Sony DSC-KW1 / DSC-KW11 Service Manual ▷ View online
4-16
DSC-KW1/KW11
4-3-
10
. Set Language Destination
Note:
Finish all of the adjustment except for the Language Destination setting.
Once the Language Destination setting is finished, it cannot be reset.
Once the Language Destination setting is finished, it cannot be reset.
USB Driver and Service Tool
Put the two folders “USB Driver” and “Service Tool” downloaded in “4-1-5. Setting the Adjustment Mode” (Page 4-3) in any place of the PC.
Confirm that the “USB Driver” folder includes the following items.
Confirm that the “USB Driver” folder includes the following items.
The procedure of installing a USB Driver is as follows.
1) Execute the “SPCA6350_v[][][][].exe” in the “USB Driver” folder.
2) In the using PC, install the USB Driver according to the guidance on the screen.
Connecting USB to PC
Connect the equipment as shown below. (Fig. 4-3-
30
)
Micro USB Cable
Personal Computer
1
To a USB jack of the PC
2
To the Micro USB
Terminal
Fig.
4-3-
30
Starting up the Service Tool
Double click the “ServiceTool_Ver[][][].exe” in the “Service Tool” folder to start up the Service Tool. (Fig. 4-3-
31
)
Fig.
4-3-
31
Ver. 1.2 2014.11
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
4-17
DSC-KW1/KW11
The setting is finished normally.
Fig. 4-3-
32
The setting is complete.
Screen display
The setting is finished abnormally.
Fig. 4-3-
33
Malfunction of Set
Language Destination
result
Language Destination
result
Example:
Camera Start NG
Setting order
The Language Destination setting order is as follows.
Confirm the indication
on the screen.
Press the “Read” button, “PRODUCT CODE” and “SERIAL No.” will displayed on the screen.
Select the correspond language destination from the pull-down menu, input the “SERIAL No.”, then press the “Write” button.
*1 The “SERIAL No.” is written on the bottom of the camera.
Select the correspond language destination from the pull-down menu, input the “SERIAL No.”, then press the “Write” button.
*1 The “SERIAL No.” is written on the bottom of the camera.
*2 Once the Language Destination setting is finished, it cannot be reset.
The camera restarts and switches to the Mass
Storage connection automatically.
Storage connection automatically.
Disconnect the camera from the Micro USB
cable and perform the initial setting.
cable and perform the initial setting.
In case of the setting is finished normally,
the setting completion indication appears on
the screen. (Fig. 4-3-
the setting completion indication appears on
the screen. (Fig. 4-3-
32
)
In case of the setting is finished abnormally,
the following message appears on the screen.
(Fig. 4-3-
the following message appears on the screen.
(Fig. 4-3-
33
)
In this case, perform the setting again upon
the message.
the message.
Finished abnormally.
Finished normally.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Ver. 1.2 2014.11
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
4-18
DSC-KW1/KW11
Selectable language table
Destination
AREA
SELECTABLE LANGUAGE
VIDEO OUT
Default
English
French
German
Spanish
Italian
Portuguese
Dutch
Russian
Swedish
Norwegian
Danish
Finnish
Polish
Czech
Hungarian
T
raditional Chinese
Simplified Chinese
Korean
Persian
Arabic
Thai
T
urkish
Greek
Croatian
Romanian
Bulgarian
V
ietnamese
Brazilian Portuguese
Indonesia
Ukrainian
Malay
E32
E
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
HK1 Hong Kong z a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CN2
Chinese
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
KR2
Korea
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
NTSC
TW6
Taiwan
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
NTSC
z
: INITIAL LANGUAGE
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
1.1
1.1
1.2
2014.09
2014.10
2014.10
2014.11
Official Release
Revised-1
(A1 14-077)
Revised-1
(A1 14-077)
Revised-2
(A2 14-100)
(A2 14-100)
—
• Change of REPAIR PARTS LIST.
Page
Page
1-2
,
1-3
• Change of SERVICE NOTE.
Page
Page
2-3
• Change of DISASSEMBLY & ASSEMBLY.
Page
Page
3-4
• Addition of ADJUSTMENT.
Page
Page
4-1
• Addition of ADJUSTMENT.
Page
Page
4-1
,
4-3
,
4-15
• Change of ADJUSTMENT.
Page
Page
4-16
,
4-17
—
Yes
Yes
Revision History
Click on the first or last page to see other DSC-KW1 / DSC-KW11 service manuals if exist.