JBL SOUNDFLY BT (serv.man3) EMC - CB Certificate ▷ View online
ATTACHMENT 1
Nation Differences
( 22 / 28 )
Report No. : 12-1330-0056
TRF No. IEC60065K
13.3.1
General
– loudspeaker voice coil
Add t he f ollow ing af t er t he t hird paragraph:
CLEARANCES bet w een a loudspeaker voice
coil and adjacent conduct ive part s shall be
disregarded.
N/A
14.2
Capacitors and RC-units
14.2.1
(Y-Capacit ors)
Add t he f ollow ing paragraph:
Add t he f ollow ing paragraph:
As an alt ernat ive an isolat ing capacit or
complying w it h applicable requirement s of
CSA C22.2 No 1, shall be accept able f or
bridging BASIC or SUPPLEMENTARY
INSULATION.
complying w it h applicable requirement s of
CSA C22.2 No 1, shall be accept able f or
bridging BASIC or SUPPLEMENTARY
INSULATION.
P
14.2.2
(X-Capacit ors)
Add t he f ollow ing paragraph:
Add t he f ollow ing paragraph:
As an alt ernat ive an across-line capacit or
complying w it h applicable requirement s of
CSA C22.2 No 1, shall be accept able.
complying w it h applicable requirement s of
CSA C22.2 No 1, shall be accept able.
P
14.5.1.
2
2
Thermal releases
Add t he f ollow ing paragraph:
Add t he f ollow ing paragraph:
As an alt ernat ive a THERMAL LINK complying
w it h CSA C22.2 No 209 shall be accept able.
w it h CSA C22.2 No 209 shall be accept able.
Considered
P
14.5.2
Fuse-links and fuse holders
14.5.2.
1
1
Add t he f ollow ing paragraph:
As an alt ernat ive, a f use-link complying w it h
CSA C22.2 No 248.14 shall be accept able.
CSA C22.2 No 248.14 shall be accept able.
N/A
14.5.2.
4
4
Add t he f ollow ing paragraph:
As an alt ernat ive a Fuseholder Assembly
complying w it h CSA C22.2 No 39 shall be
accept able.
complying w it h CSA C22.2 No 39 shall be
accept able.
N/A
14.6
Switches
14.6.1
t o
14.6.5
t o
14.6.5
Add t he f ollow ing t o each of t he Clauses:
As an alt ernat ive, a TV-Rat ed Sw it ch
complying w it h CSA C22.2 No 1 -98, Cl 9
shall be accept able.
complying w it h CSA C22.2 No 1 -98, Cl 9
shall be accept able.
N/A
14.11
Optocouplers
Add t he f ollow ing paragraph:
Add t he f ollow ing paragraph:
As an alt ernat ive, an opt ocoupler complying
w it h CSA C22.2 No. 1 shall be accept able.
w it h CSA C22.2 No. 1 shall be accept able.
P
14.12
Surge suppression varistors
Add t he f ollow ing paragraph:
Add t he f ollow ing paragraph:
As an alt ernat ive, a varist or complying w it h
CSA C22.2 No. 1 shall be accept able.
CSA C22.2 No. 1 shall be accept able.
No varist or.
N/A
ATTACHMENT 1
Nation Differences
( 23 / 28 )
Report No. : 12-1330-0056
TRF No. IEC60065K
14.12A
Gas discharge tubes
Add New Clause 14.12A:
Gas discharge t ubes complying w it h t he
f ollow ing t est s may be connect ed t o bridge
BASIC or REINFORCED INSULATION.
Ten samples of gas discharge t ubes isolat ing
t he ac supply f rom exposed part s shall be
subject ed t o t he varist or pulse t est s of Clause
14.12. Follow ing t he pulses, t he device shall
be allow ed t o ret urn t o room t emperat ure.
The dielect ric breakdow n volt age of t he gas
t ube shall not decrease by more t han 50%
and t he gas discharge t ube shall comply w it h
t he elect ric st rengt h t est of Clause 10.3, w it h
t he t est volt age reduced t o t w ice t he mains
volt age.
Add New Clause 14.12A:
Gas discharge t ubes complying w it h t he
f ollow ing t est s may be connect ed t o bridge
BASIC or REINFORCED INSULATION.
Ten samples of gas discharge t ubes isolat ing
t he ac supply f rom exposed part s shall be
subject ed t o t he varist or pulse t est s of Clause
14.12. Follow ing t he pulses, t he device shall
be allow ed t o ret urn t o room t emperat ure.
The dielect ric breakdow n volt age of t he gas
t ube shall not decrease by more t han 50%
and t he gas discharge t ube shall comply w it h
t he elect ric st rengt h t est of Clause 10.3, w it h
t he t est volt age reduced t o t w ice t he mains
volt age.
