Panasonic SA-XH10EE / SC-XH10EE Service Manual ▷ View online
45
10.3. Disassembly of Top Cabinet
Step 1 Remove 2 screws.
Step 2 Remove 3 screws.
Step 3 Slightly pull both sides of Top Cabinet as diagram
shown.
shown.
Step 4 Lift up back of Top Cabinet as arrow shown.
Step 5 Press location A in downward direction at Front Panel.
Step 5 Press location A in downward direction at Front Panel.
Step 6 Remove Top Cabinet as arrow shown.
Caution: Replace the Top Cabinet Insulator sheet if broken.
Ensure it is pasted properly on Top Cabinet as diagram
shown.
Ensure it is pasted properly on Top Cabinet as diagram
shown.
Caution: During assembling, ensure that the catches of
Top Cabinet is inserted into Front Panel properly.
Top Cabinet is inserted into Front Panel properly.
46
10.4. Disassembly of Rear Panel
• Refer to “Disassembly of Top Cabinet”
Step 1 Remove 8 screws.
Step 2 Release the tab of each side of the Rear Panel in the
direction of arrow.
direction of arrow.
Step 3 Remove Rear Panel.
10.5. Disassembly of Front Panel
Assembly
• Refer to “Disassembly of Top Cabinet”.
• Refer to (Step 1) to (Step 6) of item 10.8.
• Refer to (Step 1) to (Step 6) of item 10.8.
Step 1 Detach 5P wire at the connector (FP9001) on Backend
P.C.B..
Step 2 Detach 17P FFC at the connector (CN203) on Main
P.C.B..
Step 3 Lift up Himelons.
Caution: Replace the Himelon if it is torn.
Step 4 Lift up the wire clamper
P.C.B..
Step 2 Detach 17P FFC at the connector (CN203) on Main
P.C.B..
Step 3 Lift up Himelons.
Caution: Replace the Himelon if it is torn.
Step 4 Lift up the wire clamper
Step 5 Release the 2 tabs at each side of the Front Panel
Assembly in the direction of arrow.
Assembly in the direction of arrow.
47
Step 6 Release the 3 tabs at the bottom chassis.
Caution: Do not exert strong force when releasing the tabs.
Caution: Do not exert strong force when releasing the tabs.
Step 7 Remove Front Panel Assembly.
10.6. Disassembly of Panel P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Assembly”.
• Refer to “Disassembly of Front Panel Assembly”.
Step 1 Remove 5 screws.
Step 2 Remove 1 screw.
Step 2 Remove 1 screw.
Step 3 Release 3P wire from wall & ribs of Front Panel.
Caution: During assembling, ensure that 3P wire is prop-
erly dressed in between wall & ribs of Front Panel as dia-
gram shown.
Caution: During assembling, ensure that 3P wire is prop-
erly dressed in between wall & ribs of Front Panel as dia-
gram shown.
48
Step 4 Lift up Panel P.C.B..
Step 5 Remove Ground Spring.
Caution (1): Keep the Ground Spring in safe place, place it
back during assembling.
Caution (2): During assembling, ensure that Panel P.C.B. is
properly located and fully fixed onto Front Panel.
Step 5 Remove Ground Spring.
Caution (1): Keep the Ground Spring in safe place, place it
back during assembling.
Caution (2): During assembling, ensure that Panel P.C.B. is
properly located and fully fixed onto Front Panel.
Step 6 Desolder 3P Cable at the cable holder (H902) on Panel
P.C.B..
Step 7 Remove Panel P.C.B..
P.C.B..
Step 7 Remove Panel P.C.B..
Caution: During assembling, ensure that 5P wire & 17P
FFC are dressed as diagram shown.
FFC are dressed as diagram shown.
Click on the first or last page to see other SA-XH10EE / SC-XH10EE service manuals if exist.