DOWNLOAD JBL ON BEAT XTREME (serv.man8) Service Manual ↓ Size: 2.54 MB | Pages: 126 in PDF or view online for FREE

 

Page 8 of 12

 

Report No.: 171153

 

 

 

 

 

 

 

ATTACHMENT 7 

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 

Replacement: 

Replace the paragraph after NOTE 2 by the 
following. 

MAINS socket-outlets and interconnection couplers 
mounted on CLASS 0I and CLASS II apparatus 
shall not permit connection of CLASS I apparatus. 

No mains socket-outlets

 

Replacement: 

Replace the paragraph before NOTE 3 by the 
following. 

MAINS socket-outlets and interconnection couplers 
mounted on CLASS I apparatus shall be provided 
with protective earthing contacts which are reliably 
connected to the PROTECTIVE EARTHING 
TERMINAL or contact of the apparatus. If not, it 
shall not permit connection of CLASS I apparatus. 

Class II apparatus 

Replacement: 

Replace NOTE 4 by the following. 

NOTE 4  Socket-outlets not allowing the 
connection of CLASS I apparatus can be designed, 
for instance, similar to IEC 60906-1, standard 
sheets 3-1 or 3-2, or according to IEC 60320-2-2, 
standard sheets D or H. 

 

15.1.2 Deletion: 

Delete the following sentence in NOTE.  

An example of a connector not meeting the 
requirements of this sub clause is the so-called 
"banana" plug. 

 

— 

15.1.3 Replacement: 

Replace the references, “IEC 60083 [1], IEC 
60320, IEC 60884, IEC 60906” by “JIS C 8282 
(corresponding to IEC 60884), JIS C 8303, IEC 
60320 and IEC 60906”. 

 

15.2 Addition: 

Add “and CLASS 0I EQUIPMENT” after the words, 
“CLASS I EQUIPMENT” 

Class II apparatus

 

 

Page 9 of 12

 

Report No.: 171153

 

 

 

 

 

 

 

ATTACHMENT 7 

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 

Addition: 

Add the following paragraphs after the first 
paragraph. 

The external earth wire of plug with an external 
earth wire shall not be earthed by a clip. 

Rated voltage of plug with an protective external 
earth wire shall be less 150 Vac. 

 

Deletion: 

Delete the following paragraph. 

In supply apparatus of Class I with non-hazardous 
live output voltage, output circuits shall not be 
connected to the protective earthing conductor. 

 

Replacement: 

In the first paragraph, replace IEC 60998-2-2 by 
“ IEC 60998-2-2 or JIS C 2814-2-2:2001”. 

Apparatus is not for 
permanent connection. 

Replacement: 

In the first paragraph, replace IEC 60999 by IEC 
60999-1. 

 

Replacement: 

In the third paragraph, replace IEC 60335-1 by JIS 
C 9335-1:2003 (corresponding to IEC 60335-1). 

 

15.3.3 Replacement: 

Replace “ISO 261 or ISO 262” by “JIS B 0205-
2:2001 or JIS B 0205-3:2001”. 

Appliance inlet provided 

 

Page 10 of 12

 

Report No.: 171153

 

 

 

 

 

 

 

ATTACHMENT 7 

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 

15.3.5 Replacement: 

In the second paragraph, replace IEC 60950 by JIS 
C 6950:2006. 

 

— 

Replacement: 

Replace Table 15 by the following. 

Comply

 

RATED CURRENT 
CONSUMPTION of 

the apparatus 

a 

A 

Nominal cross-

sectional area 

mm

2

 

 
 
 
 

  Up to and including 6 

0.75 to 1 

Over 6 up to and 

including 10 

1 to 1.5 

Over 10 up to and 

including 16 

1.5 to 2.5 

a 

 The RATED CURRENT CONSUMPTION 

includes currents which can be drawn from 
socket-outlets providing MAINS power for 
other apparatus. 

15.3.9 Addition: 

Add the following to the last of the first paragraph. 

This does not apply to CLASS 0I EQUIPMENT with 
a protection earthing terminal separately. 

 

15.4.1 Replacement: 

In NOTE 1, replace IEC 60884-1 by JIS C 8282 
(corresponding to IEC 60884-1). 

The apparatus is not a  
device forming a part of the 
mains plug. 

 Replacement: 

In NOTE 2, replace IEC 60083 [1] by JIS C 8303. 

 

15.4.2 Replacement: 

In NOTE, replace IEC 60083 [1] by JIS C 
8303:1993 [1]. 

 

15.4.3 Addition: 

Add the following NOTE to Table 17. 

NOTE  If mains plug is parallel blade, a pull force 
as given in  “Over 10 A up to and including 16 A, 
130/250 V” of Table 17 is applied. 

 

 

 

Page 11 of 12

 

Report No.: 171153

 

 

 

 

 

 

 

ATTACHMENT 7 

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 

Addition: 

Add the following to the last of first paragraph. 

Or mains cords shall be of the sheathed type 
complying with Appendix 1 of Article 1 of the 
Ministerial Ordinance on stipulating technical 
requirements for the Electrical Appliance..  

Deletion: 

Delete NOTE 1. 

Replacement: 

Compliance is checked by testing MAINS supply 
flexible cords in accordance with JIS C 3662 
(corresponding to IEC60227) or JIS C 3663 
(corresponding to IEC 60245) or Appendix 1 of 
Article 1 of the Ministerial Ordinance on stipulating 
technical requirements for the Electrical Appliance.  

Comply 

In this sub-clause, replace IEC 60227 by JIS C 
3662 (corresponding to IEC 60227). 

In this sub-clause, replace IEC 60245 by JIS C 
3663 (corresponding to IEC 60245). 

 

Addition: 

Add the following paragraph after the third 
paragraph. 

An external earth wire of Class 0I equipment shall 
be green/yellow, and the length of the earth wire 
from the plug shall be equal or more than 10 cm. 

Class II apparatus 

Replacement: 

Replace the first paragraph by the following. 
Power supply cord conductors complied with JIS C 
3662 (corresponding to IEC 60227) or JIS C 3663 
(corresponding to IEC 60245) shall have a nominal 
cross-sectional area not less than those shown in 
table 18. If power supply cord conductors comply 
with other standards, it shall comply with relevant 
wiring requirements.

The cord is 0.75mm²,  
within the current rating.