DOWNLOAD Sony DSC-KW1 / DSC-KW11 Service Manual ↓ Size: 2.11 MB | Pages: 39 in PDF or view online for FREE

DSC-KW1/KW11

3-6

1.   Warm up the Lens Ring block.
2.   Put a clean cleaning cloth inside of the top cover, and press the 

Lens Ring Block from the inside, then remove it.

Drier

Cleaning cloth
(P/N :J-6082-636-A
 CCD Cleaning Cloth)

Lens Ring Block

3.   Install the Lens Assy to the Top Cover .

 

Top Cover Assy

Lens Assy

4.   Confirm the state of Adhesive sheets and change it if there is not 

any adhesive force of the Adhesive sheets.

 

Lens Ring Block

Adhesive sheet 1

Adhesive sheet 2

Top Cover

5.   Orientation the Lens Rubber and attach it.
6.   Confirm that there are not dirt and material inside of the Lens 

Ring Block.

7.   Attach the Lens Ring Block.

 

Lens Ring Block

Lens Rubber

Section View

Outside

Inside

4-1

DSC-KW1/KW11

When replacing these parts, adjust the items indicated by “ z ” in the following table.

Adjustment item

Replaced parts 

Lens Assy

CMOS Board Assy

Main Board Assy

AF Assist Light Board Assy

TP OLED Block Assy

Focus Adjustment

z

z

z

OB Adjustment

z

z

z

WB/AGC Adjustment

z

z

z

Dark DP Adjustment

z

z

z

Light/S.S Adjustment

z

z

z

Flash WB Adjustment

z

z

z

z

Lens Option

z

TP Adjustment

z

z

Display WB Check/Calibration

z

z

Set Language Destination

z

Personal computer
(Note)

J-1

J-3

J-5

J-4

Clear chart
J-6082-560-A

J-6

9 colors chart
J-6082-562-A

J-7

Mini flange back jig
J-6082-719-A
        or
Flange back
adjustment jig 
J-6082-563-A
        or
Infinity jig (1000mm)
J-6082-747-A

J-2

Small pattern box
PTB-1450
J-6082-557-A

J-9

Camera table
J-6082-384-A

J-8

Micro
USB cable
1-848-650-11

J-10

Memory Card

Rechargeable battery
pack NP-BN 

Ball head
(Tiltable angle: 90° max.)
(Commercially available)

The changed portions from
Ver. 1.1 are shown in blue.

4-2

DSC-KW1/KW11

Note:
Personal computer
OS : 

Vista/7/8

RAM  : 256 MB (1 GB: Vista/7/8) or more recommended
USB  : 2.0 recommended (also compatible with 1.1)

Following are keys and functions used in adjustment. (Fig. 4-1-2)

OLED screen/Touch panel

ON/OFF (Power) button

Shutter button

Right Key

Left Key

Up Key

Set Key

Down Key

Set the camera on the Camera table. (Fig. 4-1-3)

Camera table
(J-6082-384-A)

Ball head
(Commercially available)

4-3

DSC-KW1/KW11

1)  Download the adjustment tool “ADJ_Tool_KW1_Ver[][][].zip”.
 

Uncompress the “ADJ_Tool_KW1_Ver[][][].zip”, then confirm that it includes the following items.

• EnableTest.txt

•  DSC00001.JPG: Refer to “4-3-9. Display WB Check/Calibration”. (Page 4-15)
•  DSC00002.JPG: Refer to “4-3-9. Display WB Check/Calibration”. (Page 4-15)

•  USB Driver (Folder): Refer to “4-3-

10

. Set Language Destination”. (Page 4-16)

•  Service Tool (Folder): Refer to “4-3-

10

. Set Language Destination”. (Page 4-16)

2)  Save the uncompressed file “EnableTest.txt” in the root directory of the Memory Card after formatting the it.

  Saving it in other directories causes a malfunction of program.
  Save the Memory Card after confirming that the “EnableTest.txt” is empty.
  Be sure to format the Memory Card on the camera.
  If “EnableTest.txt” is still remained after the adjustment, delete it.

3)  With the camera turned off, insert the Memory Card with the “EnableTest.txt” into the Memory card slot of the camera.

4)  Press the “ON/OFF (Power)” button while turning the “Shutter” button.

5)  After a few seconds, the Adjustment mode screen will appear on the screen. (Fig. 4-1-4)

6)  Touch the Set key, the initial screen for the adjustment mode will appear. (Fig. 4-1-5)

 

Ver:X.XXXX

TupFW Ver:1007

MB/LCD:

OK

FuncCheck:

OK

AF Clbt:

OK

OB Clbt:

OK

WB/Agc:

OK

Light DPC:

OK

Dark DPC:

OK

Boot Type:

OK

UsbMode:

OK

LensOpt:

OK

AF Lamp:

OK

WIFI:

OK

NFC:

OK

TUP_FW:

OK

FlashWB:

NG

No Box No.

Dso ID:XXXXXXXX

Index : 01

 

⇨

 

X.XXXX

A0E6V3000033

Index : 01

CLBT INFO

V

V

V

MB/LCD

OB CLBT

WB/AGC

(BLACK)

(LV10)

The item that has been adjusted may be disabled to be readjusted. 
If the readjustment is required, or when replacing Lens Assy, CMOS Board Assy, Main Board Assy and TP OLED Block Assy, it is necessary 
to enable the adjustment upon the following procedure.

1)  Touch the Up, Down, Right or Left key to choose an adjustment item.

2)  Press the “Shutter” button.

3)  Touch the Left key.
 (Disable 

“000001” 

→ Disable “000000”) (Fig. 4-1-６)

 

Example: For MB/LCD

 

Disable

Run LCD

Video

Only LCD

000001

000000

000000

000000

 

⇨

 

Disable

Run LCD

Video

Only LCD

000000

000000

000000

000000

The changed portions from
Ver. 1.1 are shown in blue.