Sony DCR-TRV75 / DCR-TRV75E / DCR-TRV80 / DCR-TRV80E (serv.man3) Service Manual ▷ View online
13
Quick Start Guide
Recording a picture on the tape
(p. 36)
Monitoring the playback picture on the LCD
screen
(p. 52)
Do not pick up your camcorder
by holding parts as illustrated.
by holding parts as illustrated.
Viewfinder
Flash
LCD panel
Battery pack
When you purchase your camcorder, the clock setting is set to off. If you want to record the date
and time for a picture, set the clock setting before recording (p. 30).
and time for a picture, set the clock setting before recording (p. 30).
2
Set the POWER switch
to CAMERA while
pressing the small
green button.
to CAMERA while
pressing the small
green button.
4
Press START/STOP. Your
camcorder starts recording. To
stop recording, press START/
STOP again.
stop recording, press START/
STOP again.
1
Remove the lens cap.
3
Press OPEN
to open the
LCD panel.
The picture
appears on
the screen.
LCD panel.
The picture
appears on
the screen.
Viewfinder
When the LCD panel is closed,
use the viewfinder with your eye against the
eyecup.
Adjust the viewfinder lens to your eyesight
(p. 43).
When the LCD panel is closed,
use the viewfinder with your eye against the
eyecup.
Adjust the viewfinder lens to your eyesight
(p. 43).
1
Set the POWER
switch to VCR
while pressing the
small green button.
while pressing the
small green button.
3
Press
of the touch panel to
start playback.
Note
When using the touch panel, press
operation buttons lightly with your
finger or the supplied stylus (DCR-
TRV80E only) supporting the LCD
panel from the back side of it. Do not
press the LCD screen with sharp objects
other than the supplied stylus (DCR-
TRV80E only).
When using the touch panel, press
operation buttons lightly with your
finger or the supplied stylus (DCR-
TRV80E only) supporting the LCD
panel from the back side of it. Do not
press the LCD screen with sharp objects
other than the supplied stylus (DCR-
TRV80E only).
2
Press
of the touch panel to
rewind the tape.
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POWER
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POWE
R
14
Inserting the “Memory Stick”
(p. 134)
Insert the “Memory Stick” in the “Memory Stick” slot as far as it can go with the B mark
facing up as illustrated.
facing up as illustrated.
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from the
“Memory Stick” or recording the data on the “Memory Stick.” Do not turn the power off, eject the
“Memory Stick” or remove the battery pack. Otherwise, image data breakdown may occur.
Do not shake or strike your camcorder because your camcorder is reading the data from the
“Memory Stick” or recording the data on the “Memory Stick.” Do not turn the power off, eject the
“Memory Stick” or remove the battery pack. Otherwise, image data breakdown may occur.
Quick Start Guide – Recording on “Memory Stick”
Connecting the mains lead
Use the battery pack when using your camcorder outdoors (p. 24).
Open the DC IN
jack cover.
jack cover.
Connect the plug with its v
mark facing up.
mark facing up.
AC Adaptor (supplied)
Access lamp
B
mark
Press the “Memory Stick”
once lightly to eject it.
once lightly to eject it.
4
3
2
1
Fastening the grip belt
Fasten the grip belt firmly.
Fasten the grip belt firmly.
How to hold
your camcorder
your camcorder
Quick Start Guide
15
Recording still images on the “Memory Stick”
(p. 139)
Monitoring the playback still image on the LCD
screen
(p. 166)
When you purchase your camcorder, the clock setting is set to off. If you want to record the date
and time for a picture, set the clock setting before recording (p. 30).
and time for a picture, set the clock setting before recording (p. 30).
3
Press OPEN
to open the
LCD panel.
The picture
appears on
the screen.
to open the
LCD panel.
The picture
appears on
the screen.
1
Remove the lens cap (p. 36).
5
Press PHOTO deeply.
The image when you
pressed PHOTO deeply will
be recorded on the “Memory
Stick.”
The image when you
pressed PHOTO deeply will
be recorded on the “Memory
Stick.”
12
FINE
640
Viewfinder
When the LCD panel is
closed, use the
viewfinder with your
eye against the eyecup.
Adjust the viewfinder
lens to your eyesight
(p. 43).
When the LCD panel is
closed, use the
viewfinder with your
eye against the eyecup.
Adjust the viewfinder
lens to your eyesight
(p. 43).
FINE
640
2
Set the POWER switch
to MEMORY while
pressing the small green
button.
pressing the small green
button.
Make sure that the
LOCK switch is set to
the left (unlock)
position.
the left (unlock)
position.
4
Press PHOTO lightly.
When the green ● mark
stops flashing, then lights
up, you can record a still
image.
When the green ● mark
stops flashing, then lights
up, you can record a still
image.
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
PO
WER
1
Set the POWER
switch to MEMORY
while pressing the
small green button.
switch to MEMORY
while pressing the
small green button.
2
Press PLAY. The last
recorded image is
displayed.
recorded image is
displayed.
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POWER
PLAY
Do not pick up your camcorder
by holding parts as illustrated.
by holding parts as illustrated.
Viewfinder
Flash
LCD panel
Battery pack
Quick Start Guide
16
Guide de démarrage rapide
Français
Guide de démarrage rapide – Enregistrement sur la cassette
Raccordement du cordon d’alimentation
Pour filmer en extérieur, utilisez la batterie (p. 24).
Adaptateur secteur (fourni)
Branchez la fiche en dirigeant la marque v vers le haut.
Ouvrez le cache de la prise
DC IN.
DC IN.
Pour éjecter la cassette
Procédez comme indiqué ci-dessus et sortez la cassette lorsque le logement est complètement
ouvert à l’étape 3.
ouvert à l’étape 3.
Remarque
Ne pas appuyer trop fort sur le logement de la cassette. Il risque d’être endommagé.
Ne pas appuyer trop fort sur le logement de la cassette. Il risque d’être endommagé.
Mise en place de la cassette
1
Faites glisser
OPEN/EJECT dans le
sens de la flèche et
ouvrez le couvercle.
OPEN/EJECT dans le
sens de la flèche et
ouvrez le couvercle.
2
Appuyez au centre
du dos de la cassette
pour insérer la
cassette. Insérez-la
tout droit et à fond
dans son logement
avec la fenêtre
tournée vers le haut.
du dos de la cassette
pour insérer la
cassette. Insérez-la
tout droit et à fond
dans son logement
avec la fenêtre
tournée vers le haut.
3
Fermez le logement de
cassette en appuyant
sur l’indication
inscrite sur le
logement.
Quand le logement est
abaissé, fermez le
couvercle de sorte qu’il
s’encliquette.
cassette en appuyant
sur l’indication
inscrite sur le
logement.
Quand le logement est
abaissé, fermez le
couvercle de sorte qu’il
s’encliquette.
Fixation de la sangle
Attachez bien la sangle.
Attachez bien la sangle.
Prise en main
du caméscope
du caméscope
4
3
2
1
Click on the first or last page to see other DCR-TRV75 / DCR-TRV75E / DCR-TRV80 / DCR-TRV80E (serv.man3) service manuals if exist.