No gas t ube.
N/A
15.1
Plugs and sockets
15.1.1
(Convenience Recept acle Type)
Add t he Follow ing Clause:
Add t he Follow ing Clause:
A recept acle provided f or general purpose
mains out put shall comply w it h t he
requirement s of CSA St andard C22.2 No 42
(dimensional requirement s are also specif ied
in IEC 60906-2). The at t achment plug cap
shall be polarized t ype w hen t he apparat us is
provided w it h a manually operat ed, MAINS
connect ed single pole sw it ch f or apparat us
on-of f operat ion, a socket screw shell
lampholder, or a 15 or 20 A socket out let .
mains out put shall comply w it h t he
requirement s of CSA St andard C22.2 No 42
(dimensional requirement s are also specif ied
in IEC 60906-2). The at t achment plug cap
shall be polarized t ype w hen t he apparat us is
provided w it h a manually operat ed, MAINS
connect ed single pole sw it ch f or apparat us
on-of f operat ion, a socket screw shell
lampholder, or a 15 or 20 A socket out let .
No socket out let .
N/A
15.1.2
(Audio Terminals)
Add t he f ollow ing paragraph:
Add t he f ollow ing paragraph:
Banana plugs shall be accept able.
No banana plugs.
N/A
15.1.3
Adapter output connectors
Replace t he f irst paragraph w it h t he f ollow ing:
Replace t he f irst paragraph w it h t he f ollow ing:
Terminals and connect ors used in out put
circuit s of supply apparat us, w hose out put is
not a st andard nominal mains volt age
according t o IEC 60038, Table 1, shall not be
compat ible w it h t hose specif ied f or household
and similar general purposes, f or example
t hose described in IEC 60083[1], IEC 60320,
IEC 60884, IEC 60906 (part s 1, 2, and 3),
and CSA C22.2 No 42.
circuit s of supply apparat us, w hose out put is
not a st andard nominal mains volt age
according t o IEC 60038, Table 1, shall not be
compat ible w it h t hose specif ied f or household
and similar general purposes, f or example
t hose described in IEC 60083[1], IEC 60320,
IEC 60884, IEC 60906 (part s 1, 2, and 3),
and CSA C22.2 No 42.
No mains out put .
N/A
15.2
Provisions for protective earthing - Bond
Impedance
Replace t he t hird paragraph w it h t he
f ollow ing:
Impedance
Replace t he t hird paragraph w it h t he
f ollow ing:
Eart hing connect ions shall comply w it h t he
N/A
ATTACHMENT 1
Nation Differences
( 24 / 28 )
Report No. : 12-1330-0056
TRF No. IEC60065K
t est requirement s of CSA C22.2 No 0.4.
15.3
Terminals for external flexible cords and permanent connections to the mains supply
15.3.1
A
A
(Permanent Wiring)
Add t he f ollow ing clauses:
Add t he f ollow ing clauses:
Equipment int ended f or permanent connect ion
t o t he mains shall have provisions f or
connect ion t o t he w iring syst em in
accordance w it h t he Canadian Elect rical Code,
Part I.
t o t he mains shall have provisions f or
connect ion t o t he w iring syst em in
accordance w it h t he Canadian Elect rical Code,
Part I.
N/A
The t erminal part s and all ot her provisions f or
permanent connect ion t o f ixed w iring shall
comply w it h CSA St andard CAN/CSA -C22.2
No 0.
permanent connect ion t o f ixed w iring shall
comply w it h CSA St andard CAN/CSA -C22.2
No 0.
N/A
15.4.2
(Mains Plugs
– Type)
Add t he f ollow ing paragraphs:
Mains plugs of non-permanent ly inst alled
equipment shall comply w it h:
Mains plugs of non-permanent ly inst alled
equipment shall comply w it h:
a)
CSA C22.2 No 21 for moulded-on type
attachment plugs; and
b)
b)
CSA C22.2 No 42 for disassembly type
attachment plugs (dimensional requirements
are also specified in IEC 60906-2).
are also specified in IEC 60906-2).
P
Class II equipment provided w it h a general
purpose mains out let , or lampholder, shall be
provided w it h a polarized-t ype plug.
purpose mains out let , or lampholder, shall be
provided w it h a polarized-t ype plug.
P
If t he plug is a polarized t ype, single pole
sw it ches or over current prot ect ors shall not
be connect ed in t he ident if ied conduct or.
sw it ches or over current prot ect ors shall not
be connect ed in t he ident if ied conduct or.
