Harman Kardon DMC 1000 (serv.man2) EMC - CB Certificate ▷ View online
Page 2 of 100
ST-07348
TRF No.: IECEN60065G
Copy of marking plate
Note:
1. The above markings are the minimum requirements required by the safety standard. For the final
production samples, the additional markings which do not give rise to misunderstanding may be added.
2. When this apparatus is vended to Canada, the dating code should be added in the marking plate.
3. When this apparatus is vended to United States of America, the dating code and a distinctive identification
to identify the factory should be added in the marking plate.
Page 3 of 100
ST-07348
TRF No.: IECEN60065G
Summary of testing:
The sample(s) tested complies with the requirements of IEC 60065: 2001 + A1: 2005 and EN 60065: 2002.
Compliance with the National requirements of “(countries)” as given in CB Bulletin “(112A)” was also
confirmed.
confirmed.
5 Marking test
5.1 Input test
7.1 Heating test
7.2 Softening temperature of thermoplastics test
9.1.1.1 Determination of hazardous live parts
9.1.1.2 Test finger
9.1.3 Test pin for ventilation or other holes
9.1.4 Test pin and straight test probe for terminals
9.1.6 Plug discharge test
9.1.7 External force – rigid test finger and test hook
10.2 Humidity treatment test
10.3 Insulation resistance test
10.3 Dielectric strength test
11 Fault conditions test
12.1.1 Bump test
12.1.2 Vibration test
12.1.3 Impact test
12.1.5 Stress relief test
12.2 Fixing test of actuating elements
12.4 Force test of drawer
13.3, 13.4 Clearances and creepage distances measurement
14.10.3 Battery rating measurement
15.2 Protective earth resistance test
17.1 Screw fixing test
19.1 Mechanical stability – 10° tilt test
19.2 Mechanical stability – force test
Page 4 of 100
ST-07348
TRF No.: IECEN60065G
General product information:
The apparatus is a Digital Media Server for use in a general home environment and for indoor use only. The
mains plug is considered as the disconnect device, and the apparatus is considered as portable and Class I
apparatus.
mains plug is considered as the disconnect device, and the apparatus is considered as portable and Class I
apparatus.
The apparatus is supplied by an approved building-in switching power supply module, and accompanied
with HDD, ODD, two USB ports, two Card slots and two DC Fans. Also provided with one HDMI output,
Composite and S-Video Outputs, Component Video Outputs, Coaxial Digital Audio Outputs, Zone 1/2/3/4
Audio Outputs, Auxiliary Audio Inputs, The Bridge Input Output, one Network Jack, Remote IR Input,
Remote IR Output and RS-232 Port.
with HDD, ODD, two USB ports, two Card slots and two DC Fans. Also provided with one HDMI output,
Composite and S-Video Outputs, Component Video Outputs, Coaxial Digital Audio Outputs, Zone 1/2/3/4
Audio Outputs, Auxiliary Audio Inputs, The Bridge Input Output, one Network Jack, Remote IR Input,
Remote IR Output and RS-232 Port.
The apparatus was submitted and evaluated for maximum manufacturer’s recommended ambient (Tmra)
of 50
of 50
°
C. The use of apparatus in tropical and/or moderate climate conditions.
The enclosures fixed together by screws.
Overall approx. 441 mm by 405 mm by 106 mm.
Click on the first or last page to see other DMC 1000 (serv.man2) service manuals if exist.