DOWNLOAD Sharp LC-37AD1E (serv.man34) Service Manual ↓ Size: 5.04 MB | Pages: 101 in PDF or view online for FREE

SCART cable
(commercially available)

You can use the INPUT 1 terminal when connecting a decoder and other audiovisual equipment.

To watch a decoder image, select “INPUT1” from the
“INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display.

The setting is stored and can be selected in the “INPUT
SOURCE” menu.

• Each time b is pressed, the input source toggles.
• If the decoder image does not come in clearly, you may

need to change the input signal type setting on the “Input
Select” menu.

• It is recommended to connect to the INPUT 1 terminal

when using a decoder for ground wave signal input. If
INPUT1 signals are preset in auto installation or
programme setup, make sure to set “Decoder” to
“INPUT1” in the Programme Setup “Manual” menu. (See
page 32.)

• Refer to your decoder operation manual for the signal type.
• See page 73 for how to select the signal type.

MENU    

[Option ... Input Select]

RGB

CVBS

INPUT SOURCE

TV

DTV

INPUT1

INPUT2

INPUT3

INPUT4

PC

LC-37AD1E(E)-g

03.11.28, 8:31 AM

63

SCART cable (commercially available)

You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced “AV Link” systems (see page 65), you can connect the VCR to the
INPUT 2 terminal on the AVC System using the fully-wired SCART cable.

• Download tuning information directly from TV to VCR (Preset download).
• While watching TV, you can record a programme with a one-touch press of the VCR recording button. (WYSIWYR*)

* Refer to your VCR operation manual as some VCRs have an exclusive key for WYSIWYR. See page 65 for details on

“WYSIWYR”.

• When you press the play button on the VCR, the TV automatically turns on from standby and displays a VCR image.
• When you press the system standby button on the VCR, the TV also enters standby mode.

• TV-VCR advanced “AV Link” systems may not compatible with some external sources.
• It is recommended to connect to the INPUT 2 terminal when using a decoder for ground wave signal input with a VCR. If

INPUT 2 signals preset in auto installation or programme setup, make sure to set “Decoder” to “INPUT2” in the Programme
Setup “Manual” menu. (See page 32.)

To watch a VCR image, select “INPUT2” from the
“INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display.

The setting is stored and can be selected in the “INPUT
SOURCE” menu.

• Each time b is pressed, the input source toggles.
• If the VCR image does not come in clearly, you may need

to change the input signal type setting on the “Input Select”
menu.

• Refer to your VCR operation manual for the signal type.
• See page 73 for how to select the signal type.

SCART cable
(commercially available)

MENU    

[Option ... Input Select]

CVBS

Y/C

INPUT SOURCE

TV

DTV

INPUT1

INPUT2

INPUT3

INPUT4

PC

LC-37AD1E(E)-g

03.11.28, 8:32 AM

64

SCART cable
(commercially available)

This System incorporates four typical AV Link functions for smooth connections between AVC System and other
audiovisual equipment.

• Only works when the audiovisual equipment is connected to the INPUT 2 terminal on the AVC System with AV Link via a

fully wired SCART.

While the System is in standby mode, it automatically
turns on and plays back the image from the audiovisual
source (e.g. VCR, DVD).

When the connected audiovisual equipment (e.g. VCR,
DVD) enters standby mode, so does the System.

When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.

Automatically transfers the channel preset information
from the tuner on the System to the one on the
connected audiovisual equipment (e.g. VCR) via the
INPUT 2 terminal.

• Refer to operation manuals of each external equipment

for the details.

LC-37AD1E(E)-g

03.11.28, 8:32 AM

65

Component cable (commercially available)

SCART cable
(commercially available)

When using component
cable, select
“COMPONENT” for
“Input Select” in the
menu.

You can use the INPUT 3 terminal when connecting to a DVD player and other audiovisual equipment.

To watch a DVD image, select “INPUT3” from “INPUT
SOURCE” menu using b on the remote control unit
or INPUT on the Display.

The setting is stored and can be selected in the “INPUT
SOURCE” menu.

• Each time b is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need

to change the input signal type setting on the “Input Select”
menu.

• Refer to your DVD player operation manual for the signal

type.

• See page 73 for how to select the signal type.

MENU    

[Option ... Input Select]

COMPONENT

Y/C

CVBS

RGB

INPUT SOURCE

TV

DTV

INPUT1

INPUT2

INPUT3

INPUT4

PC

LC-37AD1E(E)-g

03.11.28, 8:32 AM

66