Panasonic KV-S1037 / KV-S1038 / KV-S1026C-M2 / KV-S1026C-J2 Service Manual ▷ View online
13
5 Installation Instructions
5.1.
Required Space Around the Scanner
Refer to the concerned pages of Operating Manual (See 16. Appendix ((Operating Manual P.13).)
5.2.
Included Accessories
Confirm that the following items are included with this scanner.
Refer to the concerned pages of Operating Manual (See 16. Appendix ((Operating Manual P.9).)
Refer to the concerned pages of Operating Manual (See 16. Appendix ((Operating Manual P.9).)
5.3.
Installing the Unit
Refer to the concerned pages of Operating Manual (See 16. Appendix ((Operating Manual P.13).)
5.4.
Viewing Operating Manual and Help Installed
Refer to the concerned pages of Operating Manual (See 16. Appendix ((Operating Manual P.15).)
5.5.
System Requirements
Note
• The above system requirements may not satisfy the requirements of all operating systems.
• The scanning speed differs depending on the host computer's operating environment or the application used.
• Due to the slower speed of USB 1.1, it is recommended to use a USB 2.0 / USB 3.0 / USB 3.1 interface.
• If you connect the scanner to a USB hub, it is not guaranteed to work.
• To use the SharePoint Output with Image Capture Plus, Microsoft
• The scanning speed differs depending on the host computer's operating environment or the application used.
• Due to the slower speed of USB 1.1, it is recommended to use a USB 2.0 / USB 3.0 / USB 3.1 interface.
• If you connect the scanner to a USB hub, it is not guaranteed to work.
• To use the SharePoint Output with Image Capture Plus, Microsoft
®
.NET Framework 4.0 or later must be installed.
Please install Microsoft
®
.NET Framework 4.0 or later.
• To use the SharePoint Online Output with Image Capture Plus, Microsoft
®
.NET Framework 4.0 or later must be installed.
Please install Microsoft
®
.NET Framework 4.0 or later.
• To use the SharePoint Online Output with Image Capture Plus, the operating system must be Microsoft
®
Windows 7 or later,
or Microsoft
®
Windows Server 2008 R2 or later.
• To use the FTP Output with Image Capture Plus, Microsoft
®
.NET Framework 3.5 must be installed.
Please install Microsoft
®
.NET Framework 3.5 or later.
• To use the Image Capture Plus Express, Microsoft
®
.NET Framework 3.5 must be installed.
Please install Microsoft
®
.NET Framework 3.5 or later.
Trademarks
• Microsoft, Windows, Windows Vista, Windows Server, and Internet Explorer are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
• IBM and AT are trademarks of International Business Machines Corporation in the United States, other countries, or both.
• Intel and Intel Core are trademarks of Intel Corporation in the U.S. and other countries.
• All other trademarks identified herein are the property of their respective owners.
• Intel and Intel Core are trademarks of Intel Corporation in the U.S. and other countries.
• All other trademarks identified herein are the property of their respective owners.
Computer
IBM
®
PC/AT or compatible machine with a CD-ROM drive
CPU
Intel
®
Core
TM
2 Duo 1.8 GHz or higher
Operating System
Microsoft
®
Windows
®
Vista operating system SP2 or later
Microsoft
®
Windows
®
7 operating system
Microsoft
®
Windows
®
8 operating system
Microsoft
®
Windows
®
10 operating system
Microsoft
®
Windows
®
Server 2003
Microsoft
®
Windows
®
Server 2008
Microsoft
®
Windows
®
Server 2012
Microsoft
®
Windows
®
Server 2016
Interface
USB 2.0 / USB 3.0 / USB 3.1
Memory
1 GB or higher
Hard Disk Drive
5 GB or more free space is required.
14
5.6.
Installing the Software
Refer to the concerned pages of Operating Manual (See 16. Appendix ((Operating Manual P.14).)
5.7.
Uninstalling the Software
Refer to the concerned pages of Operating Manual (See 16. Appendix ((Operating Manual P.55).)
5.8.
Setting Documents and/or Card
Note:
*1: The total height of all the documents should be less than 5.0 mm (0.2 in.)
Refer to the “Compatible Paper” of the Operating Manual (See 16. Appendix (Operating Manual P.22).)
*2: The total height of the cards should be less than 5.0 mm (0.2 in.)
*3: The total height of all the documents should be less than 2mm (0.08 in.)
(This is equivalent to about 20 sheets at 80 g/m² or 20 lb.)
*4: When using the Mixed Batch Card Guide, the document guides can not be adjusted to a width smaller than A5.
*5: ISO format card
Size: 85.6 x 54.0 mm (3.4 in. x 2.1 in.), Thickness: 0.76 mm (0.03 in.),Embossed card up to 1.24 mm (0.049 in.)
- Embossed card is also supported.
When scanning embossed cards, it is recommended to place them in landscape orientation with the side to be
scanned facing up.
- Ensure that the embossed portions of cards do not stick together.
- Use the landscape orientation when scanning an embossed card. If the scanning fails, place the card upside
down, and then try again.
*6: Available only by using Mixed Batch Card Guide
- Set the card in landscape orientation.
The card set on the Mixed Batch Card Guide is fed after completing the paper document scanning.
Scanning Condition
Capacity
Documents
on the Feed Tray
Cards
on the Feed Tray
Cards
on Mixed Batch Card Guide
Paper Only
50 sheets *1
—
—
Card Only
—
3 cards *2 *5
—
Mixed scanning
(Paper and Card)
20 sheets *3 *4
—
3 cards *2 *5 *6
15
6 SECTIONAL VIEWS
6.1.
CIS and Motor
6.2.
Rollers
CIS(B)
CIS(F)
Conveyor Moter
Paper Feed Roller
Conveyor Roller
Exit Roller
Free Roller
DFP Roller
16
6.3.
Boards and Sensors
PANEL Board
PAPER SENSOR Board
Paper Sensor
Double Feed Detector
[Receive]
[Receive]
Double Feed Detector [Generate]
CONTROL Board
DOOR DETECTION Board
Door Detector
STARTING SENSOR Board
Starting Sensor
ULTRASONIC SENSOR(R) Board
ULTRASONIC SENSOR(G) Board
Feed Select
Sensor
Sensor
Click on the first or last page to see other KV-S1037 / KV-S1038 / KV-S1026C-M2 / KV-S1026C-J2 service manuals if exist.