Harman Kardon GO PLAY MICRO (serv.man2) EMC - CB Certificate ▷ View online
Page 24 of 58
Report No. 15039146 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
5.3.7
Simulation of faults
(See appended table 5.3)
P
5.3.8
Unattended equipment
N/A
5.3.9
Compliance criteria for abnormal operating and
fault conditions
fault conditions
(See appended table 5.3)
P
5.3.9.1
During the tests
No fire propagated beyond the
equipment, no molten metal
emitted and no deformation of
enclosure.
equipment, no molten metal
emitted and no deformation of
enclosure.
P
5.3.9.2
After the tests
No emission of molten metal,
no fire occurred.
no fire occurred.
P
6
CONNECTION TO TELECOMMUNICATION
NETWORKS
NETWORKS
N/A
6.1
Protection of telecommunication network service
persons, and users of other equipment connected
to the network, from hazards in the equipment
persons, and users of other equipment connected
to the network, from hazards in the equipment
N/A
6.1.1
Protection from hazardous voltages
N/A
6.1.2
Separation of the telecommunication network from
earth
earth
N/A
6.1.2.1
Requirements
N/A
Supply voltage (V) .................................................:
Current in the test circuit (mA) ............................:
6.1.2.2
Exclusions .............................................................:
N/A
6.2
Protection of equipment users from overvoltages on telecommunication
networks
networks
N/A
6.2.1
Separation requirements
N/A
6.2.2
Electric strength test procedure
N/A
6.2.2.1
Impulse test
(see appended table 5.2)
N/A
6.2.2.2
Steady-state test
(see appended table 5.2)
N/A
6.2.2.3
Compliance criteria
N/A
6.3
Protection of the telecommunication wiring system from overheating
N/A
Max. output current (A) .........................................:
Current limiting method .........................................:
7
CONNECTION TO CABLE DISTRIBUTION SYSTEMS
N/A
7.1
General
N/A
Page 25 of 58
Report No. 15039146 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
7.2
Protection of cable distribution system service
persons, and users of other equipment connected
to the system, from hazardous voltages in the
equipment
persons, and users of other equipment connected
to the system, from hazardous voltages in the
equipment
N/A
7.3
Protection of equipment users from overvoltages on
the cable distribution system
the cable distribution system
N/A
7.4
Insulation between primary circuits and cable
distribution systems
distribution systems
N/A
7.4.1
General
N/A
7.4.2
Voltage surge test
(see appended table 5.2)
N/A
7.4.3
Impulse test
(see appended table 5.2)
N/A
A
ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
A.1
Flammability test for fire enclosures of movable
equipment having a total mass exceeding 18 kg,
and of stationary equipment (see 4.7.3.2)
equipment having a total mass exceeding 18 kg,
and of stationary equipment (see 4.7.3.2)
N/A
A.1.1
Samples.................................................................:
Wall thickness (mm) ..............................................:
A.1.2
Conditioning of samples; temperature (
°
C) ..........:
N/A
A.1.3
Mounting of samples ............................................:
N/A
A.1.4
Test flame (see IEC 60695-11-3)
N/A
Flame A, B, C or D ................................................:
A.1.5
Test procedure
N/A
A.1.6
Compliance criteria
N/A
Sample 1 burning time (s) .....................................:
Sample 2 burning time (s) .....................................:
Sample 3 burning time (s) .....................................:
A.2
Flammability test for fire enclosures of movable equipment having a total mass not
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
N/A
A.2.1
Samples, material..................................................:
Wall thickness (mm) ..............................................:
A.2.2
Conditioning of samples; temperature (°C) ... .......:
N/A
A.2.3
Mounting of samples ............................................:
N/A
A.2.4
Test flame (see IEC 60695-11-4)
N/A
