JBL ON BEAT RUMBLE EMC - CB Certificate ▷ View online
Issue Date:
2013-01-09
Page 21 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
2.10.5.13
Wire with solvent-based enamel in wound
components
components
N/A
Electric strength test ................................. :
-
Routine test
N/A
2.10.5.14
Additional insulation in wound components
N/A
Working voltage ....................................... :
N/A
- Basic insulation not under stress ........... :
N/A
- Supplementary, reinforced insulation ..... :
N/A
2.10.6
Construction of printed boards
N/A
2.10.6.1
Uncoated printed boards
N/A
2.10.6.2
Coated printed boards
N/A
2.10.6.3
Insulation between conductors on the same inner
surface of a printed board
surface of a printed board
N/A
2.10.6.4
Insulation between conductors on different layers
of a printed board
of a printed board
N/A
Distance through insulation
N/A
Number of insulation layers (pcs) ............. :
N/A
2.10.7
Component external terminations
N/A
2.10.8
Tests on coated printed boards and coated
components
components
N/A
2.10.8.1
Sample preparation and preliminary inspection
N/A
2.10.8.2
Thermal conditioning
N/A
2.10.8.3
Electric strength test
N/A
2.10.8.4
Abrasion resistance test
N/A
2.10.9
Thermal cycling
N/A
2.10.10
Test for Pollution Degree 1 environment and
insulating compound
insulating compound
N/A
2.10.11
Tests for semiconductor devices and cemented
joints
joints
N/A
2.10.12
Enclosed and sealed parts
N/A
Issue Date:
2013-01-09
Page 22 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
3
WIRING, CONNECTIONS AND SUPPLY
Pass
3.1
General
Pass
3.1.1
Current rating and overcurrent protection
N/A
3.1.2
Protection against mechanical damage
Wires are routed away from
sharp edges and parts which
could damage insulation.
sharp edges and parts which
could damage insulation.
Pass
3.1.3
Securing of internal wiring
Pass
3.1.4
Insulation of conductors
N/A
3.1.5
Beads and ceramic insulators
N/A
3.1.6
Screws for electrical contact pressure
N/A
3.1.7
Insulating materials in electrical connections
N/A
3.1.8
Self-tapping and spaced thread screws
N/A
3.1.9
Termination of conductors
N/A
10 N pull test
N/A
3.1.10
Sleeving on wiring
N/A
Issue Date:
2013-01-09
Page 23 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
3.2
Connection to mains supply
N/A
3.2.1
Means of connection
Not direct connect to the
Mains.
Mains.
N/A
3.2.1.1
Connection to an a.c. mains supply
N/A
3.2.1.2
Connection to a d.c. mains supply
N/A
3.2.2
Multiple supply connections
N/A
3.2.3
Permanently connected equipment
N/A
Number of conductors, diameter of cable
and conduits (mm) ................................... :
and conduits (mm) ................................... :
-
3.2.4
Appliance inlets
N/A
3.2.5
Power supply cords
Power supply cord suitable for
application and subject to
country's national code and
regulations to be provided by
the manufacturer.
application and subject to
country's national code and
regulations to be provided by
the manufacturer.
N/A
3.2.5.1
AC power supply cords
N/A
Type ......................................................... :
-
Rated current (A), cross-sectional area
(mm²), AWG ............................................. :
(mm²), AWG ............................................. :
-
3.2.5.2
DC power supply cords
N/A
3.2.6
Cord anchorages and strain relief
N/A
Mass of equipment (kg), pull (N) .............. :
-
Longitudinal displacement (mm) .............. :
-
3.2.7
Protection against mechanical damage
N/A
3.2.8
Cord guards
N/A
Diameter of minor dimension D (mm); test
mass (g) ................................................... :
mass (g) ................................................... :
-
Radius of curvature of cord (mm) ............. :
-
3.2.9
Supply wiring space
N/A
Issue Date:
2013-01-09
Page 24 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
3.3
Wiring terminals for connection of external conductors
N/A
3.3.1
Wiring terminals
Class III equipment, no wiring
terminal provided.
terminal provided.
N/A
3.3.2
Connection of non-detachable power supply cords
N/A
3.3.3
Screw terminals
N/A
3.3.4
Conductor sizes to be connected
N/A
Rated current (A), cord/cable type, cross-
sectional area (mm²) ................................ :
sectional area (mm²) ................................ :
-
3.3.5
Wiring terminal sizes
N/A
Rated current (A), type and nominal thread
diameter (mm) .......................................... :
diameter (mm) .......................................... :
-
3.3.6
Wiring terminals design
N/A
3.3.7
Grouping of wiring terminals
N/A
3.3.8
Stranded wire
N/A
3.4
Disconnection from the mains supply
N/A
3.4.1
General requirement
Class III equipment, not
directly connect to mains.
directly connect to mains.
N/A
3.4.2
Disconnect devices
N/A
3.4.3
Permanently connected equipment
N/A
3.4.4
Parts which remain energized
N/A
3.4.5
Switches in flexible cords
N/A
3.4.6
Number of poles - single-phase and d.c. equipment
N/A
3.4.7
Number of poles - three-phase equipment
N/A
3.4.8
Switches as disconnect devices
N/A
3.4.9
Plugs as disconnect devices
N/A
3.4.10
Interconnected equipment
N/A
3.4.11
Multiple power sources
N/A
Click on the first or last page to see other ON BEAT RUMBLE service manuals if exist.