Sharp VC-MH75 (serv.man24) User Manual / Operation Manual ▷ View online
29
www.sharp.co.uk/support
CUSTOMISED INSTALLATION
MANUALLY SETTING THE CLOCK
This procedure will allow you to set the clock manually.
1.
Press the
MENU
button.
2.
Press the [
/
] menu select buttons to
select SET UP.
Press the
SET
button to confirm.
3.
Press the [
/
] menu select buttons to
select CLOCK.
Press the
SET
button to confirm.
4.
Press the [
/
] menu select buttons to
select either 12 or 24 hour clock.
5.
Press the
[
/
]
menu select buttons to select
TIME. Enter the time using the
NUMBER
buttons or the [
/
] menu select buttons. If
the minutes or hours are less than 10, enter the
leading 0. If using the 12 hour clock enter AM or
PM by pressing the
AM/PM
button on the
remote control.
6.
Press the
[
/
]
menu select buttons to select
DATE. Enter the date using the
NUMBER
buttons or the [
/
] menu select buttons.
For example, for 1st April enter
01 04
.
7.
Press the
[
/
]
menu select buttons to select
YEAR. Enter the last two digits of the year using
the
NUMBER
buttons or [
/
]. For
example, for 2003 enter
03
. For the year 2004
enter
04.
8.
Press the
SET
button to confirm.
NOTE:
•
You will need to update the clock for Summer/Winter daylight saving.
S E T U P
CHANN E L P R E S E T
CHANN E L SOR T
CHANN E L SOR T
C L OCK
: S E L EC T
: CHANGE
S E T
: E N T E R ME NU : E X I T
C L OCK
MOD E
T I ME
DA T E
Y E AR
2 4 H
0 : 0 0
0 1 / 0 4
0 3
MOD E : 2 4 H / 1 2 H
: S E L EC T
: CHANGE
S E T
: E N T E R ME NU : E X I T
Remote Control
MENU
SET
ZERO
BACK
BACK
TIMER
ON/OFF
AUDIO
OUT
SKIP
SEARCH
SV/V+/
TIMER
TIMER
CLEAR
MODE OSD
MENU
SET
MENU SELECT BUTTONS
3.
4.
MENU
SET
SET
AM/PM
/
SET
TINS-A724UMZZ.book Page 29 Monday, January 6, 2003 11:22 AM
30
www.sharp.co.uk/support
MORE INFORMATION ABOUT YOUR VCR
VCR DISPLAY
NOTE:
SELECTING THE OUTPUT FROM THE VCR
If your VCR is connected to your TV with a scart lead, when you start to play a video tape the
VCR will automatically switch its output so that playback picture is shown on the TV.
In this case ‘VCR’ will appear on the VCR display.
You can manually override this by pressing
TV/VCR
on the remote control. Now the TV
broadcast channel will be seen on the TV screen and ‘VCR’ will disappear from the VCR
display.
•
Pressing
TV/VCR
again will return the TV picture to the playback picture.
•
Some models do not have all the features shown, therefore, they will not appear on the
display.
display.
1.
TIMER RECORD
indicator.
2.
VCR
MODE
indicator.
3.
TAPE MOTION STATUS
indicator
4.
RECORDING
indicator.
5.
AUDIO OUTPUT
indicator.
6.
CHILD LOCK
indicator.
7.
TAPE SPEED
indicator.
8.
VIDEO PROGRAMMING
SYSTEM / PROGRAMME
DELIVERY CONTROL
SYSTEM / PROGRAMME
DELIVERY CONTROL
indicator.
9.
DECODER
indicator.
10.
CLOCK, TAPE COUNTER,
TAPE STATUS AND CHANNEL
PRESET STATUS
TAPE STATUS AND CHANNEL
PRESET STATUS
.
TV/VCR
TV/VCR
TINS-A724UMZZ.book Page 30 Monday, January 6, 2003 11:22 AM
31
www.sharp.co.uk/support
MORE INFORMATION ABOUT YOUR VCR
ON-SCREEN DISPLAY
All the information you need on the VCR status will be summarised on the on-screen display.
