DOWNLOAD Panasonic CF-T5LWETZBM Service Manual ↓ Size: 26.62 MB | Pages: 127 in PDF or view online for FREE

Model
CF-T5LWETZBM
Pages
127
Size
26.62 MB
Type
PDF
Document
Service Manual
Brand
Device
PC / NOTEBOOK COMPUTER
File
cf-t5lwetzbm.pdf
Date
PREV: Panasonic CF-T5 (serv.man3) Service Manual / Parts change notice

Panasonic CF-T5LWETZBM Service Manual ▷ View online

25
9.2.5.  Removing the Touch Pad
Preparation : perform the section 9.2.1., 
9.2.2.
and 9.2.4. first.
1. Peel off the tape.
Tape : DFHP7140ZA (K37)
2. Depress to center the 6 hooks of the pad cover, (C)
(D) (E) as order.
3. Remove the hook (F) and remove the touch pad.
Tape
Hook(D)
Hook(E)
Hook(F)
Hook(F)
PAD FFC
Top Case
Hook(F)
Hook(F)
Pad Cover
Touch Pad
Pad Button
5. Lift up the top case and remove the pad FFC and
then remove the top case.
Pad FFC
Top Case
26
9.2.8.  Removing the Main Board
Preparation : perform the section 9.2.1., 9.2.2.
and 9.2.4. first.
1. Remove the 1 screw (I ), 1 screw (J), 2 screws (K)
and 2 screws (L ).
Screw (I ) : DXQT2+E10FNL (N10)
Screw (J) : DXQT2+D4FNL (N9)
Screw (K) : DFHE5035ZB (N2)
Screw (L) : K1YE50000022 (N1003)
2. Remove the 2 screws (M).
Screw (M) : DXQT2+E6FNL (N12)
3. Remove the modem cable from the MDC modem.
4. Remove the side cover (L) from the bottom case.
5. Remove the DC jack holder on the DC-IN jack.
DC Jack
Holder
Side Cover (L)
Antenna Board (L)
Screw (N)
Screw (N)
Main Board
LAN Cable
Modem Cable
Tape
Screw ( I )
Screw (J)
Screw (K)
Screw (L)
9.2.6.  Removing the LCD Knob and the
Speaker
Preparation : perform the section 9.2.1., 9.2.2.
and 9.2.4. first.
1. Remove the latch spring from the top case.
2. Remove the hook of the LCD knob from stopper rib
of the top case.
3. Peel off the4.Peel off the tape on the speaker and
speaker ring and then remove the speaker.
Speaker Box
Speaker
Speaker
Ring
Location of the Spring
Latch
Spring
LCD Knob
9.2.7.  Removing the USB Board
Preparation : perform the section 9.2.1., 9.2.2.
and 9.2.4. first.
1. Peel off the tapes and RJ cable sheet for clamp the
USB cable.
Tape : TPD-X0033A (S1001)
RJ Cable Sheet : DFHR3C13ZA (K53)
2. Remove the connector (CN23) on the main board.
3. Remove the USB board from the bottom case.
CN23
Tape
2-Port USB Board
USB Cable
27
6.Remove the LCD cable connectors (CN10,CN11).
7. Turn it to arrow and remove the lithium battery
connector (CN3) and HDD FPC connector (CN4).
8. Peel off the tape from LAN cable and then remove
the LAN cable connector (CN16).
Tape : TPD-X0033A (S1001)
9. Remove the main board.
CN3
LAN
Cable
CN16
CN600
DC-IN Cable
Lithium Battery
Cable
Tape
Power Knob
LAN SW Knob
9.2.9. Removing the Antenna
Board (L,R) and the DC-IN Cable
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.8. first.
1. Remove the antenna cable (L) from the main
terminal and the antenna cable (R) from the AUX
terminal and then remove the antenna board (L, R)
from the bottom case.
2. Remove the DC-IN cable (CN600) from the main
board.
Antenna Cable(L)
Antenna Cable(R)
CN600
DC-IN
Cable
Antenna Board(L)
Antenna Board(R)
9.2.10. Removing the Wireless LAN
Module
reparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.8. first.
1. Remove the 2 screws (N) and then remove the
Wireless LAN module.
Screw (N) : DXQT2+D25FNL (N8)
Wireless LAN 
Module
Main Board
Screw (L)
Screw (L)
CN10
CN11
LCD Cable
28
9.2.11.  Removing the MODEM
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.8. first.
1. Remove the 2 screws (O).
Screw (O) : DXQT2+D25FNL (N8)
2. Remove the MODEM from main board connector
(CN18) as vertical.
Screw (O)
Screw (O)
CN18
Modem
9.2.12.  Removing the Card Bus Ejector
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.8. first.
1. Remove the 1 screw (P) from connection side of
wireless LAN.
Screw (P) : DFHE5025XA (N1)
2.Turn to the card bus ejector side.
3. Remove the 2 hooks (G) from the connector
(CN14).
Main Board
Screw (Q)
Main Board
Card Bus Ejector
Hook (G)
CN14
9.2.13.  Removing the LCD Unit
Preparation : perform the section 9.2.1., 9.2.2.
and 9.2.4. first.
1. Remove the 2 screws (Q).
Screw (Q) : DXQT26+D5FNL (N13)
2. Remove the LCD cable from the connector (CN11)
of the main board.
3. Remove the inverter cable from the connector
(CN10).
4. Disconnect the connectors (CN603, CN28) of the
main board.
CN10
CN603
CN28
CN11
 Screw (Q)
LCD Cable
Screw (Q)
Page of 127
Display

Click on the first or last page to see other CF-T5LWETZBM service manuals if exist.

RANDOM: