Panasonic SA-XH10EE / SC-XH10EE Service Manual ▷ View online
53
Step 2 : Slide the tray out fully.
Step 3 : Release the catches & remove the tray.
Step 4 : Release the guide as shown & slide the Traverse Slide
Plate to the end.
Plate to the end.
Step 5 : Release the 24P FFC from the slot.
54
Step 6 : Lift the Traverse Unit by approximately 45
°
.
Step 7 : Slide out the traverse unit as arrow shown.
Caution : Avoid touching the surface of the traverse unit.
10.9.2.
Assembly of Traverse Unit
Step 1 : Release the guide as shown & slide the Traverse Slide
Plate to the end.
Plate to the end.
55
Step 2 : Slot the Traverse unit at approximately 45
°
into the
mecha chassis as arrow shown.
Step 3 : Ensure the Traverse Unit seated properly onto the
Groove.
Groove.
Step 4 : Slide Traverse Slide Plate to lock the Traverse Unit as
shown.
shown.
56
Step 5 : Slot the FFC onto the slot.
Caution : Ensure that the FFC are properly inserted into
the slots as shown.
Caution : Ensure that the FFC are properly inserted into
the slots as shown.
Step 6 Slide the Traverse Slide Plate unit it stop at the Guide.
Step 7 Slot the Tray into the Guides as picture shown.
Step 8 Ensure the Guides are align with the groove when slid-
ing the tray in.
ing the tray in.
Click on the first or last page to see other SA-XH10EE / SC-XH10EE service manuals if exist.