Panasonic UB-T780 Service Manual ▷ View online
33
UB-T780
6.4.
Covers and AC Inlet
6.4.1.
When mounting using the wall mounting plates
Before performing the following steps, prepare the bench as shown below:
The bench must be able to hold the weight of elite Panaboard [Approx. 26 kg (57.32 lbs)] and the following size.
The bench must be able to hold the weight of elite Panaboard [Approx. 26 kg (57.32 lbs)] and the following size.
1.
Refer to the section 3.6 “Assembling the elite Pananoard”, and remove the elite Panaboard from the wall.
2.
To prevent damage to the surface of elite Panaboard screen, with the screen surface of the elite Panaboard facing up, put the
elite Panaboard on the bench as shown in the following.
elite Panaboard on the bench as shown in the following.
34
UB-T780
6.4.1.1.
Side Cover L, Upper Front Cover and Side Cover R
<Side Cover L>
<Upper Front Cover>
<Side Cover R>
1. Remove the 2 screws (A).
2. Remove the side cover L while turning the side cover L in the direction of the arrow (1) .
2. Remove the side cover L while turning the side cover L in the direction of the arrow (1) .
1. Remove the 2 screws (B).
2. Remove the upper front cover while turning the upper front cover in the direction of the arrow (2) .
2. Remove the upper front cover while turning the upper front cover in the direction of the arrow (2) .
1. Remove the 2 screws (C).
2. Remove the side cover R while turning the side cover R in the direction of the arrow (3) .
2. Remove the side cover R while turning the side cover R in the direction of the arrow (3) .
35
UB-T780
6.4.1.2.
Right Upper Corner Covers
Before performing the following steps, remove the upper front cover and side cover R (refer to the section 6.4.1.1 “Side Cover L,
Upper Front Cover and Side Cover R”).
Upper Front Cover and Side Cover R”).
1. Remove the 3 screws (D).
2. Remove the right upper corner cover front.
3. Remove the 2 screws (E).
4. Remove the right upper corner cover rear.
2. Remove the right upper corner cover front.
3. Remove the 2 screws (E).
4. Remove the right upper corner cover rear.
36
UB-T780
6.4.1.3.
Sensor Covers
Before performing the following steps, remove the upper front cover and side cover L (refer to the section 6.4.1.1 “Side Cover L,
Upper Front Cover and Side Cover R”).
Upper Front Cover and Side Cover R”).
1. Remove the 2 screws (F).
2. Remove the sensor cover front.
3. Remove the 4 screws (G).
4. Remove the sensor cover back.
2. Remove the sensor cover front.
3. Remove the 4 screws (G).
4. Remove the sensor cover back.
Click on the first or last page to see other UB-T780 service manuals if exist.