Panasonic KV-S4065CL / KV-S4065CW / KV-S4065CWCN / KV-S4085CL / KV-S4085CW / KV-S4085CWCN Service Manual ▷ View online
45
8.2.10.
Hopper Plate
(1) Remove the Front Hopper Cover. (See 8.2.9.)
(2) Remove the screw from each Lift Guide on each side.
(3) After releasing the hooks inside the Hopper Plate, lift the
plate in the direction of the arrow to remove it.
plate in the direction of the arrow to remove it.
(4) Remove the screw with FG cable.
(5) Disconnect the connector to Paper Sensor.
46
8.2.11.
Paper Sensor
8.2.12.
Hopper Motor
(1) Remove the Hopper Plate. (See 8.2.10.)
(2) Remove the screw to release the Paper Sensor with plate
from the Hopper Plate.
from the Hopper Plate.
(3) Remove the screw.
(1) Remove the Hopper Plate. (See 8.2.10.)
(2) Remove the 2 screws, and then disconnect the connector to
the Hopper Motor.
the Hopper Motor.
47
8.2.13.
Front Cover
8.2.14.
Top Cover
(1) Open the Pre-imprinter Door.
(2) Remove the 2 screws.
(3) Pull the Front Cover forward while lifting it slightly.
(1) Remove the Right Cover. (See 8.2.1.)
(2) Remove the Left Cover. (See 8.2.2.)
(3) Remove the Stacker (Pre-imprinter Door). (See 8.2.5.)
(4) Remove the Front Cover. (See 8.2.13.)
(5) Remove the screw on the left.
(6) Remove the screw on the right.
48
(7) Release the 2 hooks, and then remove the Top Cover, lifting
it slightly so as not to bring it into contact with the
Transportation Screw.
it slightly so as not to bring it into contact with the
Transportation Screw.
Click on the first or last page to see other KV-S4065CL / KV-S4065CW / KV-S4065CWCN / KV-S4085CL / KV-S4085CW / KV-S4085CWCN service manuals if exist.