JBL ON BEAT RUMBLE EMC - CB Certificate ▷ View online
Issue Date:
2013-01-09
Page 29 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
4.4
Protection against hazardous moving parts
N/A
4.4.1
General
No moving parts.
N/A
4.4.2
Protection in operator access areas ......... :
N/A
Household and home/office document/media
shredders
shredders
N/A
4.4.3
Protection in restricted access locations .. :
N/A
4.4.4
Protection in service access areas
N/A
4.4.5
Protection against moving fan blades
N/A
4.4.5.1
General
N/A
Not considered to cause pain or injury. a) :
N/A
Is considered to cause pain, not injury. b) :
N/A
Considered to cause injury. c) .................. :
N/A
4.4.5.2
Protection for users
N/A
Use of symbol or warning ......................... :
N/A
4.4.5.3
Protection for service persons
N/A
Use of symbol or warning ......................... :
N/A
4.5
Thermal requirements
Pass
4.5.1
General
Pass
4.5.2
Temperature tests
(See appended table 4.5)
The equipment and its
component parts did not attain
excessive temperatures during
normal operation.
The equipment and its
component parts did not attain
excessive temperatures during
normal operation.
Pass
Normal load condition per Annex L .......... :
Operated in the most
unfavorable way of operation
given in the operating
instructions until steady
conditions established.
unfavorable way of operation
given in the operating
instructions until steady
conditions established.
-
4.5.3
Temperature limits for materials
Pass
4.5.4
Touch temperature limits
Pass
4.5.5
Resistance to abnormal heat .................... :
N/A
Issue Date:
2013-01-09
Page 30 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
4.6
Openings in enclosures
N/A
4.6.1
Top and side openings
N/A
Dimensions (mm) ..................................... :
-
4.6.2
Bottoms of fire enclosures
N/A
Construction of the bottom, dimensions
(mm) ......................................................... :
(mm) ......................................................... :
-
4.6.3
Doors or covers in fire enclosures
N/A
4.6.4
Openings in transportable equipment
N/A
4.6.4.1
Constructional design measures
N/A
Dimensions (mm) ..................................... :
-
4.6.4.2
Evaluation measures for larger openings
N/A
4.6.4.3
Use of metallized parts
N/A
4.6.5
Adhesives for constructional purposes
N/A
Conditioning temperature (°C), time
(weeks) ..................................................... :
(weeks) ..................................................... :
-
Issue Date:
2013-01-09
Page 31 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
4.7
Resistance to fire
Pass
4.7.1
Reducing the risk of ignition and spread of flame
Use of materials with the
required flammability classes.
required flammability classes.
Pass
Method 1, selection and application of components
wiring and materials
wiring and materials
Pass
Method 2, application of all of simulated fault
condition tests
condition tests
N/A
4.7.2
Conditions for a fire enclosure
Pass
4.7.2.1
Parts requiring a fire enclosure
N/A
4.7.2.2
Parts not requiring a fire enclosure
PWB minimum V-1.
Pass
4.7.3
Materials
Pass
4.7.3.1
General
Pass
4.7.3.2
Materials for fire enclosures
N/A
4.7.3.3
Materials for components and other parts outside
fire enclosures
fire enclosures
PWB minimum V-1. Enclosure
min. HB
min. HB
Pass
4.7.3.4
Materials for components and other parts inside fire
enclosures
enclosures
N/A
4.7.3.5
Materials for air filter assemblies
N/A
4.7.3.6
Materials used in high-voltage components
N/A
Issue Date:
2013-01-09
Page 32 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
5
ELECTRICAL REQUIREMENTS AND SIMULATED ABNORMAL CONDITIONS
Pass
5.1
Touch current and protective conductor current
N/A
5.1.1
General
Unit supplied by SELV circuits.
N/A
5.1.2
Configuration of equipment under test (EUT)
N/A
5.1.2.1
Single connection to an a.c. mains supply
N/A
5.1.2.2
Redundant multiple connections to an a.c. mains
supply
supply
N/A
5.1.2.3
Simultaneous multiple connections to an a.c. mains
supply
supply
N/A
5.1.3
Test circuit
N/A
5.1.4
Application of measuring instrument
N/A
5.1.5
Test procedure
N/A
5.1.6
Test measurements
N/A
Supply voltage (V) .................................... :
-
Measured touch current (mA) ................... :
-
Max. allowed touch current (mA) .............. :
-
Measured protective conductor current
(mA) ......................................................... :
(mA) ......................................................... :
-
Max. allowed protective conductor current
(mA) ......................................................... :
(mA) ......................................................... :
-
5.1.7
Equipment with touch current exceeding 3,5 mA
N/A
5.1.7.1
General .................................................... :
N/A
5.1.7.2
Simultaneous multiple connections to the supply
N/A
5.1.8
Touch currents to telecommunication networks and
cable distribution systems and from
telecommunication networks
cable distribution systems and from
telecommunication networks
N/A
5.1.8.1
Limitation of the touch current to a
telecommunication network or to a cable
distribution system
telecommunication network or to a cable
distribution system
N/A
Supply voltage (V) .................................... :
-
Measured touch current (mA) ................... :
-
Max. allowed touch current (mA) .............. :
-
5.1.8.2
Summation of touch currents from
N/A
Click on the first or last page to see other ON BEAT RUMBLE service manuals if exist.