P
16
External flexible cords
16.1
Replace t his clause w it h t he f ollow ing:
Flexible cord used f or mains supply shall
comply w it h t he requirement s of CSA C22.2
No 49. The cord t ype shall be in accordance
w it h Table 4 of CSA C22.2 No 1.
comply w it h t he requirement s of CSA C22.2
No 49. The cord t ype shall be in accordance
w it h Table 4 of CSA C22.2 No 1.
The at t achment plug shall be rat ed not less
t han 125% of t he apparat us rat ed current .
t han 125% of t he apparat us rat ed current .
Cord set s shall comply w it h t he requirement s
of CSA C22.2 No 21.
of CSA C22.2 No 21.
Non-det achable f lexible cables and cords of
Class I apparat us shall be provided w it h a
green/yellow core connect ed t o t he prot ect ive
eart hing t erminal of t he apparat us and, if a
plug is provided, t o t he prot ect ive eart hing
cont act of t he plug.
Class I apparat us shall be provided w it h a
green/yellow core connect ed t o t he prot ect ive
eart hing t erminal of t he apparat us and, if a
plug is provided, t o t he prot ect ive eart hing
cont act of t he plug.
Compliance is checked by inspect ion.
Not e: The colour of cores of f lexible mains
CSA Cert if ied. Plug rat ed 10
A.
A.
P
ATTACHMENT 1
Nation Differences
( 25 / 28 )
Report No. : 12-1330-0056
TRF No. IEC60065K
cords is cont ained in IEC 60173[4].
17.9A
Adhesive securement and conductive coatings
17.9A.
1
1
Add t he f ollow ing clause:
Adhesive securement
Adhesive securement
The f ollow ing part s, t he displacement of
w hich may result in a f ire or shock hazard,
shall not be secured solely by adhesive,
unless t he adhesive syst em complies w it h t he
resist ance t o ext ernal f orces t est of Clause
9.1.7, t he bump t est of Clause 12.1.1, and
t he impact t est of Clause 12.1.3, af t er
condit ioning in accordance w it h Clause
17.9A.2:
w hich may result in a f ire or shock hazard,
shall not be secured solely by adhesive,
unless t he adhesive syst em complies w it h t he
resist ance t o ext ernal f orces t est of Clause
9.1.7, t he bump t est of Clause 12.1.1, and
t he impact t est of Clause 12.1.3, af t er
condit ioning in accordance w it h Clause
17.9A.2:
a) int ernal met al part s/conduct ive coat ings;
b) barriers; and
c) required enclosure part s.
b) barriers; and
c) required enclosure part s.
Not e: Cat hode ray t ubes are excluded f rom
t his t est .
t his t est .
Adhesives/Conduct ive
coat ing not used.
coat ing not used.
N/A
17.9A.
2
2
Adhesive and conductive coating securement conditioning
17.9A.
2.1
2.1
General:
Where required by Clause 17.9A.1, one
sample of t he apparat us or enclosure sect ion
shall be condit ioned in accordance w it h t he
requirement s of Clause 17.9A.2.2.
Equivalent ageing t est dat a supplied by t he
manuf act urer w ill be considered in lieu of
ageing.
sample of t he apparat us or enclosure sect ion
shall be condit ioned in accordance w it h t he
requirement s of Clause 17.9A.2.2.
Equivalent ageing t est dat a supplied by t he
manuf act urer w ill be considered in lieu of
ageing.
N/A
17.9A.2.
2
Ageing
Day 1: Place in oven at 100 ± 1ºC f or 1
w eek, or 82 ± 1ºC f or 8 w eeks at t he
manufacturer’ s option.
Day 1: Place in oven at 100 ± 1ºC f or 1
w eek, or 82 ± 1ºC f or 8 w eeks at t he
manufacturer’ s option.
Day 8 or Day 57:
1. Remove f rom oven and leave at room
t emperat ure f or 1 h.
2. Place in f reezer at
1. Remove f rom oven and leave at room
t emperat ure f or 1 h.
2. Place in f reezer at
–35ºC for 2 h.
3. Remove f rom f reezer and allow t o reach
room t emperat ure overnight .
Day 9 or Day 58:
1. Place in a compart ment at 96% relat ive
humidit y f or 3 h.
2. Remove and leave at room t emperat ure
and humidit y f or 1 h.
3. Place in over at a t emperat ure select ed in
t he f irst cycle f or 3 h.
4. Remove and allow t o come t o room
t emperat ure overnight .
room t emperat ure overnight .
Day 9 or Day 58:
1. Place in a compart ment at 96% relat ive
humidit y f or 3 h.
2. Remove and leave at room t emperat ure
and humidit y f or 1 h.
3. Place in over at a t emperat ure select ed in
t he f irst cycle f or 3 h.
4. Remove and allow t o come t o room
t emperat ure overnight .
N/A
Click on the first or last page to see other SOUNDFLY BT (serv.man3) service manuals if exist.