Panasonic KV-S1065C / KV-S1046C (serv.man3) Service Manual ▷ View online
45
(10) Unlock the Conveyor Roller by turning the hook of the
Conveyor Roller Bearing in the direction of the arrow (1),
while pushing the tip of the hook in the direction of the
arrow (0).
Conveyor Roller Bearing in the direction of the arrow (1),
while pushing the tip of the hook in the direction of the
arrow (0).
(11) Slide the Conveyor Roller with the Conveyor Roller Bearing
in the direction of the arrow (2), and remove it from the
notch in the scanner.
in the direction of the arrow (2), and remove it from the
notch in the scanner.
(12) Remove the Support-bearing.
(13) Remove the Conveyor Roller Bearing from the Conveyor
Roller after removing the poly slider.
Roller after removing the poly slider.
46
8.3.4.
Exit Roller
(1) Remove the Front Cover. (See 8.2.4.)
(2) Remove the screw (a) and the Tension-plate Assembly
with the spring. Then remove the 2 screws (b) and the
Side-plate Assembly.
with the spring. Then remove the 2 screws (b) and the
Side-plate Assembly.
(3) Remove the Conveyor Belt from the Exit Roller.
Reassembling Note: Tension-plate Assembly
(including BELT LAYOUT)
→ See 8.3.2.
(4) Pull and remove the Pulley of the Exit Roller in the
direction of the arrow, while releasing the stopper on the
pulley.
direction of the arrow, while releasing the stopper on the
pulley.
Reassembling Note:
After reassembling the Pulley, be sure to check that
the Pulley is locked to the Exit Roller by pulling the
After reassembling the Pulley, be sure to check that
the Pulley is locked to the Exit Roller by pulling the
pulley.
47
(5) Slide and remove the bearing from the Exit Roller in the
direction of the arrow.
direction of the arrow.
(6) Unlock the Exit Roller by turning the hook of the Conveyor
Roller Bearing in the direction of the arrow (1), while
pushing the tip of the hook in the direction of the arrow (0).
Roller Bearing in the direction of the arrow (1), while
pushing the tip of the hook in the direction of the arrow (0).
(7) Slide the Exit Roller with the Conveyor Roller Bearing in the
direction of the arrow (2), and remove it from the notch in
the scanner.
direction of the arrow (2), and remove it from the notch in
the scanner.
(8) Remove the Support-bearing.
(9) Remove the Conveyor Roller Bearing from the Exit Roller,
while unlocking the poly slider.
while unlocking the poly slider.
48
8.3.5.
Paper Feed Roller
(1) Remove the Paper Feed Roller. (See 7.3.1-(1) to (4))
(2) Remove the spacer from the Paper Feed Roller Shaft, while
unlocking the poly slider.
unlocking the poly slider.
(3) Slide and remove the Feed Roller Assy. from the shaft.
(4) Unlock and remove the 2 poly sliders from the shaft.
(5) Slide and remove the Feed Roller Assy. from the shaft.
Click on the first or last page to see other KV-S1065C / KV-S1046C (serv.man3) service manuals if exist.