If you are recording, playing back a tape or watching a broadcast on the video channel you
can call up three standard on-screen displays. The display can be selected by pressing the
MODE OSD
button on the remote control, 1,2,3 or 4 times.
1.
AUTO
, the current mode and channel
number will be displayed for 3 seconds when an
operation or number button is pressed.
operation or number button is pressed.
2.
FULL
, all the active features will also be shown
on screen.
3.
COUNTER
, this display will show the tape
counter and amount of tape remaining.
4.
DISPLAY OFF
, this will remove the display
from the screen.
NOTES:
•
The default time and date will not be displayed if the clock has not been set.
•
The VCR will return to display
1
. each time it is switched on.
•
If you are recording from this VCR to another, make sure you remove the display from
the screen otherwise it will be recorded.
the screen otherwise it will be recorded.
MODE OSD
1.
■
1 CH 5 9
N I CAM
S T E R EO
S T E R EO
S P
L
R
Programme number and channel
Tape Status
Sharp Super Picture Status
NICAM signal
Tape speed
Audio output mode
Time
Date
Tape remaining
Tape counter
2.
■
1 CH 5 9
S U P E R
P .
ON
N I CAM
S T E R EO
S P
L
R
2 2 : 0 0
R EM 1 : 0 5
9 / 0 7 0 3
0 : 0 0 . 0 0
REM 1:05
0:00.00
3.
Module 20.fm Page 31 Monday, January 6, 2003 12:55 PM
32
www.sharp.co.uk/support
MORE INFORMATION ABOUT YOUR VCR
SPECIFICATIONS
•
Specifications are subject to change without notice as part of our policy
of continuous improvement.
of continuous improvement.
•
No liability is accepted for any inaccuracies or omissions in this
publication, although every possible care has been taken to make it
complete and as accurate as possible.
publication, although every possible care has been taken to make it
complete and as accurate as possible.
Format:
VHS PAL standard
Number of heads:
Six
Video signal system:
PAL colour or monochrome signal: 625 lines
Maximum playing time:
240 min. with E-240 video cassette in Standard
Play (SP) mode
480 min. with E-240 video cassette in Long Play
(LP) mode
Play (SP) mode
480 min. with E-240 video cassette in Long Play
(LP) mode
720 min. with E-240 video cassette in Extended
Play (EP) mode
Play (EP) mode
Tape width:
12.7 mm
Tape speed:
23.39 mm/s Standard Play (SP)
11.70 mm/s Long Play (LP)
7.8mm/s Extended Play (EP)
11.70 mm/s Long Play (LP)
7.8mm/s Extended Play (EP)
Antenna:
75
Ω unbalanced
Reception channels:
UHF channel 21-69
RF output signal:
UHF channel 21-69
Power requirement:
AC 230-240V, 50 Hz
Power consumption:
17 W approx. (Standby power consumption 2.5W)
Operating temperature:
5 ˚C to 40 ˚C
Storage temperature:
-20 ˚C to 55 ˚C
Video input:
1.0 Vp-p, 75
Ω
Video output:
1.0 Vp-p, 75
Ω
Audio input:
Line1&2: -3.8 dBs, 10 k
Ω, Line3: -3.8 dBs, 47 kΩ
Audio output:
Line1&2: -3.8 dBs, 1 k
Ω, Audio out: -3.8 dBs, 1 kΩ
Hi-Fi audio:
Dynamic range: ~90dBs typ. (SP);
Frequency response: 20 Hz - 20 kHz;
Wow and Flutter: <0.005% Wrm (JIS A)
Frequency response: 20 Hz - 20 kHz;
Wow and Flutter: <0.005% Wrm (JIS A)
Dimensions:
360(W) x 220(D) x 93(H) mm
Weight:
2.6 kg (approx.)
Supplied accessories:
75
Ω RF Connection cable, operation manual,
remote control, AA/R6/UM3 battery (x2)
TINS-A724UMZZ.book Page 32 Monday, January 6, 2003 11:22 AM
Click on the first or last page to see other VC-MH75 (serv.man24) service manuals if exist.