Flame A, B or C ....................................................:
A.2.5
Test procedure
N/A
A.2.6
Compliance criteria
N/A
Sample 1 burning time (s) .....................................:
Page 26 of 58
Report No. 15039146 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
Sample 2 burning time (s) .....................................:
Sample 3 burning time (s) .....................................:
A.2.7
Alternative test acc. to IEC 60695-11-5, cl. 5 and 9
N/A
Sample 1 burning time (s) .....................................:
Sample 2 burning time (s) .....................................:
Sample 3 burning time (s) .....................................:
A.3
Hot flaming oil test (see 4.6.2)
N/A
A.3.1
Mounting of samples
N/A
A.3.2
Test procedure
N/A
A.3.3
Compliance criterion
N/A
B
ANNEX B, MOTOR TESTS UNDER ABNORMAL CONDITIONS (see 4.7.2.2 and
5.3.2)
5.3.2)
N/A
B.1
General requirements
N/A
Position .................................................................:
Manufacturer .........................................................:
Type ......................................................................:
Rated values ........................................................:
B.2
Test conditions
N/A
B.3
Maximum temperatures
(see appended table 5.3)
N/A
B.4
Running overload test
(see appended table 5.3)
N/A
B.5
Locked-rotor overload test
N/A
Test duration (days) ..............................................:
Electric strength test: test voltage (V) ...................:
B.6
Running overload test for d.c. motors in secondary
circuits
circuits
N/A
B.6.1
General
N/A
B.6.2
Test procedure
N/A
B.6.3
Alternative test procedure
N/A
B.6.4
Electric strength test; test voltage (V) ...................:
N/A
B.7
Locked-rotor overload test for d.c. motors in
secondary circuits
secondary circuits
N/A
B.7.1
General
N/A
B.7.2
Test procedure
N/A
B.7.3
Alternative test procedure
N/A
B.7.4
Electric strength test; test voltage (V) ..................:
N/A
B.8
Test for motors with capacitors
(see appended table 5.3)
N/A
Page 27 of 58
Report No. 15039146 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
B.9
Test for three-phase motors
(see appended table 5.3)
N/A
B.10
Test for series motors
N/A
Operating voltage (V) ............................................:
C
ANNEX C, TRANSFORMERS (see 1.5.4 and 5.3.3)
N/A
Position .................................................................:
Manufacturer .........................................................:
Type ......................................................................:
Rated values ........................................................:
Method of protection ............................................. :
C.1
Overload test
(see appended table 5.3)
N/A
C.2
Insulation
(see appended tables 5.2 and
C2)
C2)
N/A
Protection from displacement of windings ............ :
N/A
D
ANNEX D, MEASURING INSTRUMENTS FOR TOUCH-CURRENT TESTS
(see 5.1.4)
(see 5.1.4)
N/A
D.1
Measuring instrument
N/A
D.2
Alternative measuring instrument
N/A
E
ANNEX E, TEMPERATURE RISE OF A WINDING (see 1.4.13)
N/A
F
ANNEX F, MEASUREMENT OF CLEARANCES AND CREEPAGE DISTANCES
(see 2.10 and Annex G)
(see 2.10 and Annex G)
N/A
G
ANNEX G, ALTERNATIVE METHOD FOR DETERMINING MINIMUM
CLEARANCES
CLEARANCES
N/A
G.1
Clearances
N/A
G.1.1
General
N/A
G.1.2
Summary of the procedure for determining
minimum clearances
minimum clearances
N/A
G.2
Determination of mains transient voltage (V)
N/A
G.2.1
AC mains supply ...................................................:
N/A
G.2.2
Earthed d.c. mains supplies .................................:
N/A
G.2.3
Unearthed d.c. mains supplies .............................:
N/A
G.2.4
Battery operation ...................................................:
N/A
G.3
Determination of telecommunication network
transient voltage (V) ..............................................:
transient voltage (V) ..............................................:
N/A
Click on the first or last page to see other GO PLAY MICRO (serv.man2) service manuals if exist.