JBL ON BEAT RUMBLE EMC - CB Certificate ▷ View online
Issue Date:
2013-01-09
Page 25 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
3.5
Interconnection of equipment
Pass
3.5.1
General requirements
Pass
3.5.2
Types of interconnection circuits .............. :
Interconnection circuits are
SELV/LPS Circuits
SELV/LPS Circuits
Pass
3.5.3
ELV circuits as interconnection circuits
No ELV interconnections.
N/A
3.5.4
Data ports for additional equipment
USB and dock terminal are
complying with LPS.
complying with LPS.
Pass
4
PHYSICAL REQUIREMENTS
Pass
4.1
Stability
N/A
Angle of 10°
N/A
Test force (N) ........................................... :
N/A
Issue Date:
2013-01-09
Page 26 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
4.2
Mechanical strength
N/A
4.2.1
General
Equipment is supplied by
external SELV/LPS adaptor.
external SELV/LPS adaptor.
N/A
Rack-mounted equipment
N/A
4.2.2
Steady force test, 10 N
N/A
4.2.3
Steady force test, 30 N
N/A
4.2.4
Steady force test, 250 N
N/A
4.2.5
Impact test
N/A
Fall test
N/A
Swing test
N/A
4.2.6
Drop test; height (mm).............................. :
N/A
4.2.7
Stress relief test
N/A
4.2.8
Cathode ray tubes
N/A
Picture tube separately certified ............... :
N/A
4.2.9
High pressure lamps
N/A
4.2.10
Wall or ceiling mounted equipment; force
(N) ............................................................ :
(N) ............................................................ :
N/A
4.2.11
Rotating solid media
N/A
Test to cover on the door ......................... :
N/A
Issue Date:
2013-01-09
Page 27 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
4.3
Design and construction
Pass
4.3.1
Edges and corners
All edges and corners are
sufficiently rounded so as not
to constitute a hazard.
sufficiently rounded so as not
to constitute a hazard.
Pass
4.3.2
Handles and manual controls; force (N) ... :
N/A
4.3.3
Adjustable controls
N/A
4.3.4
Securing of parts
N/A
4.3.5
Connection by plugs and sockets
N/A
4.3.6
Direct plug-in equipment
N/A
Torque ...................................................... :
N/A
Compliance with the relevant mains plug
standard ................................................... :
standard ................................................... :
N/A
4.3.7
Heating elements in earthed equipment
N/A
4.3.8
Batteries
N/A
- Overcharging of a rechargeable battery
N/A
- Unintentional charging of a non-rechargeable
battery
battery
N/A
- Reverse charging of a rechargeable battery
N/A
- Excessive discharging rate for any battery
N/A
4.3.9
Oil and grease
N/A
4.3.10
Dust, powders, liquids and gases
N/A
4.3.11
Containers for liquids or gases
N/A
4.3.12
Flammable liquids .................................... :
N/A
Quantity of liquid (l) .................................. :
N/A
Flash point (°C) ........................................ :
N/A
4.3.13
Radiation
No radiation hazard.
Pass
4.3.13.1
General
N/A
4.3.13.2
Ionizing radiation
N/A
Measured radiation (pA/kg) ...................... :
-
Measured high-voltage (kV) ..................... :
-
Measured focus voltage (kV) .................... :
-
Issue Date:
2013-01-09
Page 28 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
CRT markings .......................................... :
-
4.3.13.3
Effect of ultraviolet (UV) radiation on materials
N/A
Part, property, retention after test,
flammability classification ......................... :
flammability classification ......................... :
N/A
4.3.13.4 Human exposure to ultraviolet (UV)
radiation ................................................... :
N/A
4.3.13.5
Lasers (including laser diodes) and LEDs
This product contains only
visible indicator LEDs (Class
1) operating in the range of
400 - 710 nm wavelength.
Indicating LEDs are low power
and did not require evaluation
to IEC 62471.
visible indicator LEDs (Class
1) operating in the range of
400 - 710 nm wavelength.
Indicating LEDs are low power
and did not require evaluation
to IEC 62471.
N/A
4.3.13.5.
1
1
Lasers (including laser diodes)
N/A
Laser class ............................................... :
(For indicator LEDs, see above
statement.)
statement.)
-
4.3.13.5.
2
2
Light emitting diodes (LEDs)
Low power LED's exempt from
IEC 62471 evaluation
IEC 62471 evaluation
N/A
4.3.13.6 Other types ............................................... :
N/A
Click on the first or last page to see other ON BEAT RUMBLE service manuals if exist.