DOWNLOAD Sony DCR-PC115E / DCR-PC120E Service Manual ↓ Size: 5.31 MB | Pages: 86 in PDF or view online for FREE

— 2 —

0

0

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

Mass (approx.)
580 g (1 lb 4 oz)
main unit only
690 g (1 lb 8 oz)
including the battery pack
NP-FM50, cassette DVM60 and lens
cap
Supplied accessories
See page 3.

Power requirements
100 – 240 V AC, 50/60 Hz
Power consumption
23 W
Output voltage
DC OUT: 8.4 V, 1.5 A in the
operating mode
Operating temperature
0

°

C to 40

°

C (32

°

F to 104

°

F)

Storage temperature
–20

°

C to + 60

°

C (–4

°

F to + 140

°

F)

Dimensions (approx.)
125 

×

 39 

×

 62 mm

(5 

×

 1 9/16 

×

 2 1/2 in.) (w/h/d)

excluding projecting parts
Mass (approx.)
280 g (9.8 oz)
excluding power cord

Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
8.5 Wh (1 180 mAh)
Dimensions (approx.)
38.2 

×

 20.5 

×

 55.6 mm

(1 9/16 

×

 13/16 

×

 2 1/4 in.)

(w/h/d)
Mass (approx.)
76 g (2.7 oz)
Type
Lithium ion

Memory
Flash memory
8MB: MSA-8A
Operating voltage
2.7 – 3.6 V
Power consumption
Approx. 45 mA in the operating
mode
Approx. 130 

µ

A in the standby

mode
Dimensions (approx.)
50 

×

 2.8 

×

 21.5 mm

(2 

×

 1/8 

×

 7/8 in.) (w/h/d)

Mass (approx.)
4 g (0.14 oz)

Design and specifications are
subject to change without notice.

— 3 —

Make sure that the following accessories are supplied with your camcorder.

3-070-988-11 MANUAL, INSTRUCTION (ENGLISH/RUSSIAN)

(PC115E/PC120E:UK)

3-070-988-21 MANUAL, INSTRUCTION (ITALIAN/GREECE) (PC115E)
3-070-988-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)

(PC115E)

3-070-988-41 MANUAL, INSTRUCTION (FRENCH/GERMAN)

(PC120E:AEP)

3-070-988-51 MANUAL, INSTRUCTION (ENGLISH/DUTCH)

(PC120E:AEP)

3-071-132-11 OPERATING INSTRUCTION(NETWORK)

(ENGLISH/FRENCH)(PC120E)

3-071-132-21 OPERATING INSTRUCTION(NETWORK)

(GERMAN/DUTCH) (PC120E:AEP)

The components identified by mark 

0

 or dotted

line with mark 

0

 are critical for safety.

Replace only with part number specified.

Wireless Remote Commander (1)
RMT-811
1-475-950-21

AC power adaptor (1)
(AC-L10A)

0

 1-475-599-11

Size R6 (AA) battery for
Remote Commander (2)
(not supplied)

A/V connecting cable (1.5m) (1)
1-765-080-11

21-pin adaptor (1)
1-573-291-11

Lens cap (1)
X-3949-944-1

USB cable (1)
1-757-293-21

CD-ROM
(SPVD-004(P) USB Driver)(1)
3-066-676-01

Power cord (Main lead)(1) (AEP model)

0

 1-769-608-11

Power cord (Main lead)(1) (UK model)

0

 1-783-374-11

Battery terminal cover (1)
3-057-482-01

NP-FM50 battery pack (1)
(Not supplied)

Lens hood (1)
3-063-515-01

Memory stick (1)
MSA-8A
A-7024-735-A

DCR-

Destination

NETWORK (Bluetooth)

Flash memory
(VC-270 board IC1406)

SDRAM
(VC-270 board IC1404)

BT-003 board

PC115E

AEP

✕

4Mbit

16Mbit

✕

PC120E

AEP, UK

a

32Mbit

64Mbit

a

Remarks

X301 of VC-270 board is 40.5MHz.

With BT-003 board

— 4 —

1.

