Panasonic UB-T780 Service Manual ▷ View online
37
UB-T780
6.4.1.4.
Pen Tray Covers
Before performing the following steps, remove the lower front cover (refer to the section 6.1 “LED Board and Control Board”) and
side cover R (refer to the section 6.4.1.1 “Side Cover L, Upper Front Cover and Side Cover R”).
side cover R (refer to the section 6.4.1.1 “Side Cover L, Upper Front Cover and Side Cover R”).
1. Remove the 6 screws (H).
2. Remove the pen tray cover front with a pen tray.
3. Remove the 3 screws (I).
4. Remove the pen tray cover back.
2. Remove the pen tray cover front with a pen tray.
3. Remove the 3 screws (I).
4. Remove the pen tray cover back.
5. Open the pen tray as shown in the Figure-1, and move the pen tray in the direction of the arrow (2) . (Figure-2)
6. Remove the 3 screws (J), then separate the pen tray outer from the pen tray inner. (Figure-3)
6. Remove the 3 screws (J), then separate the pen tray outer from the pen tray inner. (Figure-3)
38
UB-T780
6.4.1.5.
AC Inlet
Before performing the following steps, remove the following parts.
• Lower Front Cover, Control - Power Cover Front, Control PCB Cover Plate and Power Box Cover Plate (refer to the section 6.1
“LED Board and Control Board”).
• Side Cover L (refer to the section 6.4.1.1 “Side Cover L, Upper Front Cover and Side Cover R”).
1. Remove the screw (A) and ground harness.
2. Disconnect the inlet harness.
3. Remove the 2 screws (B) and AC switch unit.
2. Disconnect the inlet harness.
3. Remove the 2 screws (B) and AC switch unit.
4. Remove the 3 screws (C) and control - power cover back.
5. Remove the 3 screws (D) and AC inlet assembly
5. Remove the 3 screws (D) and AC inlet assembly
39
UB-T780
6.4.2.
When mounting using a stand (sold separately)
6.4.2.1.
Side Cover L, Upper Front Cover and Side Cover R
<Side Cover L>
<Upper Front Cover>
<Side Cover R>
1. Remove the 2 screws (A).
2. Remove the side cover L while turning the side cover L in the direction of the arrow (1) .
2. Remove the side cover L while turning the side cover L in the direction of the arrow (1) .
1. Remove the 2 screws (B).
2. Remove the upper front cover while turning the upper front cover in the direction of the arrow (2) .
2. Remove the upper front cover while turning the upper front cover in the direction of the arrow (2) .
1. Remove the 2 screws (C).
2. Remove the side cover R while turning the side cover R in the direction of the arrow (3) .
2. Remove the side cover R while turning the side cover R in the direction of the arrow (3) .
40
UB-T780
6.4.2.2.
Right Upper Corner Covers
Before performing the following steps, remove the upper front cover and side cover R (refer to the section 6.4.2.1 “Side Cover L,
Upper Front Cover and Side Cover R”).
Upper Front Cover and Side Cover R”).
6.4.2.3.
Sensor Covers
Before performing the following steps, remove the upper front cover and side cover L (refer to the section 6.4.2.1 “Side Cover L,
Upper Front Cover and Side Cover R”).
Upper Front Cover and Side Cover R”).
1. Remove the 3 screws (D).
2. Remove the right upper corner cover front.
3. Remove the 2 screws (E).
4. Remove the right upper corner cover rear.
2. Remove the right upper corner cover front.
3. Remove the 2 screws (E).
4. Remove the right upper corner cover rear.
1. Remove the 2 screws (F).
2. Remove the sensor cover front.
3. Remove the 4 screws (G).
4. Remove the sensor cover back.
2. Remove the sensor cover front.
3. Remove the 4 screws (G).
4. Remove the sensor cover back.
Click on the first or last page to see other UB-T780 service manuals if exist.