Harman Kardon GO PLAY MICRO (serv.man2) EMC - CB Certificate ▷ View online
Test Report issued under the responsibility of:
TEST REPORT
IEC 60950-1
Information technology equipment – Safety –
Part 1: General requirements
Report Number. .............................. :
15039146 001
Date of issue .................................... :
Oct. 08, 2010
Total number of pages ......................
58
CB Testing Laboratory .................. :
TÜV Rheinland (Shanghai) Co., Ltd.
Address ............................................ :
10-15/F, Huatsing Building, No. 88, Lane 777, West Guangzhong
Road, Zhabei District, Shanghai 200072, P.R. China
Road, Zhabei District, Shanghai 200072, P.R. China
Applicant’s name ........................... :
Harman Consumer, Inc.
Address ............................................ :
8500 Balboa Boulevard, Northridge, CA 91329, USA
Manufacturer’s name……………….: Harman Consumer, Inc.
Address ............................................ :
8500 Balboa Boulevard, Northridge, CA 91329, USA
Test specification:
Standard........................................... :
IEC 60950-1: 2005 (2nd Edition); Am 1: 2009
Test procedure ................................. :
CB Scheme
Non-standard test method…………..:
N/A
Test Report Form No. .................... :
IEC60950_1B
Test Report Form(s) Originator........ :
SGS Fimko Ltd
Master TRF ...................................... :
Dated 2010-04
Copyright © 2010 Worldwide System for Conformity Testing and Certification of Electrotechnical
Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved.
Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting
from the reader's interpretation of the reproduced material due to its placement and context.
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting
from the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB
Scheme procedure shall be removed.
Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
Test item description ..................... :
Speaker
Trade Mark....................................... :
harman / kardon
Manufacturer .................................... :
Same as applicant.
Model/Type reference ...................... :
Go + Play Micro
Ratings ............................................. :
24V
, 2.3A
Page 3 of 58
Report No. 15039146 001
TRF No. IEC60950_1B
List of Attachments (including a total number of pages in each attachment):
-
National Differences (on Page 42-58)
-
Photo documentation (10 pages)
Summary of testing:
Tests performed (name of test and test clause):
All applicable tests as described in Test Case and
Measurement Sections were performed.
Measurement Sections were performed.
•
The maximum operating ambient temperature
as specified by the manufacturer is +25°C.
Unless otherwise specified, throughout this
report, the tests were performed at around
+25°C.
Unless otherwise specified, throughout this
report, the tests were performed at around
+25°C.
•
Normal operation is considered 1/ 8th of
maximum undistorted power undistorted
power. Non-clipping was determined using a 1
kHz sinusoidal signal input. For maximum
normal operation, 1/8th of the non-clipping
amplitude was used with a filtered pink noise
input signal.
power. Non-clipping was determined using a 1
kHz sinusoidal signal input. For maximum
normal operation, 1/8th of the non-clipping
amplitude was used with a filtered pink noise
input signal.
•
The unit supplied by an approved external
power adaptor, which provided SELV only.
•
The approved external power supply output is
compliance with sub-clause 2.5 as limited
power source, therefore no fire enclosure is
required.
power source, therefore no fire enclosure is
required.
•
Due to enclosure made of V-2 Material, The
marking “For use only with H/K power supply
model/s: 700-0108” is stated on rating label.
model/s: 700-0108” is stated on rating label.
Testing location:
All tests as described in Test Case and
Measurement Sections were performed at the
laboratory described on page 2.
Measurement Sections were performed at the
laboratory described on page 2.
Summary of compliance with National Differences
EU Group Differences, EU Special National Conditions, EU A-Deviations, AT, AU, CA, CH, DE, DK, FI,
FR, GB, IT, KR, NL, NO, PL, SE, SI, US.
FR, GB, IT, KR, NL, NO, PL, SE, SI, US.
Explanation of used codes: AT=Austria, AU=Australia, CA=Canada, CH=Switzerland, DE=Germany,
DK=Denmark, FI=Finland, FR=France, GB=United Kingdom, IT=Italy, KR=Korea, NL=The Netherlands,
NO=Norway, PL=Poland, SE=Sweden, SI=Slovenia, US=United States of America.
DK=Denmark, FI=Finland, FR=France, GB=United Kingdom, IT=Italy, KR=Korea, NL=The Netherlands,
NO=Norway, PL=Poland, SE=Sweden, SI=Slovenia, US=United States of America.
For National Differences see corresponding Attachment.