POWER SUPPLY DURING REPAIRS ····························· 5

2.

TO TAKE OUT A CASSETTE WHEN NOT EJECT
(FORCE EJECT) ································································ 5

3.

DISCHARGING OF THE FLASHLIGHT POWER
SUPPLY CAPACITOR ······················································ 6

3-1.

DISCHARGING THE CAPACITOR USING THE
SHORT JIG ········································································ 6

3-1-1. PREPARING THE SHORT JIG ········································· 6
3-1-2. DISCHARGING THE CAPACITOR ································· 6
3-2.

DISCHARGING THE CAPACITOR USING THE
REMOTE COMMANDER ················································ 6

3-2-1. DISCHARGING THE CAPACITOR ································· 6
3-2-2. PROCESSING AFTER COMPLETING REPAIRS/

ADJUSTMENTS ································································ 6

1.

SELF-DIAGNOSIS FUNCTION ······································· 7

2.

SELF-DIAGNOSIS DISPLAY ·········································· 7

3.

SERVICE MODE DISPLAY ············································· 7

3-1.

Display Method ·································································· 7

3-2.

Switching of Backup No. ··················································· 7

3-3.

End of Display ···································································· 7

4.

SELF-DIAGNOSIS CODE TABLE ··································· 8

1.

ORNAMENTAL PARTS ···················································· 9

2.

DISASSEMBLY ······························································· 10

2-1.

CABINET (L) SECTION ················································· 12

2-2.

VTR COMPLETE, CABINET (R) SECTION ················ 13

2-3.

FJ-035 BOARD ································································ 14

2-4.

VM-027 BOARD ····························································· 15

2-5.

CD-349P BOARD, LENS DEVICE ································ 15

2-6.

VC-270 BOARD ······························································ 16

2-7.

MECHANISM DECK ······················································ 16

2-8.

FLASH UNIT (MC) ························································· 17

2-9.

FLASH UNIT (ST) ·························································· 17

2-10. CABINET (G) BLOCK ASSEMBLY, ETC. ···················· 18
2-11. CONTROL SWITCH BLOCK (FK-1850) ······················ 19
2-12. CONTROL SWITCH BLOCK (PS-1850) ······················· 19
2-13. BLIND PLATE ASSEMBLY ··········································· 20
2-14. PD-148B BOARD, INVERTER TRANSFORMER UNIT · 20
2-15. HINGE ASSEMBLY ························································ 21
3.

REPAIR PARTS LIST ······················································ 22

3-1.

EXPLODED VIEWS ······················································· 22

3-1-1. OVERALL SECTION ······················································ 22
3-1-2. CABINET (L) SECTION ················································· 23
3-1-3. VTR OVERALL SECTION ············································· 24
3-1-4. LENS-EVF SECTION ····················································· 25
3-1-5. CABINET (R) SECTION-1 ············································· 26
3-1-6. CABINET (R) SECTION-2 ············································· 27

Main Features ············································································· 28
Quick Start Guide ······································································· 28
Getting started

Using this manual ··································································· 29
Checking supplied accessories ··············································· 29
Step 1 Preparing the power supply ········································· 30
   Installing the battery pack ···················································· 30
   Charging the battery pack ···················································· 30
   Connecting to a wall socket ················································· 31
Step 2 Setting the date and time ············································· 31
Step 3 Inserting a cassette ······················································· 32

Recording – Basics

Recording a picture ································································· 32
Shooting backlit subjects – BACK LIGHT ···························· 35
Shooting in the dark – NightShot/Super NightShot ··············· 35
Self-timer recording ································································ 35
Checking the recording – END SEARCH / EDITSEARCH /
   Rec Review ·········································································· 36

Playback – Basics

Playing back a tape ································································· 36

To display the screen indicators – Display function ··············· 36
Viewing the recording on TV ················································· 37

