DOWNLOAD Sharp LC-37AD1E (serv.man34) Service Manual ↓ Size: 5.04 MB | Pages: 101 in PDF or view online for FREE

Yo

u can change the colour system to one that is

compatible with the image on the screen.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

• Option menu displays.

Press a/b to select “Colour System”, and
then press OK.

MENU    

[Option ... Colour System]

Option

Audio Out

Input Label

Input Select

Cool Climate

Colour System

[On]

[Fixed]

[AUTO]

Press  a/b to select a compatible video
signal system of your equipment, and then
press OK.

• Some items may be greyed out. They are not

selectable.

AUTO

PAL

SECAM

NTSC 3.58

NTSC 4.43

PAL-60

• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is

automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).

• This function is available for AV input mode and TV tuner

mode.

AV mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.

AV MODE: STANDARD

AV MODE: DYNAMIC

AV MODE: MOVIE

AV MODE: GAME

AV MODE: USER

AV MODE: STANDARD

AV MODE: USER

Press  AV MODE again before the mode
displayed on the screen disappears.

• The mode changes as shown below.

Press AV MODE.

• Present AV mode displays.

For a highly defined image in a normally
bright room

For a clear-cut image emphasising high
contrast for sports viewing

For a movie

Lowers image brightness for easier viewing.

Allows the user to customise settings as
desired. You can set the mode for each
input source.

LC-37AD1E(E)-h

03.11.28, 8:34 AM

75

4:3 Mode set to “Normal”         4:3 Mode set to “Panorama”

For 4:3 “standard” pictures. A side bar appears on each side.

For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on
the top and bottom with some programmes.

In this mode the picture is progressively stretched toward each side of the screen.

For 16:9 squeeze pictures.

For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

WIDE MODE

Normal

Zoom 14:9

Panorama

Full

Cinema 16:9

Cinema 14:9

Press f.

• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable

for the type of video signal currently received.

If you set “WSS” and “4:3 Mode” in the Setup menu on
page 79, the optimum WIDE mode is automatically
chosen for every broadcast containing the WSS
information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup menu
to “On”. (See page 79.)

“4:3 Mode” menu
To set the type of the wide screen, select “Normal” or
“Panorama” in the 4:3 Mode menu. (See page 79.)

• If the broadcast signal contains no WSS information, Auto

Selection will not function even when the WSS option is
enabled.

• This function is available for AV input mode and TV tuner

mode.

• Depends on the selected screen size, upper and lower

part of an image might be cut in DTV mode.

Press  f or a/b while the WIDE MODE
menu displays on the screen.

• As you toggle down the options, each is

immediately reflected on the Display. No need
to press OK.

LC-37AD1E(E)-i

03.11.28, 8:35 AM

76

WIDE MODE

Normal

Full

Dot by Dot

Cinema

(640m480)

(1024m768)

You can select the screen size.

a

Press f.

• The WIDE MODE menu displays.

Press f or a/b to select a desired item on
the menu.

WIDE MODE

Full

Dot by Dot

Cinema

640g480

Keeps the original
aspect ratio in a full
screen display.

An image fully fills
the screen.

Keeps the original
aspect ratio in a full
screen display. The
top and bottom of
the image is slightly
cropped.

Detects the
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.

1024g768

• Connect the PC before making adjustments. (See page

68.)

• Selectable screen size may vary with input signal type.

a

Screen size images.

An image fully fills
the screen.

Keeps the original
aspect ratio in a full
screen display. The
top and bottom of
the image is slightly
cropped.

Detects the
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.

LC-37AD1E(E)-i

03.11.28, 8:35 AM

77

• Some input signals may have to be registered manually

to display properly.

• The pairs of input signals (resolutions) in the list below

are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.

Press MENU and the MENU screen displays.

Press a/b to select “Input Signal” and then
press OK.

MENU    

[Setup ... Input Signal]

Setup

Option

Fine Sync.

Input Signal

Auto Sync.

[English]

[Normal]

Language

Rotate

Press a/b to select the desired input signal
on the display.

640 x 480

848 x 480

720g400

848g480

1280g768

640g400

640g480

1024g768

• You can only select the “Input Signal” on the Setup menu

when receiving one of the 6 input signals listed above.

Press c/d to select “Setup”.

• Setup menu displays.

LC-37AD1E(E)-i

03.11.28, 8:36 AM

78