DOWNLOAD Panasonic SA-XH10EE / SC-XH10EE Service Manual ↓ Size: 8.03 MB | Pages: 127 in PDF or view online for FREE

49

Step 1 Remove 1 screw.

Step 2 Lift up Power Button P.C.B. as direction of arrow.

Step 3 Release 3P Wire from wall & ribs of Front Panel.
Caution: During assembling, ensure that 3P Wire is prop-
erly dressed in between wall & ribs of Front Panel as dia-
gram shown.

Step 4 Desolder 3P Wire at the cable holder (H901) on Power
Button P.C.B..
Step 5 Remove Power Button P.C.B..

50

• Refer to “Disassembly of Top Cabinet”

 
Step 1 Insert Paper Clip into the hole on the Bottom Chassis
Assembly.
Step 2 Push the Paper Clip in the direction of the arrow to eject
Tray. 

Step 3 Slide the Tray out fully as direction of arrow.

Step 4 Upset the Unit.
Step 5 Release 2 catches. 
Caution: During assembling, ensure that Tray Ornament is 
inserted & fully catched onto Tray.

Step 6 Remove Tray Ornament in the direction of arrow.

51

Step 7 Slide the Tray in fully.

Step 8 Detach 24P FFC at the connector (FP8531) on Backend
P.C.B..
Step 9 Detach 6P FFC at the connector (FP8251) on Backend
P.C.B..
Step 10 Detach 5P FFC at the connector (FP8252) on Backend
P.C.B..
Caution: During assembling, dress the 5P FFC under Rib A 
and behind Rib B properly.

Step 11 Remove 4 screws.

52

Step 12 Slightly lift up DVD Mechanism Unit (BRS1D).
Step 13 Remove the DVD Mechanism Unit (BRS1D) in the
direction of arrow.

Step 14 Attach a short pin to the 24P FFC of the DVD Mecha-
nism Unit (BRS1D).

• Refer to “Disassembly of DVD Mechanism Unit

1. When the optical pickup unit is defective, the overall

traverse unit needs replacement.

2. Please note that appropriate actions need to be taken to

prevent static damage.

Step 1 : Use a pin to slide the Traverse Slide Plate until it come
to a stop.