Advanced Recording Operations

Recording a still image on a tape – Tape Photo recording ····· 38
Adjusting the white balance manually ···································· 39
Using the wide mode ······························································ 40
Using the fader function ························································· 40
Using special effects – Picture effect ······································ 41
Using special effects – Digital effect ······································ 41
Using the PROGRAM AE function ········································ 42
Adjusting the exposure manually ··········································· 43
Focusing manually ·································································· 43
Interval recording ···································································· 44
Frame by frame recording – Cut recording ···························· 44

Advanced Playback Operations

Playing back a tape with picture effects ································· 45
Playing back a tape with digital effects ·································· 45
Enlarging images recorded on tapes – Tape PB ZOOM ········· 45
Quickly locating a scene using the zero set memory function ····· 46
Searching the boundaries of recorded tape by title – Title search · 46
Searching a recording by date – Date search ·························· 47
Searching for a photo – Photo search/Photo scan ··················· 47

Editing

Dubbing a tape ········································································ 48
Dubbing only desired scenes – Digital program editing (on tapes) ·· 49
Using with analog video unit and your computer
   – Signal convert function ····················································· 52
Recording video or TV programmes ······································ 53
Inserting a scene from a VCR – Insert editing ························ 54
Audio dubbing ········································································ 55
Superimposing a title ······························································ 56
Making your own titles ··························································· 57
Labelling a cassette ································································· 57

Customising Your  Camcorder

Changing the menu settings ···················································· 58

“Memory Stick” Operations

Using a “Memory Stick” – introduction ································· 60
Recording still images on “Memory Stick”s
   – Memory Photo recording ·················································· 63
Recording an image from a tape as a still image ···················· 65
Superimposing a still image in the “Memory Stick” on an
   image – MEMORY MIX ····················································· 66
Recording moving pictures on “Memory Stick”s
   – MPEG movie recording ···················································· 68
Recording a picture from a tape as a moving picture ············· 68
Recording edited pictures as a moving picture
   – Digital program editing (on “Memory Stick”s) ················ 69
Copying still images from a tape – Photo save ······················· 70
Viewing a still image – Memory photo playback ··················· 71
Viewing a moving picture – MPEG movie playback ············· 72
Viewing images using computer ············································· 72
Copying the image recorded on “Memory Stick”s to tapes ···· 74
Enlarging still images recorded on “Memory Stick”s
   – Memory PB ZOOM ·························································· 75
Playing back images in a continuous loop – SLIDE SHOW ····· 75
Preventing accidental erasure – Image protection ·················· 76
Deleting images ······································································ 76
Writing a print mark – PRINT MARK ··································· 76
Using the optional printer ······················································· 77

Using the Network function

Accessing the network ···························································· 77

Troubleshooting

Types of trouble and their solutions ········································ 78
Self-diagnosis display ····························································· 79
Warning indicators and messages ··········································· 79

Additional Information

Usable cassettes ······································································ 80
About the “InfoLITHIUM” battery pack ································ 81
About i.LINK ·········································································· 81
Using your camcorder abroad ················································· 82
Maintenance information and precautions ······························ 82

Quick Reference

Identifying the parts and controls ··········································· 84

— 5 —

In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
This following two methods are available to prevent this. Take note of which to use during repairs.

Use the AC power adaptor (AC-L10, AC-VQ800, AC-SQ950 etc.).

Connect the servicing remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the commander switch to the “ADJ” side.

1

Refer to 2-2. to remove the HS cover.

2

Refer to 2-2. to remove the jack cover.

3

Refer to 2-2. to remove the cabinet (R) assembly.

4

Refer to “3. DISCHARGING OF THE FLASHLIGHT POWER SUPPLY CAPACITOR” to discharge the flash power supply capacitor.

5

Refer to 2-3. to remove the mechanism deck and the lens block and the EVF block from the cabinet (L) block.

6

Disconnect CN302 (72P, 0.4mm) of VC-270 board.

7

Disconnect CN006 (27P, 0.3mm) of VC-270 board.

8

Supply +4.5V from the DC power supply to the loading motor and unload with a pressing the cassette compartment.

: Unloading

: Loading

VC-270 board

Loading motor

Regulated power supply

(+4.5Vdc)

CN006

CN302