.3.2.15. Assembly of the WM Cable
43
WWAN  Board
WM Cable
Screw
Screw
Screw
REAR wall application
LCD Hook WAN
   LCD Hook Wan installation standard
Connection
REAR wall application
   There is no order specification 
   excluding a specified part.
The oreder of tightening screw (LCD Hook WAN) : 
The oreder of tightening screw (WWAN Board) : 
9.3.2.16. Assembly of the WWAN Board
Refer to Figure 1
The cable must not stretch. 
The cable must not stretch. 
The cable must not stretch. 
A two sided tape of the cable after the cable position 
of Figure 1 is put out is affixed (cable fixation). 
A two sided tape of the cable after the cable position 
of Figure 1 is put out is affixed (cable fixation)
<Figure 1>
The convex REAR part is set to the cable bundling part
Conductive cloth
Conductive cloth
edge standard
Bundling edge standard 5-8mm
Conductive cloth
must not hang to PET TAPE
about 15mm
about 15mm
about 15mm
Safety work
PET TAPE
Root fixation
9.3.2.17. Putting Tapes for WM Cable
44
The cable must not stretch. 
The cable must not stretch. 
Refer to Figure 1. 
The convex part is matched to a black tape. 
5-8mm
Cable fixation
A two sided tape of the cable after the cable position 
of Figure 1 is put out is affixed (cable fixation). 
A two sided tape of the cable after the cable position 
of Figure 1 is put out is affixed (cable fixation). 
PET TAPE
(width L=30 of 19mm)
WWAN ANTENNA(MAIN)
SCREW
WWAN ANTENNA(SUB)
CABLE BLIND SHEET
SCREW
SCREW
SCREW
SCREW
The coaxial cable connector is processed 
in the corner hole of the substrate 
Paper tape
CABLE FIXED SHEET
Clamp
Clamp
The cable is fixed 
with the paper tape
Corner hole externals standard
This is clamped on the right side 
This is clamped 
in the upper part 
Clamp
This is clamped on the right side 
This is clamped 
in the upper part 
After the cable is processed to the ditch of REAR, 
CABLE FIXED SHEET is affixed 
NEXT
Wall application affixation
Safety work
The oreder of tighting screw: 
9.3.2.18. Assembly of the WWAN Antenna Board (MAIN), (SUB)
Page of 127
Display

Click on the first or last page to see other CF-T5LWETZBM service manuals if exist.