Sony DSC-KW1 / DSC-KW11 Service Manual ▷ View online
4-8
DSC-KW1/KW11
Adjustment order
Screen display
4-3-4. Dark DP Adjustment
The Dark DP (Dead Pixel) Adjustment order is as follows.
Note:
Perform the Dark DP Adjustment after those performed in 4-3-2 to 4-3-3.
Perform the Dark DP Adjustment after those performed in 4-3-2 to 4-3-3.
Small pattern box (PTB-1450) setting:
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
OK: The adjustment is finished normally.
OK
FINISH ----
Threshold:
DP NUM:
DP NUM:
Time(Sec)
DARK DPC
DARK DPC
512
0
16
1
Fig. 4-3-11
The adjustment is complete.
NG: The adjustment is finished abnormally.
NG
FINISH ----
Threshold:
DP NUM:
DP NUM:
Time(Sec)
DARK DPC
DARK DPC
602
99
106
1
Fig. 4-3-12
Malfunction of Dark DP
adjustment result
adjustment result
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 4-3-12)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 4-3-12)
In this case, confirm the adjusting environment
and readjust.
Touch the Up, Down, Right or Left key to change selected item. Choose “Dark DPC (LV10)”,
touch the Set key, select “OK”, and touch the Set key to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
touch the Set key, select “OK”, and touch the Set key to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 4-3-11)
Press the “Shutter” button to return to
adjustment menu.
the adjustment completion indication appears
on the screen. (Fig. 4-3-11)
Press the “Shutter” button to return to
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 4-3-10)
Equipment required: Small pattern box (PTB-1450)
Cover camera lens and
Small pattern box (PTB-1450) (All black)
Clear chart
Small pattern box (PTB-1450) (All black)
Clear chart
Small pattern box
(PTB-1450)
(PTB-1450)
5 mm or less
Black cloth
Camera
Screen side
Lens side
Fig. 4-3-10
4-9
DSC-KW1/KW11
Adjustment order
Screen display
4-3-5. Light/S.S Adjustment
The Light/S.S (Light Dead Pixel/Slow Shutter Dead Pixel)
Adjustment order is as follows.
Adjustment order is as follows.
Note:
Perform the Light/S.S Adjustment after those performed in 4-3-2 to 4-3-4.
Perform the Light/S.S Adjustment after those performed in 4-3-2 to 4-3-4.
OK: The adjustment is finished normally.
OK
SENSOR_30_FPS_720P
HighThreshold:
Preview DPN:
Preview DPN:
95
2
Preview DPC
OK
OK
OK
Fig.
4-3-14
The adjustment is complete.
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
Touch the Up, Down, Right or Left key to change selected item. Choose “Light S.S (BLACK)”,
touch the Set key, select “OK”, and touch the Set key to start.
*1 If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
*2 Waiting time from start is approximately 15 minutes or more on this adjustment.
touch the Set key, select “OK”, and touch the Set key to start.
*1 If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
*2 Waiting time from start is approximately 15 minutes or more on this adjustment.
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 4-3-14)
the adjustment completion indication appears
on the screen. (Fig. 4-3-14)
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Cover camera lens (All black) (Fig. 4-3-13)
Press the "Shutter" button to return to Adjustment
menu, and press the "ON/OFF (Power)" button to
restart camera.
menu, and press the "ON/OFF (Power)" button to
restart camera.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 4-3-15)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 4-3-15)
In this case, confirm the adjusting environment
and readjust.
Camera
Equipment required: Cover camera lens
(All black)
(All black)
Black cloth
Screen side
Lens side
Fig. 4-3-13
NG: The adjustment is finished abnormally.
NG
FINISH ----
1
Threshold:
DP NUM:
DP NUM:
137
8191
Time(Sec):
LIGHT DPN:
LIGHT DPN:
26
Fig. 4-3-15
Malfunction of Light S.S
(BLACK) adjustment result.
(BLACK) adjustment result.
4-10
DSC-KW1/KW11
4-3-6. Flash WB Adjustment
Preparing the Flash Adjustment Box
A dark room is required to provide an accurate flash adjustment. If it is not available, prepare the flash adjustment box as shown below.
1) Provide woody board A, B, C and D of 15 mm thickness. (Fig. 4-3-16)
2) Apply black mat paint to one side of woody board A, B and D.
3) Attach background paper (J-2501-130-A) to woody board C.
4) Assemble so that the black sides and the background paper side of woody board A, B, C and D are internal. (Fig. 4-3-17)
Woody board A
Woody board B
Woody board B
Woody board C
Woody board A
Woody board D
Front of the lens
L = 500 mm
L
Camera
Woody board A (2)
400 mm
Woody board B (2)
370 mm
Woody board C (1)
700 mm
513 mm
513 mm
700 mm
Woody board D (1)
370 mm
370 mm
700 mm
730 mm
100 mm
120 mm
Fig.
4-3-16
Fig. 4-3-17
4-11
DSC-KW1/KW11
Adjustment order
Screen display
OK: The adjustment is finished normally.
Led 1300
R Gain
G Gain
B Gain
G Gain
B Gain
457
MEAN G
753
256
572
572
a
FINISH.
103
OK
Moving
Fig. 4-3-18
The adjustment is complete.
NG: The adjustment is finished abnormally.
Led 1300
R Gain
G Gain
B Gain
G Gain
B Gain
256
MEAN G
1058
256
220
220
a
CaliEr
103
NG
Moving
Fig. 4-3-19
Malfunction of Flash WB
adjustment
adjustment
The Flash WB (White Balance with AF assist light) Adjustment order is as follows.
Note:
Perform the Flash WB Adjustment after those performed in 4-3-2 to 4-3-5.
Perform the Flash WB Adjustment after those performed in 4-3-2 to 4-3-5.
Confirm the indication
on the screen.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 4-3-19)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 4-3-19)
In this case, confirm the adjusting environment
and readjust.
n
Touch the Up, Down, Right or Left key to change selected item. Choose “FLASH WB”,
touch the Set key, select “OK”, and touch the Set key to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
touch the Set key, select “OK”, and touch the Set key to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 4-3-18)
Press the “Shutter” button to return to
adjustment menu.
the adjustment completion indication appears
on the screen. (Fig. 4-3-18)
Press the “Shutter” button to return to
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Place the camera in front of the Flash Adjustment Box. (Fig. 4-3-17)
Finished normally.
Finished abnormally.
Click on the first or last page to see other DSC-KW1 / DSC-KW11 service manuals if exist.