Panasonic UB-T780 Service Manual ▷ View online
17
UB-T780
3.6.
Assembling the elite Panaboard
<For Wall Mounting>
1. Loosely wrap the power cord with the cable tie, and plug the
1. Loosely wrap the power cord with the cable tie, and plug the
power cord into the AC inlet.
• Connect the power cord to the elite Panaboard before install-
ing on a wall.
2. Insert the end of the cable tie into the cable tie fastening hole on
the lower frame cover.
3. Pull the loose end of the cable tie to tighten it, and install the
power cord depending on the location of the outlet, as illustrated
in the following diagrams.
in the following diagrams.
• When attaching the power cord downward.
• When attaching the power cord along the lower side of the
elite Panaboard.
4. Hang the elite Panaboard on the wall mounting plates with the
screw heads.
18
UB-T780
Notice
•
Take care not to injure yourself on the board attachments when
attaching the lower frame cover.
attaching the lower frame cover.
•
When mounting on a wall, do not hit or jolt the elite Panaboard.
•
After mounting, gently apply some weight on the elite Panaboard to
make sure that it is securely fastened to the wall.
make sure that it is securely fastened to the wall.
Note
•
After installation is complete, use the included cable holder to man-
age the power cord and USB cable.
age the power cord and USB cable.
5. Remove the lower frame cover.
Remove the left and right screws, and then remove the lower
frame cover from the main unit of the elite Panaboard.
frame cover from the main unit of the elite Panaboard.
6. Remove the 4 latches from the board attachment by pushing them
towards the rear.
7. Fasten to the wall.
Using the remaining 4 screws, securely fasten the lower portion of
the board attachment to the wall.
the board attachment to the wall.
8. Reattach the lower frame cover.
Attach the lower frame cover to the lower side of the elite Pana-
board, and tighten both left and right screws so that the cover
does not protrude.
board, and tighten both left and right screws so that the cover
does not protrude.
19
UB-T780
Notice
•
Do not use thinner, benzine, or abrasive chemicals to clean. (Doing
so can result in discoloration.)
so can result in discoloration.)
•
Do not wipe the screen board with a dry cloth. (Doing so can cause
static electricity build-up.)
static electricity build-up.)
9. Wipe the screen board surface.
Gently wipe the screen board surface with a soft, moist cloth.
10. Confirm that the elite Panaboard can operate. (Refer to the sec-
tion 3.7 Confirming the elite Panaboard Operation.)
<For Mounting on a Stand (Sold Separately)>
1. Attach the power cord.
1. Attach the power cord.
• Connect the power cord to the elite Panaboard before installing
on the stand.
2. Depending on the location of the outlet, install the power cord as
illustrated in the following diagrams.
• When attaching the power cord downward.
• When attaching the power cord along the lower side of the elite
Panaboard.
20
UB-T780
Note:
• After installation is complete, use the included cable holder
to manage the power cord and USB cable.
Note:
•
Do not use thinner, benzine, or abrasive chemicals to clean. (Doing
so can result in discoloration.)
so can result in discoloration.)
•
Do not wipe the screen board with a dry cloth. (Doing so can cause
static electricity build-up.)
static electricity build-up.)
3. Hang the elite Panaboard on the stand with the screw heads.
4. Secure the elite Panaboard to the stand frame using the two-wing
bolts (M5 x 12 mm [
1
/
2
in.] [2 count] included with stand.
5. Wipe the screen board surface.
Gently wipe the screen board with a soft, moist cloth.
6. Confirm that the elite Panaboard can operate. (Refer to the sec-
tion 3.7 Confirming the elite Panaboard Operation.)
Click on the first or last page to see other UB-T780 service manuals if exist.